Journals →  Chernye Metally →  2021 →  #11

Chernye Metally


 

The Chernye Metally journal, No. 11-2021, was published, which is mainly dedicated to the anniversary of the united chair for Metallurgy and materials processing technologies of the Sukhoi State Technical University of Gomel. The articles of this section highlight the issues of the effect of the deformation rate on mechanical properties and microhardness of a thin steel wire made of 80 steel, the effect of speed parameters of reduction on the accuracy of the resulting pipe profile, the study of physical and mechanical properties of rapidly quenched strips made of multicomponent iron-based alloys, improving the quality of traditional products due to the use of alloys with unique service properties and the modernization of the Hunter method.

 

The issue of the journal is headed by the Ore dressingsection, where an article by the authors of the Bakor Scientific and Technical Center has been published, which acquaints readers with reasons for a sharp decrease in the filtering ability of ceramic elements, as well as with the search for a solution to restore the filter elementsefficiency.

 

The Steel production and metal sciencesection presents an article ofauthors of the South Ural State University, in which the issues of using hydrogen instead of carbon as a reductant in ferrous metallurgy, as well as the second part of S. V. Davydov's article Phase equilibria in the carbide region of the iron-carbon diagram, which offers a complete diagram of the iron-carbide ε-Fe2C system in the concentration range of 0-9.7% C without lines of graphite and diamond liquidus. The first part of this article was published in No. 9, 2021.

 

In the Rolling and other Metal Forming processessection three articles of authors of the Nosov Magnitogorsk State Technical University has been published, which are devoted to assessing the effect of plastic reduction on the stress-strain state of reinforcing bars, plotting dependencies for choosing rational strip tensions in the digital twin of a cold rolling mill, as well as the peculiarities of the formation of mechanical properties in shaped bars made of 09G2S steel in the process of accelerated water cooling.

 

In the same issue, publications are presented in the Energy, ecology and recyclingsection.

 

The Chronicle section contains material dedicated to the memory of Academician L. A. Vaisberg. 

 

Please find more details below, or order your printed or electronic version of the Journal.


Mineral processing
ArticleName Chemical method of restoring the filtering ability of ceramic filter elements
ArticleAuthors B. L. Krasnyi, I. G. Zimbovskiy, U. V. Dmitrakova, E. D. Chylbak-ool
ArticleAuthorsData

Bakor Scientific and Technical Center Ltd. (Moscow, Russia):

B. L. Krasnyi, Dr. Eng., General Director,, e-mail: bakor@nicbakor.ru
I. G. Zimbovskiy, Cand. Eng., Deputy Chief of the Scientific and Research Center on Dewatering and Enrichment, e-mail: zimbovskiy@nicbakor.ru
U. V. Dmitrakova, Scientific Researcher, Scientific and Research Center on Dewatering and Enrichment, e-mail: dmitrakova@nicbakor.ru

National University of Science and Technology “MISiS” (Moscow, Russia):
E. D. Chylbak-ool, Post-Graduate, Dept of Enrichment and Processing of Mineral Resources and Man-caused Raw Mwterials, e-mail: chylbakool.e@mail.ru

Steelmaking and Metal science
ArticleName Technological and materials science aspects of the transition in ferrous metallurgy to carbon-free processes
ArticleAuthors V. E. Roshchin, A. V. Roshchin, Yu. S. Kuznetsov, Yu. N. Goikhenberg
ArticleAuthorsData

South Ural State University (Chelyabinsk, Russia):

V. E. Roshchin, Dr. Eng., Prof., Dept. of Pyrometallurgical and Foundry Technologies, e-mail: vero@susu.ru
A. V. Roshchin, Dr. Eng., Associate Prof., Dept. of Pyrometallurgical and Foundry Technologies
Yu. S. Kuznetsov, Cand. Eng., Associate Prof., Dept. of Materials Science and Physico-Chemistry of Materials
Yu. N. Goikhenberg, Dr. Eng., Prof., Senior Researcher, Dept. of Materials Science and Physico-Chemistry of Materials

ArticleName Phase equilibriums in the carbide area of the «iron-carbon» diagram. Part 2. Complete diagram of the iron - ε-Fe2C carbide system
ArticleAuthor S. V. Davydov
ArticleAuthorData

Bryansk State Technical University (Bryansk, Russia):

S. V. Davydov, Dr. Eng., Prof., Dept. of Tribotechnical Materials Science and Materials Technology, e-mail: fulleren_grafen@mail.ru

5 years of the united department “Metallurgy and ma-terials processing technology” of Sukhoi State technical University of Gomel
ArticleName Influence of drawing speed on thin wire mechanical properties and microhardness
ArticleAuthors Yu. L. Bobarikin, Yu. V. Martyanov, Ya. I. Radkin, I. A. Tsyrganovich
ArticleAuthorsData

Sukhoi State Technical University of Gomel (Gomel, Belarus):
Yu. L. Bobarikin, Cand. Eng., Associate Prof., Head of the Dept. of Metallurgy and Materials Processing Technology, e-mail: bobarikin@tut.by
Yu. V. Martyanov, Assistant, Dept. of Metallurgy and Materials Processing Technology, e-mail: you_rock@tut.by
Ya. I. Radkin, Senior Lecturer, Dept. of Metallurgy and Materials Processing Technology, e-mail: yradkin@gmail.com
I. A. Tsyrganovich, Post-graduate Student, Dept. of Metallurgy and Materials Processing Technology, e-mail: cyrganovich@gmail.com

ArticleName Strength, plasticity, microhardness and inhomogeneous plastic deformation of strips made of amorphous multicomponent iron-based alloys
ArticleAuthors M. N. Vereshchagin, V. G. Shepelevich, O. M. Ostrikov
ArticleAuthorsData

Sukhoi State Technical University of Gomel (Gomel, Belarus):

M. N. Vereshchagin, Dr. Eng., Professor, Dept. of Metallurgy and Materials Processing Technology
O. M. Ostrikov, Cand. Phys.-Math., Associate prof., Dept. of Mechanics, e-mail: omostrikov@mail.ru

 

Belarusian State University (Minsk, Belarus):

V. G. Shepelevich, Dr. Phys.-Math., Professor, Dept. of Solid State Physics

ArticleName Effect of speed parameters of reduction on the resulting pipe profile accuracy
ArticleAuthors Yu. L. Bobarikin, Ya. I. Radkin, Yu. V. Martyanov, A. V. Strelchenko
ArticleAuthorsData

Sukhoi State Technical University of Gomel (Gomel, Belarus):

Yu. L. Bobarikin, Cand. Eng., Associate Prof., Head of the Dept. of Metallurgy and Materials Processing Technology, e-mail: bobarikin@tut.by
Ya. I. Radkin, Senior Lecturer, Dept. of Metallurgy and Materials Processing Technology, e-mail: yradkin@gmail.com
Yu. V. Martyanov, Assistant, Dept. of Metallurgy and Materials Processing Technology, e-mail: you_rock@tut.by

 

Byelorussian Steel Works - Management company of the “Byelorussian Metallurgical Company” holding (Zhlobin, Belarus):
A. V. Strelchenko, Technological Engineer of the 2nd category, Laboratory of rolling production of the Research center - the Branch laboratory of technology of metallurgical and steel wire production, e-mail: stavr-sany.94@mail.ru

ArticleName Modification of metallic dispersions during high energy processing
ArticleAuthors M. N. Vereshchagin, S. N. Tselueva, M. Yu. Tseluev
ArticleAuthorsData

Sukhoi State Technical University of Gomel (Gomel, Belarus):

M. N. Vereshchagin, Dr. Eng., Professor, Dept. of Metallurgy and Materials Processing Technology
M. Yu. Tseluev, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering Technology, e-mail: tseluev@gmail.com
S. N. Tselueva, Mast. Tech., Senior Lecturer, Dept. of Metallurgy and Materials Processing Technology, e-mail: tselueva@gmail.com

ArticleName Modernization of the Hunter method for testing steel cord in accordance with the operating conditions of a car tire
ArticleAuthors Yu. L. Bobarikin, Yu. V. Martyanov, A. V. Vedeneev, A. V. Khotko
ArticleAuthorsData

Sukhoi State Technical University of Gomel (Gomel, Belarus):

Yu. L. Bobarikin, Cand. Eng., Associate Prof., Head of the Dept. of Metallurgy and Materials Processing Technology, e-mail: bobarikin@tut.by
Yu. V. Martyanov, Assistant, Dept. of Metallurgy and Materials Processing Technology, e-mail: you_rock@tut.by

 

Byelorussian Steel Works - Management company of the "Byelorussian Metallurgical Company" holding (Zhlobin, Belarus):
A. V. Vedeneev, Cand. Eng., Leading Engineer Technologist

 

JSC Belshina (Bobruisk, Belarus):
A. V. Khotko, Head of the Section for Computational Research of Tire Mechanics of the Tire Design and Construction Management of the Engineering and Technical Center, e-mail: hotkoav2017@gmail.com

Rolling and other Metal forming processes
ArticleName The effect of compaction on the stress-strain state of prestressing strands
ArticleAuthors A. G. Korchunov, E. M. Medvedeva, V. A. Kharitonov, D. V. Konstantinov
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

A. G. Korchunov, Dr. Eng., Professor, Vice-Rector on International Affairs, e-mail: international@magtu.ru
E. M. Medvedeva, specialist of the Dept. of International Affairs
V. A. Kharitonov, Cand. Eng., Professor
D. V. Konstantinov, Cand. Eng., Head of the Dept. of International Affairs

ArticleName Justification of strip tension in the cold rolling mill digital twin
ArticleAuthors M. I. Rumyantsev, A. N. Zavalishchin, A. N. Kolybanov, O. N. Esipova
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

M. I. Rumyantsev, Dr. Eng., Professor, Dept. of Materials Processing Technologies, e-mail: mikhail.rumyantsev54@bk.ru
A. N. Zavalishchin, Dr. Eng., Professor, Dept. of Foundry and Materials Science
A. N. Kolybanov, Post-Graduate Student, Dept. of Materials Processing Technologies
O. N. Esipova, Master Student, Dept. of Materials Processing Technologies

ArticleName Features of structure and mechanical properties formation in shaped rolled products made of 09G2S steel in accelerated water cooling process
ArticleAuthors A. B. Sychkov, A. B. Moller, G. Ya. Atangulova, G. V. Agutin
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):
A. B. Sychkov, Dr. Eng., Prof., Dept. of Foundry and Materials Science, e-mail: absychkov@mail.ru
A. B. Moller, Dr. Eng., Prof., Head of Dept. of Materials Processing Technologies, e-mail: a.moller@magtu.ru
G. Ya. Atangulova, Postgraduate Student
G. V. Agutin, Postgraduate Student

Power engineering, Ecology and Recycling
ArticleName New methods of electricity generation using steam from waste heat boilers fired by waste gases from high-temperature plants in ferrous metallurgy
ArticleAuthors V. S. Dubinin, T. A. Stepanova, S. O. Shkarupa, V. P. Krupskiy
ArticleAuthorsData

National Research University «Moscow Power Engineering Institute» (Moscow, Russia):

V. S. Dubinin, Cand. Eng., Associate Prof., e-mail: promteploenergetika@rambler.ru
T. A. Stepanova, Cand. Eng., Associate Prof., Head of the Dept. of Power Engineering of High-Temperature Technology

 

Leonov Moscow Region University of Technology (Korolev, Russia):
S. O. Shkarupa, Head of Laboratory

 

Ekokuber Ltd. (Leskovka, Minsk region, Belarus):
V. P. Krupskiy, Chief Designer

ArticleName Technique for modeling random disturbances of the electric arcs lengths for tuning a nonlinear P-controller of impedance
ArticleAuthors A. A. Nikolaev, P. G. Tulupov
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

A. A. Nikolaev, Cand. Eng., Professor, Head of Dept. of Automated Electric Drive and Mechatronics, e-mail: aa.nikolaev@magtu.ru
P. G. Tulupov, Post-Graduate Student, Dept. of Automated Electric Drive and Mechatronics, e-mail: tulupov.pg@mail.ru

ArticleName Man-made metal-containing waste of I-II class — raw materials for obtaining new products and materials
ArticleAuthors V. A. Kolesnikov, V. A. Brodskiy, D. Yu. Zhukov, A. V. Kolesnikov
ArticleAuthorsData

Mendeleev University of Chemical Technology of Russia (Moscow, Russia):

V. A. Kolesnikov, Dr. Eng., Prof., Head of Dept. of Technology of Inorganic Substances and Electrochemical Processes, e-mail: Kolesnikov-tnv-i-ep@yandex.ru
V. A. Brodskiy, Cand. Eng., Associate Prof., Dept. of Technology of Inorganic Substances and Electrochemical Processes, e-mail: vladimir_brodsky@mail.ru
D. Yu. Zhukov, Cand. Eng., Advisor to the rector, e-mail: dmzhukov@muctr.ru
A. V. Kolesnikov, Cand. Eng., Associate Prof., Dept. of Innovative Materials and Corrosion Protection, e-mail: artkoles@list.ru

Journals →  Chernye Metally →  2021 →  #11