Journals →  Chernye Metally →  2016 →  #1 →  Back

Development of Metallurgy in Russia and other CIS countries
ArticleName Study of the effect of piercing plugs manufacturing technology on structural features of superficial and internal oxide layers
ArticleAuthor M. Yu. Chubukov, D. V. Rutskiy, N. A. Zyuban, D. P. Uskov
ArticleAuthorData

Volgograd State Technical University (Volgograd, Russia):

M. Yu. Chubukov, Post-graduate, the Chair “Technology of Materials”,
D. V. Rutskiy, Dr. Eng., Ass. Prof., the Chair “Technology of Materials”,
N. A. Zyuban, Dr. Eng., Ass. Prof., Head of the Chair “Technology of Materials”, e-mail: tecmat@vstu.ru

 

Volzskiy Pipe Plant (Volzhskiy, Russia):
D. P. Uskov, Head Specialist on Material Science

Abstract

It is established in this work that the forged piercing plug is characterized by more favorable macrostructure (lack of a holes and shrinkable friability, existence of a fine microstructure) in comparison with the cast one. The positive effect is reached by comminution of structure during deformation and it can be reduced at smelting stage due to formation of nonmetallic inclusions. It is shown that forged piercing plug has larger contamination by impurity nonmetallic inclusions, and it reduces quality of piercing plugs. The used annealing mode allows to receive an oxide layer no more than 155 microns thick with favorable development of structure of internal and superficial oxide layers and with strong coupling with the main metal layer; however, this layer thickness is obviously insufficient. The research on the electronic scanning microscope has revealed structure of a boundary layer adjacent to a metal surface. It has a structure in the form of stalagmites, and represents the oxide-metal composition containing chaotically located particles from oxides of iron and nickel oxides and other alloying elements being a part of steel composition. The method of piercing plugs production (molding in a sandy-argillaceous form or machining of forged preparation) don't influence on thickness and composition of oxide layers formed during annealing.

keywords Piercing plugs, wear resistance, rolling, seamless pipes, macrostructure, microstructure, oxidizing annealing, oxide layer, nonmetallic inclusions
References

1. Vavilkin N. M., Goncharov V. S., Bodrov D. V. et al. Osobennosti iznosa vodookhlazhdaemykh opravok pri proshivke legirovannykh staley (Peculiarities of wear of water-cooling mandrels during alloyed steel broaching). Izvestiya vuzov. Chernaya metallurgiya = Proceedings of universities. Ferrous metallurgy. 2009. No. 7. pp. 37–40.
2. K. Serin, H. J. Pehle. Povyshennaya stoykost instrumenta goryachey obrabotki pri proizvodstve besshovnykh trub (Improved service life for hot rolling tools in seamless tube plants). Chernye Metally = Ferrous metals. 2015. No. 3. pp. 59–67.
3. Serin K., Pehle H. J. Improved service life of hot forming tools in seamless tube plants. Stahl und Eisen. 2014. Vol. 134, Iss. 11. pp. 161–174.
4. Sycheva S. S., Petrova V. F., Kustova A. N., Dubtsov Yu. N. Issledovanie prichin razrusheniya proshivnykh opravok iz stali 20Kh-2N4MF (Investigation of the reasons of destruction of piercing mandrels made of steel 20Kh2N4MF (20Х2Н4МФ)). Izvestiya Volgogradskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya «Problemy materialovedeniya, svarki i prochnosti v mashinostroenii» = Proceedings of Volgograd State Technical University. Series “Problems of materials science, welding and durability in mechanical engineering”. 2015. No. 5, Iss. 11. pp. 122–124.
5. Sokolov G. N., Litvinenko-Arkov V. B., Lysak V. I. Sposoby povysheniya resursa proshivnykh opravok truboprokatnykh stanov (Methods of expanding of resource of tube mill piercing mandrels). Zagotovitelnye proizvodstva v mashinostroenii = Blanking Productions in Mechanical Engineering. 2011. No. 11. pp. 10–14.
6. Chuvaga A. P., Fiskin B. M., Frolochkin V. V., Balandina L. A. Povyshenie stoykosti opravok stana press-valkovoy proshivki na TPA 159-426 (Increasing of resistance of press piercing mill mandrels on TPA 159-426 (ТПА 159-426)). Stal = Steel in Translation. 2000. No. 2. pp. 51–51.
7. Cui Xiang-hong, Shan Jun, Yang Zi-run, Wei Minxian, Wang Shuqi, Dong Chuang. Alloying design for high wear-resistant cast hot-forging die steels. Journal of Iron and Steel Research. 2008. Vol. 15(4). pp. 67–72.
8. Kazuhiro Shimoda et al. Seamless metal tube producing method : pat. 1593411 А1 Japan : Int. Cl/B21B 19/04, B21B 25/00.
No. 03777358.7. Date of filling 08.12.2003. Date of publication 09.11.2005.
9. Akira Yorifuji et al. Plug and mandrel bar for seamless steel pipe rolling operation for manufacturing seamless steel pipe : pat. 6202463 B1 US : Int. B21B 17/10,B21B 19/04. No. 09/214935. Date of filling 22.12.1997. Date of publication 09.06.1998.
10. Khankin G. O., Brodskiy V. M., Lisovaya G. V. Sravnitelnaya kharakteristika vodookhlazhdaemykh opravok proshivnogo stana, izgotovlennykh razlichnymi sposobami (Comparative characteristics of water-cooling mandrels of mandrel mill, manufactured by various methods). Stal = Steel in Translation. 2004. No. 8. pp. 60–62.
11. Chervyakov A. N., Kiseleva S. A., Rylnikova A. G. Metallograficheskoe opredelenie vklyucheniy v stali : uchebnoe posobie (Metallography finding of impurities in steel : tutorial). Moscow : State
scientific-technical publishing house for ferrous and non-ferrous metallurgy literature, 1962. 250 p.
12. Vinograd M. I. Vklyucheniya v stali i ee svoystva (Impurities in steel and its properties). Moscow: Metallurgizdat, 1963. 252 p.
13. K. Serin, H. J. Pehle. Sposob izgotovleniya instrumenta dlya goryachey deformatsii (Method of manufacturing of instrument for hot deformation). Patent DE, No. 250817, IPC B 21 B 25/00. SMS MEER GMBKh (DE), 2015.
14. Available at: https://www.stahleisen.de/Portals/stahleisen/11-TTPehle_Originalversion.pdf.
15. Sazonenko I. O., Zemtsov V. A., Yurchak A. N. K voprosu povysheniya stoykosti opravok proshivnykh stanov (To the question about the increasing of resistivity of mandrels of mandrel mills). Lite i metally = Casting and metals. 2012. No. 4. pp. 135–138.
16. Temlyantsev M. V., Mikhaylenko Yu. E. Okislenie i obezuglerozhivanie stali v protsessakh nagreva pod obrabotku davleniem (Oxidation and decarburization of steel in the processes of heating for plastic metal working). Moscow : Teplotekhnik, 2006. 200 p.
17. Perepyatko V. N., Temlyantsev N. V., Temlyantsev M. V., Mikhaylenko Yu. E. Nagrev stalnykh slyabov (Heating of steel slabs). Moscow : Teplotekhnik, 2008. 192 p.

Language of full-text russian
Full content Buy
Back