Journals →  Chernye Metally →  2018 →  #11 →  Back

60th anniversary of the Metal forming chair of the Lipetsk State Technical University
ArticleName Mathematical description of the formation of non-flatness of strips during heat treatment in a continuous annealing aggregate
ArticleAuthor A. I. Bozhkov
ArticleAuthorData

Lipetsk State Technical University (Lipetsk, Russia):

A. I. Bozhkov, Cand. Eng., Prof., Chair of Metall Forming, e-mail: bozhkov_51@mail.ru

Abstract

The mathematical model for formation of non-flatness in the strips of electrotechnical isotropic steel during heat-treatment in a continuous annealing line is presented. The urgency of the developed model is caused not only by the toughening of the requirements of consumers to the product quality of the rolling mills, but also by the absence in the technological chain of production of dressing and straightening operations that could provide high flatness and the required product type. The mathematical model of strip non-flatness a heat treated in a continuous annealing line described in the article is constructed taking into account the laws of its formation, established in theoretical and experimental studies. The model includes three submodels with which it is possible to calculate the non-uniformity of the temperature distribution across the width of the strips as a function of their cooling rate, the internal residual stresses arising in the strip due to this unevenness, and the characteristics of the actual non-flatness of the annealed strips formed under the action of residual stresses. The paper provides description of the first submodel - the differential equation of nonstationary thermal conductivity under boundary conditions of the third kind, taking into account the heat exchange by radiation on the upper and lower surfaces of the strip. Based on the results of the study, an experimental verification of the mathematical model of the formation of non-planarity of heat-treated in the continuous annealing line was carried out, confi rming the adequacy of the model presented.

keywords Trip, non-flatness, continuous annealing, mathematical model, cooling, cooling rate, residual stresses, temperature unevenness, deformation, plastic deformation
References

1. Novikov I. I. Theory of heat treatment of metals. Tutorial 2 edition. Moscow: Metallurgiya, 1974. 400 p.
2. Ginzburg V. B. Flat-rolled steel processes: Advanced technologies. CRC Press: 2009. 372 p.
3. Zolotarevsky V. S. Mechanical properties of metals. Moscow: Izdatelstvo Moskovskogo institute stali i splavov, 1998. 400 p.
4. Bozhkov A. I. et al. Improvement of flatness of electrotechnical isotropic steel sheet. Report 1. Study of temperature fields during continuous annealing. Proizvodstvo prokata. 2013. No. 6. pp. 11–19.
5. Bernst R. Technology of steel heat treatment. Translation from German. Bernst R., Bemer Z., Ditrikh G. et al. Moscow: Metallurgiya, 1981. 608 p.
6. Bozhkov A. I. et al. Improvement of flatness of electrotechnical isotropic steel sheet. Study of sheet flatness formation. Proizvodstvo prokata. 2015. No. 2. pp. 3–10.
7. Bozhkov A. I. et al. Improvement of flatness of electrotechnical isotropic steel sheet. Report 2. Building mathematical model for formation of annealed sheet flatness. Proizvodstvo prokata. 2013. No. 9. pp. 26–31.
8. Lange E. Innovative technological models for optimization of flat rolling. Chernye Metally. 2017. No. 9. pp. 42–45.
9. Adamczyk J., Grajcar A. Effect of heat treatment conditions on the structure and mechanical properties of DP-type steel, Journal of Achievements in Materials and Manufacturing Engineering. 2006. Vol. 17, Iss. 1-2. pp. 305–308.
10. Kotov V. V., Sergeev K. I., Troyanov V. A., Belikov S. V. Application of mathematical modeling at the selection of a heat treatment mode. Metallurg. 2014. No. 11. pp. 85–90.
11. Sidorov D. V., Gavrina O. A., Berko I. A., Galkina O. Yu. Review of methods for constructing mathematical models of statistical modes for controlling continuous technological processes. Uspekhi sovremennoy nauki i obrazovaniya. 2016. Vol. 4. No. 12. pp. 9–12.
12. Knyazev Ya. O., Osadchy V. Ya. Development of technological processes using the finite element analysis method. Proizvodstvo prokata. 2015. No. 5. pp. 38–41.
13. Papshev I. S., Bulatova I. G. Calculation accuracy when programming numerical integration algorithms. Inzhenerny vestnik. 2013. No. 12. pp. 3.
14. Shustrova M. L., Fafurin A. V. Basics of experimental research planning. Tutorial. Kazan: Kazansky natsionalny issledovatelsky technologichesky universitet, 2016. 84 p.
15. Sergeeva A. M. The derivation of the normal equations system by the least squares method for multivariate regression. Nauka i obrazovanie segodnya. 2017. No. 11 (22). pp. 5–7.
16. Kawałek A. Teoria i technologia asymetrzcynego procesu walcowania wyrobów płaskich. Seria: Monografie nr. 54. Częstochowa 2016. 224 p.

Language of full-text russian
Full content Buy
Back