Journals →  Chernye Metally →  2018 →  #9

Chernye Metally


The ninth issue of the “Chernye metally” journal is presented by its traditional sections, and an insert dedicated to the 70th anniversary of Victor Rashnikov, Chairman of the Board of Directors of PJSC MMK, opens it.


The results of the international youth scientific-practical conference Magnitogorsk Rolling Practice 2018 held at the MSTU named after G. I. Nosov have been introduced by A. G. Korchunov, the Chairman of the Organizing Committee, Vice-Rector for International Affairs.


In the “Steel Production” section, domestic experts published studies on increasing the efficiency of steel deoxidation and desulfurization due to a new deoxidizing mixture, a distinctive feature of which is the dispersity of the components, as well as new recommendations for improving the slag mode of electric smelting, which can improve the lining service life. The publication of foreign researchers described the shock pulse method which for the first time provides accurate information about the state of slowly rotating parts of equipment.


The "Continuous Casting and Foundry Engineering" section presents research on indirect and direct methods for assessing the secondary metal oxidation processes in a continuous caster tundish during casting, on the effect of alloying by nitrated ferrochrome on the surface strength of high-manganese steel castings, and on increasing the modifying and refining effect when using a pulsed impact of an additional high-intensive source, operating on the basis of electropulse effect, on the molten iron.


Results of theoretical and experimental studies of the lubricant film thickness in the friction units are in publications of the "Repair and Maintenance" section.


There are also publications in the "Metrology and Standardization" and "Economics and Finance" sections.

Please find more details below, or order your printed or electronic version of the Journal.

Exhibitions and conferences
ArticleName Magnitogorsk Rolling Practice 2018 — International youth scientific-practical conference in the Nosov Magnitogorsk State Technical University
ArticleAuthor A. G. Korchunov

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

A. G. Korchunov, Dr. Eng., Prof., Vice Recor on International Affairs, e-mail:

ArticleName Anniversary of Viktor Filippovich Rashnikov
Steel making
ArticleName The new material for steel diffusive deoxidizing in the unit for complex steel treatment
ArticleAuthors V. A. Chaikin, A. V. Chaikin, A. D. Kasimgazinov, P. O. Bykov

Nosov Magnitogorsk state technical university (Magnitogorsk, Russia):

V. A. Chaikin, Dr. Eng., Prof., e-mail:


Smolensk regional branch of the Russian association of foundrymen (Smolensk, Russia):
A. V. Chaikin, Cand. Eng., Technical director, e-mail:


“Casting” LLC (Pavlodar, Kazakhstan):
A. D. Kasimgazinov, Chief technologist, e-mail:


Toraygirov Pavlodar state university (Pavlodar, Kazakhstan):
P. O. Bykov, Cand. Eng., Vice rector on academic work, e-mail:

ArticleName Increase of lining resistance of electric arc furnaces by improving the slag procedure with use of magnesium-containing materials
ArticleAuthors E. A. Shevchenko, A. N. Shapovalov, E. V. Bratkovskiy

Novotroitsk affiliate of the National University of Science and Technology (Novotroitsk, Russia):

E. A. Shevchenko, Cand. Eng., Associate Prof., Chair of metallurgical technologies and equipment, e-mail:
A. N. Shapovalov, Cand. Eng., Associate Prof., Head of the Chair of metallurgical technologies and equipment
E. V. Bratkovskiy, Cand. Eng., Associate Prof., Chair of metallurgical technologies and equipment

ArticleName Possibilities of EAF slag usage in cement production
ArticleAuthors D. Algermissen, A. Ehrenberg

Research Institute of Building Metarials — FEhS (Duisburg, Germany):

D. Algermissen, Mag. Sci., Head of dept. of secondary and slag metallurgy
A. Ehrenberg, Dr. Eng., Head of dept. of building materials, e-mail:

ArticleName Control of steelmaking equipment parameters
ArticleAuthors A. Mayrhofer, F. Hartl, A. Rohrhofer, R. Stohl

Primetals Technologies Austria GmbH (Linz, Austria):

A. Mayrhofer, e-mail:

F. Hartl

A. Rohrhofer

R. Stohl

Continuous Casting and Foundry Processes
ArticleName Methods for evaluating the secondary oxidation of the steel in CCM tundish. Part 1. Practical examples of estimation of secondary oxidation
ArticleAuthors D. V. Morov, S. A. Botnikov, V. N. Lavrov

Vyksa Steel Works (Vyksa, Russia):

D. V. Morov, Head of the Casting and rolling complex
S. A. Botnikov, Technologist of steelmaking production, e-mail:
V. N. Lavrov, Head specialist of the dept. of metallurgical processes and technologies of the scientific-technical center

ArticleName The concepts of perspective modernization using tested and approved continuous casting technology
ArticleAuthors L. Fischer, J. Bausch, I. Hullen, Ch. Frohling, M. Rzepczyk, T. Brand, I. Knopp, H.-G. Brass

SMS group GmbH (Düsseldorf, Germany):

L. Fischer, Head of project management, Continuous casting dept., e-mail:
J. Bausch, Sales manager, Continuous casting dept.
I. Hüllen, Dr., Head of the Process, Continuous casting dept.
Ch. Fröhling, Dr., Vice President, Continuous casting dept.
M. Rzepcyk, Executive Vice president, Metallurgical plants and environmental technology division


thyssenkrupp Steel Europe (Duisburg, Germany):
T. Brand, CEO BU Steel production
I. Knopp, Head of slab production Beeckerwerth
H.-G. Brass, Head of slab production Beeckerwerth

ArticleName Wear of high-manganese steel castings
ArticleAuthors K. N. Vdovin, N. A. Feoktistov, D. A. Gorlenko, N. V. Koptseva

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

K. N. Vdovin, Dr. Eng., Prof., Head of the chair of metallurgy and casting processes, e-mail:
N. A. Feoktistov, Cand. Eng., Associate Prof., Chair of metallurgy and casting processes
D. A. Gorlenko, Cand. Eng., Senior lecturer, Chair of metallurgy and casting processes
N. V. Koptseva, Cand. Eng., Prof., Chair of metallurgy and casting processes

ArticleName Modifying, refining and degassing of cast iron melts through impulse action
ArticleAuthors V. N. Gushchin, V. A. Ulyanov, T. D. Kurilina, G. A. Gevorgyan

Nizhny Novgorod State Technical University (Nizhniy Novgorod, Russia):

V. N. Gushchin, Dr. Eng., Prof., Chair “Metallurgical technologies and equipment”, e-mail:
V. A. Ulyanov, Dr. Eng., Prof., Chair “Metallurgical technologies and equipment”
T. D. Kurilina, Senior lecturer, Chair “Metallurgical technologies and equipment”
G. A. Gevorgyan, Post-graduate, Chair “Metallurgical technologies and equipment”

Repair and Technical Maintenance
ArticleName Effect of operating modes and contact surface oil absorption on lubricant film thickness in heavy-duty friction units of metallurgical plants
ArticleAuthors D. V. Terentyev, N. N. Ogarkov, S. I. Platov, A. V. Kozlov

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

D. V. Terentyev, Cand. Eng., Associate Prof., Chair of metal forming machines and technologies, e-mail:
N. N. Ogarkov, Dr. Eng., Prof., Chair of metal forming machines and technologies
S. I. Platov, Dr. Eng., Prof., Head of the Chair of metal forming machines and technologies


South Ural State University (Chelyabinsk, Russia):
A. V. Kozlov, Dr. Eng., Prof., Chair “Machine-building technology, machine tools”

Metrology and Standardization
ArticleName Metrological provision of correspondence evaluation for metallurgical products
ArticleAuthors O. I. Boriskin, D. I. Blagoveshchensky, G. A. Nuzhdin, E. I. Khunuzidi

Tula State University (Tula, Russia):

O. I. Boriskin, Dr. Eng., Prof., Head of the Chair of Instrumental and Metrological Systems, Director of Polytechnic Institute


State Regional Center for Standardization, Metrology and Testing in Tula Region (Tula, Russia):
D. I. Blagoveshchensky, Cand. Eng.


National University of Science and Technology “MISiS” (Moscow, Russia):
G. A. Nuzhdin, Cand. Eng., Associate Prof., e-mail:
E. I. Khunuzidi, Cand. Eng.

Economics and finances
ArticleName Comparative analysis of expenses for section rolling mills in different European and American countries
ArticleAuthor S.-E. Lundberg

University of Gävle (Gävle, Sweden):

S.-E. Lundberg, Dr., Prof., Dept. of Mechanical Engineering, e-mail:

* * *
ArticleName Iron and steel news
Journals →  Chernye Metally →  2018 →  #9