Tsvetnye Metally
In the May issue, the article and the "Enrichment" section presenting the result of the joint work of Ural and Bulgarian scientists on the introduction of columnar flotation machines at the modular concentrator of "Rudmetal" AD (Bulgaria) are of interest.
In this section, the article by the authors N. K. Algebraistova, D. A. Golsman et al. is also worth mentioning. The authors dealt with the actual problem, which is related to the processing of stale tailings of gold recovery factories and proposed a gravity-flotation scheme for their enrichment.
The article by Yu. A. Korol and S. S. Naboychenko published in the section of "Heavy nonferrous metals" is the beginning of a series of publications on the use of tuyeres with a protective shell when converting nickel and copper raw materials.
In the section of "Material Science", there is an extensive selection of articles on aluminum alloys. The problems of their alloying with nickel and rare earth metals, the influence of iron impurities, and the methods of casting on the properties of alloys are discussed.
Please find more details below, or order your printed or electronic version of the Journal.
| BENEFICATION | |
| Название | Application of flotation devices of the CFM series in the scheme of enrichment of lead-zinc ores at the modular concentrator “Rudmetal” AD (Bulgaria) |
| Авторы | Viduetskiy M. G., Garifulin I. F., Yochev I. Sh., Purgin A. P. |
| Информация об авторах | IUPT “Design Institute”, Ural Federal University, Yekaterinburg, Russia: A. P. Purgin, Head of the Enrichment Department
“Rudmetal” AD, Rudozem, Bulgaria: |
| Название | Technology of Co-enrichment of primary and technogenic copper-nickel raw materials |
| Авторы | Evdokimov S. I., Gerasimenko T. E. |
| Информация об авторах | North-Caucasian Mining and Metallurgical Institute (State Technological University), Vladikavkaz, Russia: S. I. Evdokimov, Associate Professor of the Department of Mineral processing, e-mail: eva-ser@mail.ru |
| Название | Technological evaluation of the stale tailings of the processing of gold-containing low-sulfide ore |
| Авторы | Algebraistova N. K., Golsman D. A., Kolotushkin D. M., Prokopev I. V. |
| Информация об авторах | Siberian Federal University, Krasnoyarsk, Russia: N. K. Algebraistova, assistant professor of the department of “Mineral processing”, e-mail address: algebraistova@mail.ru |
| HEAVY NON-FERROUS METALS | |
| Название | Calculation of a lance in a protective shell for the conversion of nickel and copper matte and recommendations for its application |
| Авторы | Korol Yu. A., Naboychenko S. S. |
| Информация об авторах | JSC “Russian Copper Company”, Ekaterinburg, Russia: Yu. A. Korol, Vice President, e-mail: tsvetmet@rudmet.ru
Ural Federal University, Ekaterinburg, Russia: |
| LIGHT METALS AND CARBON MATERIALS | |
| Название | Electrochemical production of aluminum hydroxide, including the removal of iron from aluminum chloride |
| Авторы | Lysenko A. P., Kondrateva E. S., Shilovskiy S. Yu. |
| Информация об авторах | National University of Science and Technology MISiS, Moscow, Russia: A. P. Lysenko, associate professor of the Department of Non-ferrous metals and gold, e-mail address: reikis@yandex.ru |
| RARE METALS AND SEMICONDUCTORS | |
| Название | Purification of technical silicon tetrachloride with optical quality product obtaining |
| Авторы | Chapygin A. M., Belozerov A. V., Gasanov A. A., Apanasenko V. V. |
| Информация об авторах | JSC “Giredmet”, Moscow, Russia: A. M. Chapygin, Leading Researcher |
| COMPOSITES AND MULTIPURPOSE COATINGS | |
| Название | Relationship between mechanical properties and density of Ti obtained by additive technology |
| Авторы | Loginov Yu. N., Stepanov S. I., Yudin A. V., Tretyakov E. V. |
| Информация об авторах | Ural Federal University named after B. N. Eltsin, Ekaterinburg, Russia:
JSC “NPO TSNIITMASH”, Moscow, Russia: |
| MATERIALS SCIENCE | |
| Название | The technology of synthesis of a master alloy with nickel and rare earth aluminides and its influence on the structure formation, segregation processes and properties of aluminum alloys |
| Авторы | Ri E. H., Ri Khosen, Deev V. B., Goncharov A. V. |
| Информация об авторах | Pacific National University, Khabarovsk, Russia: E. H. Ri, Head, Chair of Foundry and Process Metallurgy
V. B. Deev, Professor, Chair of Foundry Technologies and Artistic Processing of Materials, e-mail: deev.vb@mail.ru |
| Название | Influence of continuous casting on the structure and properties of 1013 (AD1) alloy castings |
| Авторы | Sergeeva A. M., Lovizin N. S., Sosnin A. A., Mansurov Yu. N. |
| Информация об авторах | Institute of Engineering Science and Metallurgy FEB RAS, Komsomolsk-on-Amur, Russia: A. M. Sergeeva, Deputy Director for Research
National University of Science and Technology “MISiS”, Moscow, Russia: |
| Название | Effect of iron on the structure, hardening and physical properties of the alloys of the Al – Zn – Mg – Ca system |
| Авторы | Shurkin P. K., Dolbachev A. P., Naumova E. A., Doroshenko V. V. |
| Информация об авторах | National University of science and technology “MISiS”, Moscow, Russia: P. K. Shurkin, Engineer of the Department of Metal Forming, e-mail: pa.shurkin@yandex.ru |
| Название | Influence of the chill-mold casting process on the structure and properties of aluminum alloys with eutectic constituents |
| Авторы | Mansurov Yu. N., Aksenov A. A., Reva V. P. |
| Информация об авторах | National University of science and technology “MISiS”, Moscow, Russia: Yu. N. Mansurov, Professor of the Dapartment of Metals Science of Non-Ferrous Metals, e-mail: yulbarsmans@gmail.com Far Eastern Federal University, Vladivostok, Russia: |
| METAL PROCESSING | |
| Название | Development and characterization of the manufacturing process of cylindrical-shaped semi-finished products from non-ferrous alloys for stamping on the basis of modeling |
| Авторы | Lisunets N. L., Demetrashvili I. S., Hoang Man Goyi |
| Информация об авторах | National University of science and technology “MISiS”, Moscow, Russia: N. L. Lisunets, Associate professor of the department of metal forming, e-mail: lisunec@yandex.ru |
| Название | Formation of the homogeneous structure of cast large-sized blades of gas turbine devices |
| Авторы | Yakovlev E. I., Berestevich A. I., Zhabrev S. B. |
| Информация об авторах | FSUE “VIAM”, Moscow, Russia: E. I. Yakovlev, Leading engineer, e-mail: y-e-i@yandex.ru
PC “ODK-Saturn”, Rybinsk, Russia: |
