Журналы →  Non-ferrous Metals →  2020 →  №1 →  Назад

HEAVY NON-FERROUS METALS
Название Processing of fuel oil ash from thermal power plant with extraction of vanadium and nickel
DOI 10.17580/nfm.2020.01.01
Автор Goncharov K. V., Kashekov D. Yu., Sadykhov G. B., Olyunina T. V.
Информация об авторе

A. A. Baikov Institute of Metallurgy and Materials Science (Russian Academy of Sciences), Moscow, Russia:

K. V. Goncharov, Senior Researcher, e-mail: goncharov-imet@mail.ru
D. Yu. Kashekov, Research Assistant, Postgraduate, e-mail: deniskashekov@mail.ru
G. B. Sadykhov, Head of Laboratory, Chief Researcher, e-mail: guseyn.sadykhov@gmail.com
T. V. Olyunina, Senior Researcher, e-mail: toliun@yandex.ru

Реферат

The article presents results of research on extraction of vanadium and nickel from fuel oil ash. The studied ash contains a significant amount of valuable components (7.82% of V2O5 and 0.74% of NiO), which makes it a promising raw material for processing. We researched the influence of oxidizing roasting and its duration, the type of charge mixing and the amount of sodium carbonate addition on the level of extraction of vanadium and nickel through consecutive water and sulphuric acid leaching. The article also presents the chemical processes that occur during oxidizing roasting of ash with different amounts of sodium carbonate additions and their influence on the results of extraction of vanadium and nickel. We established that vanadium is generally extracted at the water leaching stage, whilst nickel is extracted only at the sulphuric acid leaching stage this allows for a selective separation of vanadium from nickel. The extraction level of nickel can reach 56.7%, yet it may decrease considerably due to the formation of insoluble nickel ferrite through maximum extraction of vanadium. In the article we offer a schematic diagram of ash processing, where ash is introduced at the wet briquetting stage with addition of 50% of soda. After drying, the obtained briquettes go through 60 minutes of oxidizing roasting at the temperature of 500 оC. We then leach the roasted product in water at the temperature of 80 oC for 60 minutes. During this process nearly 82.0% of V2O5 goes into the solution, whilst almost all of nickel remains in the solid residue. After that, we extract vanadium from the vanadate solution by sedimentation of ammonium vanadates to obtain a marketable high-purity vanadium pentoxide. Afterwards, we leach the solid residue with a 3% sulphuric acid for 60 minutes to extract nickel. The solid residue, whose mass equals 42.4% of the mass of the initial ash, contains 56.9% of Fe2O3, 2.1% of V2O5, 1.4% of NiO etc. It poses no harm to the environment and may be further processed as iron-ore or titanomagnetite raw materials at the existing enterprises with extraction of iron, vanadium and, perhaps, nickel.

Our research was carried out with the support of a program of Presidium of RAS (Filing number of Research, Development and Technological Work: АААА-А18-118032690052-5).

Ключевые слова Vanadium, nickel, ash, utilization, processing, fuel oil, leaching, roasting, extraction
Библиографический список

1. Lur'e M. A. Metal Content of Oils, a Genetic Aspect. Otechestvennaya Geologiya. 2017. No. 4. pp. 109–114.
2. Annual Report of Murmansk Thermal Power Plant for 2019. Available at: https://www.murmantec.com/storage/app/media/reports/GBO_AZ%20%20za%202019.pdf (accessed: 30.04.2020).
3. Pastrana-Corral M. A., Wakida F. T.,Temores-Peña J., Rodriguez-Mendivil D. D., García-Flores E., Piñon-Colin T. D. J., Quiñonez-Plaza A. Heavy Metal Pollution in the Soil Surrounding a Thermal Power Plant in Playas de Rosarito, Mexico. Enviromental Earth Sciences. 2017. Vol. 76, Iss. 16. DOI: 10.1007/s12665-017-6928-7
4. Zubcova E. I., Protasov A. A., Biletski L. I., Zubcova N. N., Ungureanu L. N., Tihonenkova L. N., Philipenko E. N., Silaeva A. A. Migration of Vanadium in the Ecosystem of Kuchurgan Cooling Reservoir of the Moldovan Thermal Power Plant. Journal of Siberian Federal University. Biology. 2017. Vol. 10, Iss. 4. pp. 446–458.
5. Issa M. J., Hussain H. M., Shaker I. H. Assessment of the Toxic Elements Resulting from the Manufacture of bricks on Air and Soil at Abu Smeache Area – Southwest Babylon Governorate – Iraq. Iraqi Journal of Science. 2019. Vol. 60, Iss. 11. pp. 2443–2456.
6. Tsygankova M. V., Bukin V. I., Lysakova E. I., Smirnova A. G., Reznik A. M. Vanadium recovery from ash produced in oil burning at thermal power plants. Izvestiya Vuzov. Tsvetnaya Metallurgiya. 2011. No. 1. pp. 21–26.
7. Sirina T. P., Mizin V. G., Rabinovitch E. M., Slobodin B. V., Krasnenko T. I. Recovery of Vanadium and Nickel from Waste of Thermal Power Plants. Ekaterinburg: Rossiyskaya Akademiya Nauk. Uralskoe Otdelenie, 2001. 234 p.
8. Rahimi G., Rastegar S. O., Rahmani Chianeh F., Gu T. Ultrasound-Assisted Leaching of Vanadium from Fly Ash Using Lemon Juice Organic Acids. RSC Advances. 2020. Vol. 10, Iss. 3. pp. 1685–1696.
9. Ponomarev A. I. Methods of Chemical Analysis of Iron, Titanium-Magnesium and Chromium Ores. Moscow : Nauka, 1966. 406 p.
10. Facility for the Analysis of Chemical Thermodynamics (FACT). Available at: http://www.crct.polymtl.ca/fact/ (accessed: 30.04.2020).
11. Mizin V. G., Rabinovitch E. M., Sirina T. P., Drobosh V. G., Rabinovitch M. E., Krasnenko T. I. Complex Processing of Vanadium Raw Materials: Chemistry and Technology. Ekaterinburg: Rossiyskaya Akademiya Nauk. Uralskoe Otdelenie, 2005. 415 p.
12. Sadykhov G. B., Zablotskaya Yu. V., Anisonyan K. G., Khasanov M. Sh., Olyunina T. V., Goncharov K. V., Kopev D. Yu. Development of a New Combined Process for Nickel and Cobalt Recovery from Ferriferous Laterite Ores. Metally. 2019. No. 2. pp. 3–10.
13. Zablotskaya Yu. V., Sadykhov G. B., Khasanov M. Sh., Smirnova V. B. Kinetics of Sulphuric Acid Leaching of Nickel from Reduced Limonite Ore of the Buruktal Deposit. Tsvetnye Metally. 2018. No. 12. pp. 27–31. DOI: 10.17580/tsm.2018.12.04
14. Goncharov K. V., Anisonyan K. G., Kopjov D. Yu., Sadykhov G. B. Investigation of The Process of Purification of Sulfuric Acid Vanadate Solutions from Manganese and Other Impurities. Tsvetnye Metally. 2017. No. 2. pp. 62–67. DOI: 10.17580/tsm.2017.02.10
15. Goncharov G. V., Kashekov D. Yu., Atmadzhidi A. S., Olyunina T. V., Sadykhov G. B. Obtaining of Pure Vanadium Pentoxide During the Processing of Slimes of Vanadium Production. International Scientific Conference “Physical and Chemical Bases of Metallurgical Processes” (Moscow, November 25–28, 2019). Collection of Reports. Moscow : IMET RAN, 2019. p. 118.
16. Reznik I. D., Ermakov G. P., Shneerson Ya. M. Nickel. Vol. 2. Moscow : Nauka i Tekhnologii, 2004. 468 p.

Полный текст статьи Processing of fuel oil ash from thermal power plant with extraction of vanadium and nickel
Назад