Journals →  Eurasian Mining →  2020 →  #2 →  Back

AUTOMATION
ArticleName The concept of digital twins for tech operator training simulator design for mining and processing industry
DOI 10.17580/em.2020.02.12
ArticleAuthor Beloglazov I. I., Petrov P. A., Bazhin V. Yu.
ArticleAuthorData

Saint-Petersburg Mining University, Saint-Petersburg, Russia:

Beloglazov I. I., Associate Professor of Department for Automation of Production Process Flows, Candidate of Engineering Sciences, beloglazov@spmi.ru
Petrov P. A., Dean of Mineral Processing Faculty, Candidate of Engineering Sciences
Bazhin V. Yu., Head of Department for Automation of Production Process Flows, Doctor of Engineering Sciences, Associate Professor

Abstract

According to the top-priority trends and challenges in the mineral sector, and as per the mining science strategy, it is highly critical to arrange enhanced control, prediction and safety of production objects and their functioning for the preservation of automation sustainability. Improved control of databases, regulatory bonds, management, logistics and principles of sustainable development in mining makes it possible to reduce technological deviations and accidents at large mining and processing plants. Most procedural violations and accidents in surface and underground mines occur because of the unskilled actions of process flow operators. Damage in this case can be considerable, especially as compared with the expenses connected with qualitative training and persistent development of personnel engaged with supervisory control and data acquisition for the efficient operation of SCADA-systems within the automation framework of mining and processing plants. Definition of digital systems and their interrelation with multilevel automated control can be incorrect. The review of new principles can awaken interest in the conceptual assessment of digitalization processes using such notions as: numerical models, simulator, and artificial intelligence. Often applied formulations and principles of a digital model are substituted without justification of functional connections. On the other hand, a digital system today can be assumed as robotic lines and other numerical models and smart technologies, for instance, machining stations with numerical program control. It is necessary to define the practical significance of conceptual modifications and digital transformation regarding objects of the mineral sector, using Big Data; to understand how a digital twin can influence a changeable process situation; to provide prompt prediction; to eliminate an accident; and to preserve the physical balance in the whole production system. Such intelligent and flexible productions particularly need computerbased simulators and digital twins based on technologies of Industry 4.0–extended and virtual reality on the basis of digital twins. Digital twins allow maximal simulation of real-life activity of process flow operators. The skills acquired by personnel after such simulation training enable operators to master the optimized procedure for functioning in emergency situations in mineral mining and processing. This paper exemplifies the remote training and control of process flows, which is of concern in the current international situation.

keywords Mining and processing industry, digital twin, simulator, transformation, intelligent system, SCADA-system, production safety, training, extended reality, dynamic modeling
References

1. Availabe at: http://static.government.ru/media/files/WXRSEBj6jnRWNrumRkDakLcqfAzY14VE.pdf (accessed: 27.03.2020)
2. Available at: http://www.garant.ru/products/ipo/prime/doc/70484380/#ixzz4aP1zXHhy (accessed: 27.03.2020)
3. Available at: https://spmi.ru/sites/default/files/imci_images/univer/bloks/napr_iiul_2019_s.pdf (accessed: 27.03. 2020)
4. Litvinenko V. S. Digital Economy as a Factor in the Technological Development of the Mineral Sector. Natural Resources Research. 2019. Vol. 28, Iss. 28. pp. 1–21.
5. Litvinenko V. S.The Role of Hydrocarbons in the Global Energy Agenda: The Focus on Liquefied Natural Gas. Resources. 2020. Vol. 9, Iss. 59. DOI: 10.3390/resources9050059
6. Berman S. Digital transformation: Opportunities to create new business models. Strategy & Leadership. 2012. Vol. 40, Iss. 2. pp. 16–24.
7. Gukovskiy Y. L., Sychev Y. A. and Pelenev D. N. The automatic correction of selective action of relay protection system against single phase earth faults in electrical networks of mining enterprises. International Journal of Applied Engineering Research. Research India Publications. 2017. Vol. 12, Iss. 5. pp. 833–838.
8. Rylov S. A., Sofiev A. E., Tarakanov Yu. V. Mobile computerbased simulator for training process flow operators. Pribory. 2010. No. 3. pp. 19–24.
9. Dozortsev V., Nazin V., Oboznov A., Mironova A. Structural knowledge as an evaluation instrument of trainess progress in learning. 11th IEEE International Conference on Application of Information and Communication Technologies. 2017. Vol. 2. pp. 275–279.
10. Alvarez A., Fernandez E., Prokofeva E. N., Vostrikov A. V. The building of effective systems of training and development for mining engineers with the basis of digital technologies. Eurasian Mining. 2019. No. 1. pp. 49–52. DOI: 10.17580/em.2019.01.12
11. Gurskaya T. V., Krasavin A. V., Fedorova S. V., Khudyakov P. Y. Practice-oriented approach to mining engineer training. Gornyi Zhurnal. 2018. No. 2. pp. 97–103. DOI: 10.17580/gzh.2018.02.14
12. Dozortsev V. M., Kreidlin E. Y. State-of-the-art automated process simulation systems. Automation and Remote Control. 2010. Vol. 71, Iss. 9. pp. 1955–1963.
13. Dozortsev V. M. New Сhallenges to industrial safety — Will computer simulators help? Bezopasnost’ Truda v Promyshlennosti. 2019. No. 9. pp. 31–38.
14. Corbetta M., Grossmann I. E., Manenti F. Process simulatorbased optimization of biorefinery downstream processes under the Generalized Disjunctive Programming framework. Computers & Chemical Engineering. 2016. Vol. 88. pp. 73–85.
15. Alekseenko V. A., Pashkevich M. A., Alekseenko A. V. Metallisation and environmental management of mining site soils. Journal of Geochemical Exploration. 2017. Vol. 174. pp. 121–127.
16. Pashkevich M. A., Petrova T. A. Development of an operational environmental monitoring system for hazardous industrial facilities of Gazprom Dobycha Urengoy. Journal of Physics: Conference Series. 2019. Vol. 1384. pp. 1–7.
17. Koptev V. Y., Kopteva A. V., Improving paraffin deposits detection methodology for better ecological safety during hydrocarbon transportation. International Journal of Applied Engineering Research. 2017. Vol. 12(5). pp. 618–621
18. Katuntsov E. V., Kultan Y., Makhovikov A. B. Application of electronic learning tools for training of specialists in the field of information technologies for enterprises of mineral resources sector. Journal of Mining Institute. 2017. Vol. 226. pp. 503–508. DOI: 10.25515/PMI.2017.4.503
19. Dozortsev V. M. Computer-based simulators for training process flow operators. Moscow : SINTEG, 2009. pp. 29–31, 42–44.
20. Sganzerla C., Seixas C., Conti A. Disruptive Innovation in Digital Mining. Procedia Engineering. 2016. Vol. 138. pp. 64–71.
21. Rylov S. A., Sofiev A. E. Applicaton of Virtual Machine Technology in engineering of computer-based simulators for training of process flow operators. Pribory. 2020. No. 5. pp. 22–25.
22. Skorych V., Dosta M., Hartge E.-U., Heinrich S. Novel system for dynamic flowsheet simulation of solids processes. Powder Technol. 2017. Vol. 314. pp. 665–679.
23. Vasilyeva N. V., Nikitina L. N. Using Modern Technologies in Research Complexes and Laboratories of Saint-Petersburg Mining University for Improving the Preparation Efficiency of Specialists in the Mining Industry. IOP Conference Series: Materials Science and Engineering. 2020. Vol. 753. DOI: 10.1088/1757-899X/753/6/062031
24. Monov V., Sokolov B., Stoenchev S. Grinding in ball mills: Modeling and process control. Cybernetics and Information Technologies. 2012. Vol. 12, Iss. 2. pp. 51–68.
25. Cleary P. W., Owen P. Effect of operating condition changes on the collisional environment in a SAG mill. Minerals Engineering. 2018. DOI: 10.1016/j.mineng.2018.06.027.
26. Kiangi K., Potapov A., Moys M. DEM validation of media shape effects on the load behaviour and power in a dry pilot mill. Minerals Engineering. 2013. DOI: 10.1016/j.mineng.2013.03.025.
27. Cleary P. W., Owen P. Effect of particle shape on structure of the charge and nature of energy utilisation in a SAG mill. Minerals Engineering. 2019. Vol. 132. pp. 48–68.
28. Beloglazov I. I., Stepanyan A. S., Feoktistov A. Yu., Yusupov G. A. Disintegration process modeling for a jaw crusher with complex jaws swing. Obogashchenie Rud. 2018. No. 2. pp. 3–8. DOI: 10.17580/or.2018.02.01.
29. Savchenkov S. A., Nikitina L. N., Bazhin V. Y. Experience of mining specialists training at the chair of process and production automation of the mining university. Eurasian Mining. 2017. No. 1. pp. 42–44. DOI: 10.17580/em.2017.01.11
30. Voronina M. V., Tretyakova Z. O., Krivonozhkina E. G., Buslaev S. I., Sidorenko G. G. Augmented Reality in Teaching Descriptive Geometry, Engineering and Computer Graphics – Systematic Review and Results of the Russian Teachers’ Experience. Eurasia Journal of Mathematics, Science and Technology Education. 2019. Vol. 15, Iss 12. DOI: 10.29333/ejmste/113503
31. Dong P., Shi L. Emergency pressure relief simulation of diesel hydrogenation unit. Petroleum Refinery Engineering. 2019. Vol. 49, Iss. 11. pp. 55–59.
32. Available at: https://download.schneider-electric.com/files?p_enDocType=Customer+success+story&p_File_Name=SuccessStory_SE-LIO-SimSci_Intermountain-Power_11-16.pdf&p_Doc_Ref=Intermountain_Power (accessed: 27.03. 2020).
33. Dave D., Arnold W., Timothy S., Reed M. Dynamic simulation studies for boiler draft. Applied Thermal Engineering. 2017. Vol. 121. pp. 255–293.
34. Gani R., Soerensen E. L., Perregaard J. Design and analysis of chemical processes through DYNSIM. Industrial & Engineering Chemistry Research. 1992. Vol. 31, Iss.1. pp. 244–254.
35. Corbetta M., Grossmann I. E., Manenti F. Process simulatorbased optimization of biorefinery downstream processes under the Generalized Disjunctive Programming framework. Computers & Chemical Engineering. 2016. Vol. 88. pp. 73–85.
36. Potapov A. I., Kulchitskii A. A., S morodinskii Ya. G., Smirnov A. G. Evaluating the Error of a System for Monitoring the Geometry of Anode Posts in Electrolytic Cells with Self-Baking Anode. Russian Journal Nondestructing Testing. 2020. Vol. 56. pp. 268–274.
37. Slastenov I., Tasanbaev S., Dozortsev V. First principles simulation model identification based on real industrial process data. 21st European Concurrent Engineering Conference. 2015. pp.11–14.
38. Marcano L., Haugen F. A., Sannerud R., Komulainen T. Review of simulator training practices for industrial operators: How can individual simulator training be enabled? Safety Science. 2019. Vol. 115. pp. 414–424.
39. Patle D. S., Manca D., Nazir S., Sharma S. Operator training simulators in virtual reality environment for process operators: a review. Virtual Reality. 2018. DOI: 10.1007/s10055-018-0354-3
40. Kluge A. The acquisition of knowledge and skills for taskwork and teamwork to control complex technical systems: A cognitive and macroergonomics perspective. Springer, 2014. 196 p.
41. Overchenko M. N., Marinin M. A., Mozer S. P. Quality Improvement of Mining SpecialistsTraining on the Basis of Cooperation Between Saint-Petersburg Mining University and Orica Company. Journal of Mining Institute. 2017. Vol. 228. pp. 681–687.
42. Litvinenko V. S., Tsvetkov P. S., Dvoynikov M. V., Buslaev G. V., Eichlseder W. Barriers to implementation of hydrogen initiatives in the context of global energy sustainable development. Journal of Mining Institute. 2020. Vol. 244. pp. 428–438. DOI: 10.31897/PMI.2020.4.5
43. Boikov A. V., Savelev R. V., Payor V. A., Erokhina O. O. The control method concept of the bulk material behavior in the pelletizing drum for improving the results of DEM-modeling. CIS Iron and Steel Review. 2019. Vol. 17. DOI: 10.17580/cisisr.2019.01.02
44. Golubev V. O., Chistiakov D. G., Brichkin V. N., Litvinova T. E. Systems and aids of mathematical modeling of the alumina refinery methods: Problems and solutions. Non-ferrous Metals. 2019. No. 1. pp. 40–47. DOI: 10.17580/nfm.2019.01.07
45. Beregovoi D. V., Younes J. A., Mustafin M. G. Monitoring of Quarry Slope Deformations with the Use of Satellite Positioning Technology and Unmanned Aerial Vehicles. Procedia Engineering. 2017. Vol. 189. pp. 737–743.

Full content The concept of digital twins for tech operator training simulator design for mining and processing industry
Back