Журналы →  Chernye Metally →  2021 →  №9

Chernye Metally


 

The journal "Chernye Metally" No. 9-2021 was published.

 

The issue is opened by the section "Steel production and continuous casting", which contains articles dedicated to the results of the XVI International Congress of Steel Smelters with the participation of 324 specialists, the improvement of the technological process of the reduction cycle of melting steel 20GFL, as well as the development of experimental compositions of flux-cored wires for electric arc surfacing of melting-pulling rollers for the continuous casting machine of JSC "Oskol electrometallurgical plant named after A. A. Ugarov".

 

The section "Foundry and Metallurgy" presents an article by TsNIITMASH specialists about castings and forgings of large thickness from pearlitic steels, and also talks about issues that were covered at the scientific and practical seminar "Innovative engineering solutions in metallurgy and blank production of mechanical engineering", studying the technological process for repair of castings and forgings with large thickness from pearlitic steels by welding.

 

In the sections "Rolling production" and "Production of pipes" modern research in the field of hot strip rolling on a 1950 mill, continuous rolling of pipes on a long retained plug and forming a steel pipe billet on the 1020 TESA line is considered.

 

The section "Metal Science and Metallography" is devoted to the study of the method for processing the results of factory expert opinions for the interpretation of the nature of nonmetallic inclusions, the physicochemical identification of the carbide phases of the "iron - carbon" diagram and the microstructure of Fe - 12% Mn - 1% C alloy ingots.

 

The journal publishes congratulations on the anniversary of a prominent specialist in the field of metallurgy, materials science and diagnostics of materials, academician Konstantin Vsevolodovich Grigorovich.

 

In the same issue, publications are presented in the sections "Machine-building technologies" and "Training of specialists and personnel policy".

 

Please find more details below, or order your printed or electronic version of the Journal.


Steel Making and Continuous Casting
Название Introduction of innovations in steel smelting for critical castings of freight wagon bogies in order to increase their operational reliability
Авторы A. V. Chaikin, V. A. Chaikin, V. V. Kolpakov, +K. N. Vdovin
Информация об авторах

Smolensk regional branch of the Russian Association of Founders (Safonovo, Russia):

A. V. Chaikin, Technical Director, Cand. Eng., e-mail: chaika1983@inbox.ru

 

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

V. A. Chaikin, Dr. Eng., Prof., Dept of Technologies of Foundry Processes and Materials Science, e-mail: sro_ral@mail.ru
K. N. Vdovin, Dr. Eng., Prof., Dept of Technologies of Foundry Processes and Materials Science

 

Rubtsovsky Branch of JSC Altaivagon (Rubtsovsk, Russia):

V. V. Kolpakov, Chief Metallurgist, e-mail: metal@rfav.ru

Название Increase of durability of CCM rollers by electric arc surfacing method with use of promising surfacing materials. Part 1. Structure, phase composition and properties of deposited layers
Авторы A. V. Makarov, A. E. Kudryashov, A. A. Vladimirov, M. A. Baranov
Информация об авторах

Stary Oskol Technological Institute named after A. A. Ugarov (branch) of the National University of Science and Technology “MISiS” (Stary Oskol, Russia):
A. V. Makarov, Cand. Eng., Associate Prof., Head of the Dept. of Technology and Equipment in Metallurgy and Mechanical Engineering named after V. B. Krakht, e-mail: makarov.av@mail.ru

A. A. Vladimirov, Cand. Eng., Leading Lecturer, Dept. of Technology and Equipment in Metallurgy and Mechanical Engineering named after V. B. Krakht

 

National University of Science and Technology “MISiS” (Moscow Russia):
A. E. Kudryashov, Cand. Eng., Leading Researcher of SHS Center, e-mail: aekudr@yandex.ru

 

ASM Group Ltd. (Cherepovets Russia):
M. A. Baranov, Executive Director, e-mail: baranov@asm-swm.com

Casting and Metal science
Название Modeling of thermal fields and structural condition of metal for repair welding of large-thickness castings and forgings from pearlitic steels
Авторы V. G. Volobuev, S. I. Feklistov, A. A. Ershov, G. A. Bilenko
Информация об авторах

RF State Research Centre JSC “RPA “CNIITMASH” (Moscow, Russia):

Yu. S. Volobuev, Cand. Eng., Director of the Welding Technological Center, e-mail: USVolobuev@cniitmash.com
S. I. Feklistov, Dr. Eng., Chief Researcher
A. A. Ershov, Senior Researcher, e-mail: AAErshov@cniitmash.com

 

Ural Federal University named after the first President of Russia B. N. Yeltsin (Ekaterinburg, Russia):
G. A. Bilenko, Assistant, Dept. of Technologies of Construction Production, e-mail: bilenkoga@gmail.com

Название Innovative engineering solutions in metallurgy and blank production of mechanical engineering (based on proceedings of the scientific-practical seminar in Nizhny Novgorod STU named after R.E. Alekseev)
Автор L. I. Leushina
Информация об авторе

Nizhny Novgorod State Technical University named after R.E. Alekseev (Nizhny Novgorod, Russia):

L. I. Leushina, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, e-mail: kafmto@mail.ru

Rolling
Название Study of the friction coefficient during the steady-state process of continuous hot rolling of steel strips in conditions of the 1950 industrial mill
Авторы A. E. Sevidov, A. V. Muntin, A. V. Rumyantsev
Информация об авторах

JSC Vyksa Metallurgical Works (Vyksa, Russia)1 ; Bauman Moscow State Technical University (Moscow, Russia)2:

A. E. Sevidov1,2, Leading Software Engineer, e-mail: sevidov_ae@vsw.ru
A. V. Muntin1,2, Cand. Eng., Deputy Director for Research

 

JSC Vyksa Metallurgical Works (Vyksa, Russia):
A. V. Rumyantsev1, Cand. Eng., Expert

Tubemaking
Название Computer simulation of continuous rolling of tubes on a long retained mandrel
Авторы V. A. Toropov, O. A. Panasenko, A. O. Khalezov, D. Sh. Nukhov
Информация об авторах

JSC Pervouralsk New Pipe Plant (Pervouralsk, Russia):

V. A. Toporov, Managing Director, e-mail: ToporovVA@stw.ru

 

JSC Seversky Pipe Plant (Polevskoy, Russia):
O. A. Panasenko, Head of the pipe-rolling laboratory of the research center, e-mail: PanasenkoOA@stw.ru

 

Ural Federal University named after the first President of Russia B. N. Yeltsin, (Ekaterinburg, Russia):
A. O. Khalezov, Master’s student, Dept. of Metal Forming, e-mail: alekssanja633@mail.ru
D. Sh. Nukhov, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: d.s.nukhov@urfu.ru

Название Taking into account the curvature of non-contact zone of steel pipe billet at its bending on the pre-forming press with non-asymmetrical rocking arm of TESA 1020 line
Автор V. N. Shinkin
Информация об авторе

National University of Science and Technology “MISiS” (Moscow Russia):

V. N. Shinkin, Dr. Phys.-Math., Prof., Dept. of Physics, e-mail: shinkin-korolev@yandex.ru

Metal science and Metallography
Название Interpretation of nature of non-metallic inclusions in assessing the quality of metal products in the industrial conditions
Авторы A. A. Kazakov, V. A. Murysev, D. V. Kiselev
Информация об авторах

Thixomet Ltd. (St. Petersburg, Russia):

A. A. Kazakov, Dr. Eng., Prof., Head of the Metallurgical Expertise Laboratory, e-mail: kazakov@thixomet.ru
D. V. Kiselev, Technical Director

 

JSC Vyksa Steel Works (Vyksa, Russia):

V. A. Murysev, Chief Specialist of the Engineering and Technology Center

Название Phase equilibriums in the carbide area of the «iron-carbon» diagram. Part 1. Physico-chemical identification of carbide phases
Автор S. V. Davydov
Информация об авторе

Bryansk State Technical University (Bryansk, Russia):

S. V. Davydov, Dr. Eng., Prof., Dept. of Tribotechnical Materials Science and Materials Technology, e-mail: fulleren_grafen@mail.ru

Название Influence of microheterogeneity destruction on microstructure and crystal structure of Fe-12% Mn-1%C alloy ingots
Авторы N. I. Sinitsyn, O. A. Chikova, D. S. Chezganov, E. A. Pashnina
Информация об авторах

Ural Federal University (Ekaterinburg, Russia)1 ; Ural State Pedagogical University (Ekaterinburg, Russia)2:
O. A. Chikova1,2, Dr. Phys.-Math., Prof., Dept. of Physics, Institute of Fundamental Education, e-mail: O.A.Chikova@urfu.ru

 

Ural Federal University (Ekaterinburg, Russia):

N. I. Sinitsin, Graduate student of the Dept. of Physics of the Institute of Fundamental Education, e-mail:
n.i.sinitsin@urfu.ru
D. S. Chezganov, PhD, Senior Researcher, Dept. for Optoelectronics and Semiconductor Engineering, Institute of Natural Sciences and Mathematics, e-mail: chezganov.dmitry@urfu.ru
E. A. Pashnina, Laboratory Researcher, Dept. of Optoelectronics and Semiconductor Technology, e-mail: elena.pashnina@urfu.ru

Machine-building technologies
Название Application of digital twins at the life cycle stages of special purpose products
Авторы O. V. Pantyukhin, S. A. Vasin
Информация об авторах

Tula State University (Tula, Russia):

O. V. Pantyukhin, Cand. Eng., Associate Prof., Dept. of Technological systems of food, printing and packaging industries, e-mail: olegpantyukhin@mail.ru
S. A. Vasin, Dr. Eng., Prof., Dept. of Design., e-mail: vasin_sa53@mail.ru

Personnel training and HR policy
Название Issues of vocational and engineering education for development of the mining and metallurgical industry in post-industrial Russia (Part 2)
Авторы V. M. Kolokoltsev, E. Yu. Meshcheryakov
Информация об авторах

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

V. M. Kolokoltsev, Dr. Eng., Prof., President, e-mail: kwm@magtu.ru
E. Yu. Meshcheryakov, Cand. Eng., Associate prof., Head of the Strategic Planning Department, e-mail: ntc@magtu.ru

Журналы →  Chernye Metally →  2021 →  №9