Journals →  Tsvetnye Metally →  2020 →  #2 →  Back

LIGHT METALS, CARBON MATERIALS
ArticleName Electrolytic production of aluminium. Review. Part 1. Conventional areas of development
DOI 10.17580/tsm.2020.02.04
ArticleAuthor Gorlanov E. S., Brichkin V. N., Polyakov А. А.
ArticleAuthorData

EKSPERT-AL LLC, Saint Petersburg, Russia:

E. S. Gorlanov, Deputy General Director, Candidate of Engineering Sciences, e-mail: gorlanove@yandex.ru

 

Saint Petersburg Mining University, Saint Petersburg, Russia:
V. N. Brichkin, Head of the Metallurgy Department, Doctor of Technical Sciences, e-mail: kafmet@spmi.ru
А. А. Polyakov, Postgraduate Student, e-mail: kafmet@spmi.ru

Abstract

This paper provides a review of the main areas of development in the conventional production of primary aluminium, analyses the many years of attempted commissioning of new-generation aluminium cells equipped with inert electrodes and considers some innovative approaches to improving the Hall – Heroult process. This part of the review demonstrates that starting from 1990s and till the present day the development of aluminium cells has been related to an increasing unit power. Another trend that has been observed is a rising current efficiency and a decreasing power consumption, which is the result of consistent efforts to optimize the cell design and the process and is due to the application of innovative materials and automatic control systems. At the same time, there have been significant changes in terms of electrolyte composition and temperature and the superheat versus the melting point. Alumina and fluoride point feeders, dry gas purification systems and effective cell covers have been introduced. Busbar have been improved to mitigate the effect of magnetic fields and maintain the stability of liquid aluminium cathode. These improvements helped boost the cell performance with the current efficiency risen to 96% and the specific power consumption dropped to 12.0–12.5 kW·h/kg Al. Further decrease in the power consumed by conventional design cells would require the use of a wettable (drained) cathode and a special technology to help dissipate heat from the outside of the cathode shell.

keywords Super-power cells, areas of development, indicators, design and technology, specific power consumption, current efficiency, inert electrodes
References

1. Reference book on the best available technology ITS 11-2016 “Aluminium production” (introduced by the Order no. 803 dated 29 June 2016 of the Federal Agency for Technical Regulation and Metrology). Moscow : Buro NDT, 2016. 146 p.
2. Smirnov A. N., Safonov V. M., Dorokhova L. V., Tsuprun A. Yu. Steel minimills: Monograph. Donetsk : Izdatelstvo Nord-Press, 2005. 469 p.
3. Haupin W., Frank W. Current and energy efficiency of Hall – Heroult cells — past, present and future. Light Metal Age. 2002. Vol. 60. pp. 6–13.
4. Choate W. T., Green J. A. S. US Energy Requirements for Aluminum Production: Historical Perspective, Theoretical Limits and New Opportunities. Special Review for U.S. Department of Energy. 2003. 117 p.
5. Vanvoren С. P., Homsi P., Feve B., Molinier B. et al. AP35: The Latest High Performance Industrially Available New Cell Technology. Light Metals. 2001. pp. 207–212.
6. Vanvoren С. P., Homsi P., Basquin J. L. et al. AP 50: The Pechiney 500 kA Cell. Light Metals. 2001. pp. 221–226.
7. Charmier F., Martin O., Gariepy R. Development of the AP Technology Through Time. JOM. 2015. Vol. 67, Iss. 2. pp. 336–341.
8. Dupuis M. Thermo-Electric Design of a 740 kA Cell, Is There a Size Limit? ALUMINIUM. 2005. Vol. 81, No. 4. pp. 324–327.
9. Mann V., Buzunov V., Pitertsev N., Chesnyak V. et al. Reduction in Power Consuption at UC RUSAL's Smelter 2012–2014. Light Metals. 2015. pp. 757–762.
10. Radionov E. Yu., Nemchinova N. V., Tretiakov Ya. A. Modelling of magnetohydrodynamic processes taking place in electrolytic cells during primary aluminium production. Vestnik Irkutskogo gosudarstvennogo tekhnicheskogo universiteta. 2015. No. 7(102). pp. 112–120.
11. Pingin V. V., Tretyakov Ya. A., Radionov E. Yu., Nemchinova N. V. Modernization prospects for the bus arrangement of electrolyzer S-8BM (S-8B) (С-8БМ (С-8Б)). Tsvetnye Metally. 2016. No. 3. pp. 35–41. DOI: 10.17580/tsm.2016.03.06.
12. Mann V., Zavadyak A., Puzanov I., Platonov V., Pingin V. RA-550 Cell Technology: UC RUSAL’s New Stage of Technology Development. Light Metals. 2018. pp. 715–719.
13. Zavadyak A., Puzanov I., Gibert E., Platonov V. Enhancement of the RA-550 Technology: Issues and Their Solutions. TRAVAUX 48, Proceedings of the 37th International ICSOBA Conference and XXV Conference “Aluminium of Siberia”, Krasnoyarsk, Russia, 16–20 September 2019. p. 829.
14. Liang Xuemin. The Engineering Design Optimization and Investment Analysis of China’s Electrolytic Aluminum. Proceedings of International Congress of ICSOBA. Presentation. 2010. pp. 135–144.
15. Dingxiong Lu.,Yungang Ban, Junman Qin, Zijin Ai. New progress on application of NEUI400kA family high energy efficiency aluminum reduction pot (HEEP) technology. Light Metals. 2011. pp. 443–448.
16. The first line of the China – Russia electrolytic aluminium project put into operation in Southwest China. Available at: https://news.rambler.ru/other/43261057-pervaya-ochered-kitaysko-rossiyskogo-proekta-po-proizvodstvuelektroliticheskogo-alyuminiya-vvedena-v-ekspluatatsiyu-v-yugo-zapadnomkitae/.
17. Tabereaux A. Super-High Amperage Prebake Cell Technologies in Operation at Worldwide Aluminum Smelters. Light Metal Age. 2017. Vol. 75. pp. 26–29.
18. Zhou D., Yang X., Liu M., Liu W. Chinalco 600KA Hight Capacity Low Energy Consuption Reduction Cell Development. Light Metals. 2015. pp. 484–487.
19. Forte M. et al. Arvida Aluminum Smelter – AP60 Technological Center, Start-Up Performance. Light Metals. 2015. pp. 495–498.
20. Yves C., Mantha I., Bardet B., Becasse S., Blais A., Forle M., Guerard S. Modelling and measurements to support technological development of AP60 and APXe cells. ICSOBA 2016, Quebec, Canada. 2016.
21. Bardel A. et al. HAL4e – Hydro’s New Generation Cell Technology. Light Metals. 2009. pp. 371–376.
22. Segatz M. et al. Hydro`s Cell Technology Path Towards Specific Energy Consumption Below 12 KWH/Kg. Light Metals. 2016. pp. 301–305.
23. Lange H. P., Holt N. J., Linga H., Solli L. N. Innovative solutions to sustainability in hydro. Light Metals. 2008. pp. 211–216.
24. Dai Yingfei et al. Performance of SY400 prebake cells. Science and Technology Information. 2015. Iss. 2. pp. 101–102.
25. Dingxiong Lu.,Yungang Ban, Junman Qin, Zijin Ai. New progress on application of NEUI400kA family high energy efficiency aluminum reduction pot (HEEP) technology. Light Metals. 2011. pp. 443–448.
26. Liu Zhenqian, Cao Yabing Wang Xiaokang. Commentary on technical status of 500 kA prebaked aluminum cell. The Chinese Journal of Nonferrous Metals (smelting section). 2015. Iss. 6. pp. 42–46.
27. Liu W., Zhou D., Liu Y., Liu M. et al. Simulation and Measurements on the Flow Field of 600KA Aluminum Reduction Pot. Light Metals. 2015. pp. 479–482.
28. Dupuis M. Second Attempt to Break 10 kWh/kg Energy Consumption Barrier Using a Wide Cell Design. TRAVAUX 48, Proceedings of the 37th International ICSOBA Conference and XXV Conference “Aluminium of Siberia”, Krasnoyarsk, Russia, 16 – 20 September 2019. pp. 849–859.
29. Solli P. A., Eggen T., Skybakmoen E., Sterten A. Current Efficiency in the Hall-Heroult Process for Aluminum Electrolysis, Experimental and Modelling Studies. Journal of Applied Electrochemistry. 1997. Vol. 27. pp. 939–946.

Language of full-text russian
Full content Buy
Back