Journals →  Chernye Metally →  2018 →  #11 →  Back

Ironmaking
ArticleName Measurement of the melt level in the blast furnace using strain indicators
ArticleAuthor J.-F. Stumper, R. Mancini, R. Lin
ArticleAuthorData

TMT Tapping Measuring Technology (Luxembourg, Luxembourg):

J.-F. Stumper, Dr. Eng.
R. Mancini, Mag. Eng.
E-mail (common): contact@tmt.com


AG der Dillinger Hüttenwerke (Dillingen, Germany):
R. Lin, Dr. Eng.

Abstract

This project is devoted to visualization of the measuring system integrated in BFXpert system of Paul Wurth company. Thereby the results are accumulated in the central database and can be used at any time. The small part of required technological data (temperature, air slow pressure) has technical and measuring restrictions, e.g. during measurements of eddy flows. Special algorithms monitor such effects and evaluate actuality of conducted variations. Efficiency of the measuring system can be verified by the melt level measurements. The positive effect of usage of this system has been achieved at the blast furnace No. 5 of ROGESA (Roheisengesellschaft Saar) company in the following processes and parameters: residual slag amount control; warning about reaching of the critical level; preparing of pneumatic gun for closing a tap hole when melt is close to the critical level; varying of maximal values of the melt level; tap hole stability evaluation etc.

keywords Melt level, measuring, blast furnace, strain indicator, electromotive force, mass balance, hearth, nitrogen
References

1. Alter, M.; Brunner, J.; Holmes, D.: Iron & Steel Tech. 10 (2013). Nr. 3, S. 43/50.
2. Brännbacka, J.; Saxén, H.: Chem. Eng. Sc. (2004) Nr. 59, S. 3423/32.
3. Desai, D.: Trans. ISS 19 (1992) Nr. 7, S. 47/52.
4. Ito, T.; Junichi, Y.; Nagamune, A.: ISIJ Intern. 54 (2014) Nr. 11, S. 2618/22.
5. Mancini, R.; Stumper, J. F.; Lin, R.; Bodeving, C.: Liquid level measurement in the blast furnace and tapping strategy optimization, Proc. AISTech 2017, 8.–11. Mai 2017, Nashville, USA.

Language of full-text russian
Full content Buy
Back