Journals →  Chernye Metally →  2021 →  #1 →  Back

60th anniversary of RosNITI JSC
ArticleName Study of the process of formation of tubes end sections during longitudinal rolling in grooves formed by a different number of rolls
DOI 10.17580/chm.2021.01.06
ArticleAuthor D. A. Akhmerov, A. V. Vydrin
ArticleAuthorData

Russian Scientific and FResearch Institute of Tube Industry – RusNITI JSC (Chelyabinsk, Russia):

D. A. Akhmerov, Engineer, Lab. Of Simulation of Technological Processes, E-mail: AhmerovDA@rosniti.ru
A. V. Vydrin, Dr. Eng., Prof., Deputy General Director for Scientific Research, E-mail: VydrinAV@rosniti.ru

Abstract

The work substantiates the relevance and highlights the degree of development of the research topic. The main advantages and disadvantages of the process of rolling hollow billets with the use of modern longitudinal rolling mills with 2 and 3 roll grooves are noted. With the help of physical and computer modeling, a study of the process of longitudinal rolling of pipes using 2 and 3 roll passes was carried out, for the formation of end sections (scrap). Established and numerically reflected the relationship between the size of the reduction of passes of a continuous rolling mill with 3-roll and 2-roll stands and the length of the end sections of the pipes. It is clear that the use of 3 rolls, forming a groove, allows to reduce the total end cut by 1.5 times, in contrast to 2 rolls. It has been determined that the main technological factors influencing the formation of the end sections are the ratio of the external diameter to the wall thickness of the strip (D/S), the reduction along the wall thickness, the elongation ratio, and the number of rolls required to form the groove. An empirical formula has been obtained for calculating the length of the end trim, which makes it possible to evaluate the influence of the number of rolls in the stand, the D/S ratio and the stretch ratio.

keywords Rolling technology, continuous rolling mill, 2- and 3-roll passes, trimming of the end sections of the roll, physical modeling, computer simulation, Qform
References

1. Kolikov А. P., Romantsev B. А., Aleshenko А. S. Metal forming: theory of tube production processes: textbook. Moscow: NITU MISiS, 2019. 502 p.
2. Wilms М. Seamless tubemaking at the new PQF mill. Chernye Metally. 2018. No. 11. pp. 67–69.
3. Vydrin А. V., Shirokov V. V. Study of deformation, kinematic and power parameters in the process of continuous rolling of seamless tubes. Chernye Metally. 2012. No. 2. pp. 14–19.
4. Vydrin А. V. Development of technologies of hot rolling of seamless tubes. Chernye Metally. 2012. No. 9. pp. 16–20.
5. Ru-Song J. I. N. Development of MPM Tube Rolling Technology [J]. Baosteel Technology. 2005. Vol. 6. pp. 10–14.
6. Zheng Zh., Yekui Yu. Development of process technology of retained mandrel MPM. Steel pipe. 1999. Vol. 28. No. 5. pp. 1–6.
7. Xiaofeng Z. Tube rolling technology analysis of MPM and PQF. Research on Iron & Steel. 2008. Vol. 36. No. 3. pp. 58–62.
8. Bunyashin М. V., Vydrin А. V., Barichko B. V., Kochkin А. S., Khramkov Е. V. Physical modeling of geometric and force parameters of the continuous longitudinal plugless rolling of tubes. Vestnik Yuzhno-Uralskogo gosudarstvennogo universiteta. Seriya: Metallurgiya. 2019. Vol. 19. No. 4. pp. 49–55.
9. Baines K. Lead as a model material to simulate mandrel rolling of hot steel tube. Journal of Materials Processing Technology. 2001. Vol. 118. No. 1–3. pp. 422–428.
10. Ning An, Liu Hai. Finite Element Analysis of Rolling Process for Pilger Mill. Advanced Materials Research. 2019. Vol. 881-883. pp. 1420–1423.
11. Xin Jiaxin, Yu Wei, Dong Entao. Technology and application of continuous hot rolling of seamless pipes made of titanium alloy. Journal of Chongqing University. 2019. Vol. 42. No. 6. pp. 42–48.
12. Toporov V. А. et. al. Numerical simulation of continuous rolling of tubes on the FQM mill in the deform-3D program. Vestnik Yuzhno-Uralskogo gosudarstvennogo universiteta. Seriya: Metallurgiya. 2020. Vol. 20. No. 1. pp. 27–33.

Language of full-text russian
Full content Buy
Back