Journals →  Chernye Metally →  2019 →  #3 →  Back

Foundry Processes and Metal Science
ArticleName Microstructure and abarizive wear resistance of heavy duty parts from high-strength cast iron in chisel plows
ArticleAuthor L. V. Kostyleva, D. S. Gapich, V. A. Motorin, A. E. Novikov.
ArticleAuthorData

Volgograd State Agricultural University (Volgograd, Russia):

L. V. Kostyleva, Dr. Eng., Prof.
D. S. Gapich, Dr. Eng., Prof., Head of the Chair “Operation and Technical Maintenance of Machinery in the Agroindustrial Complex”
V. A. Motorin, Cand Eng., Associate Prof.

 

Volgograd State Technical University (Volgograd, Russia):
A. E. Novikov, Dr. Eng., Prof., Head of the Chair “Processes and Machinery of Сhemical and Food Production”, e-mail: novikov-ae@mail.ru

Abstract

The work is aimed at solving the actual problem of the agroindustrial complex – increasing the resource of the most loaded parts of the working organs of tillers by applying effective and economically sound manufacturing techniques from inexpensive materials whose high performance properties are ensured by optimal structuring. It is shown that high-strength cast iron with nodular graphite is a promising material for the production of chisel plow bits. It is established that the change in the structure of Ductile iron by correcting the chemical composition and thermokinetic effects during solidification and heat treatment, contributes to the formation of the optimal structure and the required range of performance properties: wear resistance, strength and resistance to impact loads. The results of comparative tests for the wear of Ductile Iron specimens with different types of structure obtained by thermal treatment are compared with those traditionally used for the production of cutting blades of chisel plows with 45 and 65G steels and also with foreign steel Hardox 450. It has been proved that Ductile Iron with bleaching of the surface layer of the working surface has the maximum wear resistance. It is proposed to make cutting blades of chisel plows by casting from Ductile Iron, followed by isothermal quenching and local bleaching of the cutting edge by electric arc heating of the surface to be reflowed. Replacement of expensive materials and technologies for the use of undoped Ductile Iron with a wear-resistant structure significantly reduces the prime cost of parts of the working organs of tillers. The proposed technology for obtaining castings for the manufacture of cutting blades of working organs of tillage machines will improve their operational reliability.
The study was financially supported by the grant of RF President, № MD-1125.2017-8.

keywords Chisel plow, wear resistance and impact resistance, highstrength cast iron with nodular graphite, bleaching surface, isothermal hardening for bainite, cementite and graphite eutectics
References

1. Novikov V. S. Ensuring durability of tillage machines' work members: thesis of inauguration of Dissertation … of Doctor of Engineering Sciences. Moscow, 2008. 38 p.
2. Pyndak V. I., Novikov A. E. Tribotechnical and Energy Assessment of Parts of Working Members of Cultivating Machines After Carburizing and Laser Hardening. Metal Science and Heat Treatment. 2016. Vol. 58, No. 3-4. pp. 226–230.
3. Ovchinnikov A. S., Mezhevova A. S., Novikov A. E., Fomin S. D., Pleskachev Yu. N., Borisenko I. B., Zvolinsky V. P., Tyutyuma N. V., Vorontsova E. S. Energy and agrotechnical indicators in the testing of machine-tractor units with subsoiler. ARPN Journal of Engineering and Applied Sciences: [online journal]. 2017. Vol. 12, No. 24. pp. 7150–7160.
4. Pyndak V. I., Novikov A. E. Energy Efficiency of Mechanisms and Instruments for Deep Cultivation of Soil. Journal of Machinery Manufacture and Reliability. 2014. Vol. 43, No. 6. pp. 532–536.
5. Kostyleva L. V., Ovchinnikov A. S., Gapich D. S., Fomin S. D. Gradient hardening chisel plow from nodular iron. ARPN Journal of Engineering and Applied Sciences: [online journal]. 2017. Vol. 12, No. 7. pp. 2085–2091.
6. Resource is higher, expenses are lower. Gornaya promyshlennost. 2005. No. 5 (63). pp. 30–31.
7. Dunaev V. S., Kipriyanov F. А. HARDOX steel. Application practice. The first stage in science: Proceedings of the II annual scientific and practice student conference (13 March 2013). VGMKhА. Vologda-Molochnoe, 2013. pp. 3–6.
8. Kostyleva L. V., Gapich D. S., Borisenko I. B. Challenges during exploitation of chisel plows` work members and ways for their solution. Izvestiya Nizhnevolzhskogo agrouniversitetskogo kompleksa: nauka i vysshee professionalnoe obrazovanie. 2015. No. 3. pp. 174–179.
9. Gabelchenko N. I., Belov А. А., Kidalov N. А., Gabelchenko А. I., Volkova N. V. Study of wear-resistance materials for beaters of mixers-air pumps. Izvestiya Samarskogo nauchnogo tsentra RAN. 2016. Т. 18. No. 1. pp. 175–178.
10. Perelygin V. Hardox. Let's understand easy. Osnovnye Sredstva. 2008. No. 12. Available at: https://os1.ru/article/7515-hardoxrazberemsya-spokoyno (accessed: 26.03.2018).
11. Silva A. P., De Souza Parreiras C., Do Carmo D. J., Machado I. M. L. Application of tempered nodular cast iron (ADI) in machines for agricultural implements. Metalurgia and Material. 2003. Vol. 59, Iss. 533. pp. 3–7.
12. Liu J., Li G., Zhang H., Bian B., Xia X., Yang Z., Zeng Y., Ye X. Study on microstructure and properties of carbidic Austempered ductile iron (CADI). 69th World Foundry Congress, 16-20 October 2010. China, Hangzhou. 2010. Vol. 2. pp. 423–426.
13. Cast Metals Development Ltd. Austempered ductile-iron castings – advantages, production, properties and specifications. Materials and Design. 1992. Vol. 13, Iss. 5. pp. 285–297.
14. Keough J. R., Hayrynen K. L., Summer S., Popovski V., Rimmer A. Agricultural Applications of Austempered Iron and Steel Components. Available at: http://file.seekpart.com/keywordpdf/2010/12/31/20101231101930531.pdf (accessed: 26.03.2018).
15. Hayrynen K. L., Brandenberg K. R. Carbidic Austempered Ductile Iron (CADI) – The New Wear Material. Transactions of the American Foundry Society. 2003. Vol. 111. pp. 845–850.
16. Patil S. A., Pathak S. U., Likhite Ajay. Development and Wear Analysis of Carbidic Austempered Ductile Iron (CADI). International Journal of Innovative Research in Science, Engineering and Technology: [online journal]. 2014. Vol. 3, Iss. 2. pp. 9652–9657.
17. Makarenko K. V. About obtaining mottled iron with ausferrite structure from the cast state. Liteynoe proizvodstvo. 2010. No. 2. pp. 2–6.
18. GOST 9012-59. Metals. Method of Brinell hardness measurement. Intoduced: 01.01.1960
19. GOST 9013-59 (ISO 6508-86). Metals. Method of measuring Rockwell hardness. Intoduced: 01.01.1969
20. GOST 9454-78. Metals. Method for testing the impact strength at low, room and high temperature. Introduced: 01.01.1979
21. GOST 17367-71. Metals. Method of abrasion test by friction against embedded abragant grain. Introduced: 01. 01. 1973
22. GOST 8233-56. Steel. Microstructure standards. Introduced: 01.07.1957

Language of full-text russian
Full content Buy
Back