Журналы →  Tsvetnye Metally →  2020 →  №1 →  Назад

Название Use of mechanical activation to improve the performance of anode cover material
DOI 10.17580/tsm.2020.01.08
Автор Yushkova O. V., Yasinskiy A. S., Polyakov P. V., Yushkov V. V.
Информация об авторе

Siberian Federal University, Krasnoyarsk, Russia:

O. V. Yushkova, Senior Lecturer, Department of Metals Science and Heat Treatment of Metals named after V. S. Biront, Head of Laboratory, Candidate of Technical Sciences, e-mail: olga_yushkova_1954@mail.ru
A. S. Yasinskiy, Associate Professor, Department of Non-Ferrous Metallurgy, Candidate of Technical Sciences
P. V. Polyakov, Professor, Department of Non-Ferrous Metallurgy, Doctor of Chemical Sciences


“United Center for Research and Development” LLC, Moscow, Russia:

V. V. Yushkov, Head of Procurement Department


The material consisting of alumina and frozen bath is used nowadays to cover the anodes. It is known that the cover material:
– protects the anode against the oxidation by air and carbon dioxide;
– contributes to the thermal insulation of the top of the cell;
– traps volatile fluorides (HF, NaAlF4 and AlF3).
The effect of mechanical activation of alumina being a part of cover material on its physical-mechanical properties is studied. Mechanical activation is known to increase the internal and surface energy of the alumina particles by performing the dissipation work. It is accompanied by the structure defects (dislocation and vacancies) appearance. Cover material with the G-00k (smelter grade) alumina of the Achinsk Refinery and the Nikolaevsk Refinery before and after the dry scrubbers and the frozen bath in a ratio (1:1) was used in this work. Alumina was activated in periodic (M-3 and R-400) and continuous (AGO-9) mills. Physicomechanical properties (namely angle of repose, dusting index, particle size distribution, bulk density, funnel flow time) were determined for alumina and the cover material. The angle of repose increases from 30 up to 45–47 degrees after mechanical activation. It is proposed to use the cover material, which includes secondary alumina after mechanical activation and frozen bath in the ratio (1:1). It is shown that the mechanical activation of alumina:
– increases the angle of repose, which contributes to the reduction of a heat loss and the anode oxidation rate;
– decreases the material dusting index due to the aggregation of particles, which contributes to the exclusion or reduces dusting, bulk density and heat losses by decreasing the cover material thermal conductivity.

The alumina mechanical activation is proved to be a promising solution.

Ключевые слова Alumina, cover material, mechanical activation, angle of repose, dusting index, electrolyte, aggregation, alumina-electrolyte mixture
Библиографический список

1. Xian Chun Shen, Margaret Hyland, Barry Welch. Top heat loss in HALLHEROULT cells. Light Metals. 2008. pp. 501–504.
2. Shakhray S. G., Polyakov P. V., Arkhipov G. V., Shaydulin E. R., Sman A. V. Anode cover as a subsystem of an aluminium reduction cell. Metallurg. 2014. No. 12. pp. 84–90.
3. Bazhin V. Yu., Vlasov A. A., Sman A. V., Molin M. V. Cover material for aluminium reduction cells. Engineering sciences: Theory and practice. Proceedings of the 2nd International Science Conference. Chita, 2014. pp. 33, 34.
4. Wilkening S. et al. Anode cover material and bath level control. Light Metals. 2005. pp. 367–372.
5. Gusberti V., Severo D. S., Welch B. J., Skyllas-Kazacos M. Modeling the mass and energy balance of different aluminium smelting cell technologies. Light Metals. 2012. pp. 929–934.
6. Liu X. L., Taylor M. P., George S. F. Crust Formation and Deterioration in Industrial Cells. Light Metals. 1992. pp. 489–494.
7. Baymakov Yu. V., Vetyukov M. M. Electrolysis of fused salts. Moscow : Metallurgiya, 1966. 560 p.
8. Hyland M., Taylor M. Origins and Effects of Potroom Dust. Light Metals. 2005. pp. 141–145.
9. Mintsis M. Ya., Polyakov P. V., Sirazutdinov G. A. Electrometallurgy of aluminium. Novosibirsk : Nauka, 2001. 368 p.
10. Ankudinov A. S. A guide for anode operator and fused salt electrolysis cell operator. Krasnoyarsk, 2008. 312 p.
11. Isaeva L. A., Polyakov P. V. Alumina in the electrolytic production of aluminium. Krasnoturyinsk : BAZ, 2000. 199 p.
12. Taylor M. P., Johnson G. L., Andrews E. W., Welch B. J. The Impact of anode cover control and anode assembly design on reduction cell performance. Light Metals. 2004. pp. 199–206.
13. Andrews E. W., Taylor M. P., Johnson G. L., Coad I. The Impact of anode cover control and anode assembly design on reduction cell performance – Part 2. Light Metals. 2005. pp. 357–363.
14. Wilkinson W. L. Non-Newtonian fluids. Translated from English. Moscow : MIR, 1964. 216 p.
15. Lindsаy S. Anode cover. TMS 2014 Industrial Aluminum Electrolysis Course : The Definitive Course on Theory and Practice of Primary Aluminum Production. 16–20 November 2014, Dubai, UAE. 2014.
16. Gakova O. A. Rheology of raw materials, semi-finished products and subproducts of breads, pasties and pastas : Study guides. Moscow : MGUTU, 2012. 171 p.
17. Roginskiy G. A. Batching of bulk materials. Moscow : Khimiya, 1978. 176 p.
18. Zimon A. D. Autohesion of dust and powders. Moscow : Khimiya, 1976. 432 p.
19. Zimon A. D., Andrianov E. I. Autohesion of bulk materials. Moscow : Metallurgiya, 1978. 288 p.
20. Hsien H. P. Measurement of flowability and dustiness of alumina. Light metals. 1986. pp. 139–149.
21. Grjotheim K., Krohn C., Malinovsky M., Matiassovsky K., Thonstad J. Aluminium electrolysis, fundamentals of the hall-heroult process. 2nd Ed. Aluminium Verlag, Düsseldorf, 1982. 443 p.
22. Ketil Rye, Ellen Myrvold, Ingar Solberg. The Effect of implementing slotted anodes on some operational parameters of a Pb-Line. Light Metals. 2007. pp. 293–298.
23. Yushkova O. V., Kulebakin V. G. Mechanochemical activation as a process that helps boost the reactivity of alumina and suppress dust. Journal of Siberian Federal University. Engineering & Technologies. 2011. Iss. 6. pp. 75–76.
24. Kumar R., Alex T. C. Elucidation of the nature of structural heterogeneity during alkali leaching of non-activated and mechanically activated boehmite (γ-AlOOH). Metallurgical and Materials Transactions B. 2015. Vol. 46, Iss. 4. pp. 1684–1701.
25. Alex T. C., Kumar R., Roy S. K., Mehrotra S. P. Mechanically induced reactivity of gibbsite: Part 1. Planetary milling. Powder Technology. 2014. Vol. 264. pp. 105–113.
26. Alex T. C., Kumar R., Roy S. K., Mehrotra S. P. Mechanically induced reactivity of gibbsite: Part 2. Attrition milling. Powder Technology. 2014. Vol. 264. pp. 229–235.
27. Alex T. C. An insight into the changes in the thermal analysis curves of boehmite with mechanical activation. Journal of Thermal Analysis and Calorimetry. 2014. Vol. 117, Iss. 1. pp. 163–171.
28. Alex T. C., Kumar R., Roy S. K., Mehrotra S. P. Towards ambient pressure leaching of boehmite through mechanical activation. Hydrometallurgy. 2014. Vol. 144–145. pp. 99–106.
29. Long W., Tirg'an Z., Guozhi L., Aichun Z., Sida M. et al. Characterization of activated alumina production via spray pyrolysis. Light Metals. 2017. pp. 93–99.
30. Yushkova O. V. Intensification of alumina dissolution in molten cryolite with the help of prior mechanical activation: PhD dissertation. Krasnoyarsk, 2012. 202 p.
31. Polyakov P., Yasinskiy A., Polyakov A., Zavadyak A., Mikhalev Y. et al. Anode Overvoltages on the Industrial Carbon Blocks. Light Metals. 2019. pp. 811–816.
32. Zavadyak A., Polyakov P., Yasinskiy A., Puzanov I., Mikhalev Y. et al. Transfer Processes in the Bath of High Amperage Aluminium Reduction Cell. Light Metals. 2019. pp. 773–777.
33. Polyakov P. V., Klyuchantsev A. B., Yasinskiy A. S., Popov Y. N. Conception of “Dream Cell” in aluminium electrolysis. Light Metals. 2016. pp. 283–288.
34. Yasinskiy A. S., Polyakov P. V., Voyshel Y. V., Gilmanshina T. R., Padamata S. K. Sedimentation behavior of high-temperature concentrated colloidal suspension based on potassium cryolite. Journal of Dispersion Science and Technology. 2018. Vol. 39, Iss. 10. pp. 1492–1501.
35. GOST 27802–93. Alumina. Method for the determination of repose angle. Introduced: 01.01.1995.
36. GOST 25469–93. Alumina. Sieve method for the determination of particle size distribution. Introduced: 01.01.1995.
37. STP 26.260.484–2004. Heat treatment of corrosion resistant iron-nickel steels and alloys in chemical engineering. Introduced: 01.07.2004.

Language of full-text русский
Полный текст статьи Получить