Chernye Metally
The Chernye Metally journal No. 8-2021 was published.
The issue is headed by the article written by NUST MISiS authors, dedicated to modernization of the process of transporting the finished mortar to the site for the service of ladles in the JSC Ural Steel blast furnace shop.
In the Steel production section, the existing methods of deoxidation and alloying of steel with aluminum are analyzed and the most promising methods of introduction of aluminum into an iron-carbon melt are proposed.
The Foundry and Metallurgy section presents articles on improving the efficiency of non-stick coatings, the influence of microstructural parameters on improving the toughness of 20 GL steel car castings, the study of metallurgical causes of small-diameter alloy steels wire breakage.
Noteworthy are the articles presented in the Heating and heat treatment section, which tell about the way to improve the thermal operation of heating walking beam furnaces and to study the effect of constant power loads on the strength of the "fitting-shell" joint made of 09G2S grade steel.
S.A. Roginko`s article in the Ecology and recycling section is devoted to the assessment of Russian ferrous metallurgy risks in the case of the introduction of a cross-border corrective carbon tax mechanism.
The traditional annual Yu. L. Adno`s review in the Economy and Finance section analyzes the state and main factors of development of Russian metallurgy in the pandemic, gives a brief assessment of prospects for the world metallurgy development.
This issue also includes publications in the Training and Personnel Policy and Mechanical Engineering Technologies sections.
Please find more details below, or order your printed or electronic version of the Journal.
| Iron making | |
| Название | Manipulator for feeding a box with liquid solution for repair of cast iron buckets at blast furnace shop of JSC Ural Steel |
| Авторы | A. V. Nefedov, Yu. V. Novikova, O. N. Chicheneva |
| Информация об авторах | National University of Science and Technology “MISiS”, Novotroitsk affiliate (Novotroitsk, Russia): A. V. Nefedov, Deputy Director, Cand. Ped., Associate Prof., e-mail: cosnovotr@rambler.ru
National University of Science and Technology “MISiS” (Moscow, Russia): |
| Steel making | |
| Название | Promising directions of using aluminum for steel deoxidation |
| Авторы | Yu. A. Bublikov, A. V. Ivchenko, O. V. Zuev, A. V. Andryushkin |
| Информация об авторах | National Metallurgical Academy of Ukraine (Dnepr, Ukraine): Yu. A. Bublikov, Cand. Eng., Associate Prof., e-mail: yuriy.bublikov@gmail.com
Baku Non Ferrous and Foundry Company Ltd. (Sumgait, Azerbaidzhan):
NPP Vasilkovskiy Ore Reduction Plant (Dnepr, Ukraine): |
| Casting and metal science | |
| Название | Advanced technologies for development of non-stick anti-burn coatings for iron casting |
| Авторы | T. R. Gilmanshina, I. E. Illarionov, E. N. Zhirkov, T. A. Strekalova |
| Информация об авторах | Siberian Federal University (Krasnoyarsk, Russia): I. E. Illarionov, Dr. Eng., Prof., Head of the Dept. “Material science and metallurgical processes”, e-mail: tmilp@rambler.ru |
| Название | Microstructural parameters as indicators of reliability of car castings made of 20GL steel |
| Авторы | R. A. Bogdanov, Yu. M. Markova |
| Информация об авторах | Bryansk State Technical University (Bryansk, Russia): R. A. Bogdanov, Cand. Eng., e-mail: lpim-bra@yandex.ru
National Research Center “Kurchatov Institute” – Central Research Institute of Structural Materials “Prometey” (St. Petersburg, Russia): |
| Название | On the effect of non-metallic inclusions in production of small diameter wires |
| Авторы | V. A. Lutsenko, E. V. Parusov, T. N. Golubenko, O. V. Lutsenko |
| Информация об авторах | Iron and Steel Institute of Z. I. Nekrasov NAS of Ukraine (Dnepr, Ukraine): V. A. Lutsenko, Dr. Eng., Leading Researcher, e-mail: lutsenkovlad2@gmail.com |
| Heating and Heat treatment | |
| Название | Statistical modeling of metal heating in furnaces with walking beams |
| Авторы | A. V. Belenkiy, M. Zh. Bogatova, S. I. Chibizova |
| Информация об авторах | North Caucasus Mining and Metallurgical Institute (State Technological University) (Vladikavkaz, Russia): A. M. Belenkiy, Dr. Eng., Prof., Dept. of Metallurgy of Non-ferrous Metals and Automation of Metallurgical Processes, e-mail: belenky.bam@yandex.ru
National University of Science and Technology “MISiS” (Moscow, Russia): |
| Название | Influence of non-stationary heating on the strength of fittings made of 09G2S steel |
| Авторы | Nguen Wang An, L. N. Moskalev, S. I. Ponikarov |
| Информация об авторах | Kazan National Research Technological University (Kazan, Russia): |
| Ecology and Recycling | |
| Название | EU cross-border carbon tax: risks for Russian metallurgy |
| Автор | S. A. Roginko |
| Информация об авторе | Financial University under the Government of the Russian Federation (Moscow, Russia): S. A. Roginko, Prof., head of the Center for Ecology and Development of the RAS Institute of Europe, e-mail: roginko@bk.ru |
| Название | Influence of metallurgical slag additives on proppants synthesis processes based on drilling muds |
| Авторы | E. A. Yatsenko, B. M. Goltsman, A. A. Tretyak, A. A. Chumakov |
| Информация об авторах | Platov South Russian State Polytechnic University (Novocherkassk, Russia): |
| Machine-building technologies | |
| Название | Extraction of square box parts with lateral pushing and squeezing |
| Авторы | Yu. V. Bessmertnaya, S. N. Larin |
| Информация об авторах | Tula State University (Tula, Russia): Yu. V. Bessmertnaya, Cand. Eng., Associate Prof., Dept. of Plastic Forming Mechanics, e-mail: bessmertny@rambler.ru |
| Economics and Finances | |
| Название | World Metallurgy 2020: Consequences and lessons of the pandemic |
| Автор | Yu. L. Adno |
| Информация об авторе | Institute of World Economy and International Relations (Moscow, Russia): |
| Education of specialists and HR policy | |
| Название | Implementation of the master’s program «Design and investment and construction management in metallurgy» at the Ural Federal University |
| Автор | A. B. Netkachev |
| Информация об авторе | Ural Federal University (Ekaterinburg, Russia): A. B. Netkachev, Cand. Eng., Associate Prof., Specialist in the field of metallurgical facilities design of the Institute of New Materials and Technologies, Metal Forming Dept., e-mail: netkachev_ab@mail.ru |
