Journals →  Tsvetnye Metally →  2021 →  #12 →  Back

COMPOSITES AND MULTIPURPOSE COATINGS
ArticleName Structure of VT6 – SiC composite material
DOI 10.17580/tsm.2021.12.06
ArticleAuthor Travyanov A. Ya., Petrovskiy P. V., Cheverikin V. V., Lagutin A. O.
ArticleAuthorData

National University of Science and Technology “MISiS”, Moscow, Russia:
A. Ya. Travyanov, Head of the College of Environmentally Sound Technologies and Engineering, Candidate of Technical Sciences, e-mail: trav@misis.ru
P. V. Petrovskiy, Deputy Director of the College of Environmentally Sound Technologies and Engineering, Candidate of Technical Sciences
V. V. Cheverikin, Leading Researcher, Department of Metallurgy of Non-ferrous metals, Candidate of Technical Sciences
A. O. Lagutin, Engineer, Laboratory of Hybrid Additive Technologies

Abstract

To date, the methods of additive technologies for manufacturing goods are applying more and more widely in the real sector of production and are rapidly developing. The development of various composite materials by these methods is of increased interest, since it has become possible to obtain composite materials with a different number of initial components of the matrix and reinforcer. It became possible to integrate ceramics into a metal matrix and vice versa by growing products from raw powder materials variously composed. The resultant materials may be used as a replacement for existing ones, since they have a cumulative unique set of properties that are necessary for technological and scientific expansion. Combination of well-known technologies, such as classical hot isostatic pressing, selective laser melting and ceramic fiber reinforcement, will make it possible to obtain unique composite materials. Thin-walled products from titanium alloys, including thin sections, may be obtained by the use of selective laser melting. The main problems in manufacturing of fiber-reinforced materials are setting the fibers in a given position, minimizing their displacement during consolidation, as well as limiting the matrix and fiber interaction during consolidation to prevent a reaction with the formation of an interaction zone. In order to create a new material, a silicon carbide reinforcing fiber was loaded into the shaped manufactured article, followed by encapsulated hot isostatic pressing. As a result, effective diffusion connections of individual matrix elements took place, as well as complete enveloping the fibers with the matrix material. A low-porosity structure without large defects visible on X-ray tomography was obtained.
The work was carried out with the financial support of the Ministry of Science and Higher Education of the Russian Federation under the Grant agreement No. 075-11-2019-058 dated 25.11.2019 “Organization of production of locally reinforced parts made of titanium alloys operating under conditions of increased loads and temperatures for advanced aviation gas turbine engines”, approved by the Decree No. 218 of the Government of the Russian Federation.

keywords Key words: composite material, titanium alloy, SiC fiber, microstructure, addi tive technologies, selective laser melting, X-ray tomography.
References

1. Leyens C., Hausmann J., Kumpfert J. Continuous fiber reinforced titanium matrix composites: Fabrication, properties and applications. Advanced Engineering Materials. 2003. Vol. 5, No. 6. pp. 399–410.
2. Martin E., Carrère N. Metal matrix composites: continuous silicon-carbide fibers/titanium-alloy matrix. Wiley Encyclopedia of Composites. New York : John Wiley & Sons, 2012. DOI: 10.1002/9781118097298.weoc139.
3. Hayat M. D., Singh H., Cao P. et al. Titanium metal matrix composites: An overview. Composites Part A: Applied Science and Manufacturing. 2019. Vol. 121. pp. 418–438.
4. Wang Y., Zhang G., Zhang X. et al. Advances in SiC fiber reinforced titanium matrix composites. Acta Metallurgica Sinica. 2016. Vol. 52, No. 10. pp. 1153– 1170.
5. Sidorov D. V., Serpova V. M., Shavnev A. A. Manufacturing methods and fields of application of high-strength fibrous composite materials reinforced with silicon carbide core fiber. Vse materialy. Entsiklopedicheskiy spravochnik. 2018. No. 3. pp. 15–22.
6. MacKay R. A., Brindley P. K., Froes F. H. Continuous fiber-reinforced titanium aluminide composites. JOM. 1991. Vol. 43, No. 5. pp. 23–29.
7. Qu H. T., Ren X. P., Hou H. L. et al. Interfacial behaviors in SiC fiber reinforced titanium matrix composites during thermal exposure. Advanced Materials Research. 2011. Vol. 295–297. pp. 880–885.
8. Carrère N., Kruch S., Vassel A. et al. Damage mechanisms in unidirectional SiC/Ti composites under transverse creep loading: Experiments and modeling. International Journal of Damage Mechanics. 2002. Vol. 11, No. 1. pp. 41–63.
9. Larsen J. M., Russ S. M., Jones J. W. An Evaluation of Fiber-Reinforced Titanium Matrix Composites for Advanced High-Temperature Aerospace Applications. Metallurgical and Materials Transactions A. 1995. Vol. 26A. pp. 3211–3223.
10. Shiganov I. N., Ovchinnikov V. V., Kobernik N. V. Composite materials with a metal matrix: welded joints and coatings. Мoscow : KNORUS, 2021. 352 p.
11. Grishina O. I., Kochetov V. N., Shavnev А. А. et al. Aspects of application of high-strength and high-modulus fiber metal composite materials for aeronautical purpose (review). Trudy VIAM. 2014. No. 10. Article Number 5.
12. Wang M.-J., Huang H., Li H. et al. Microstructure and interfacial strength of SiC fiber-reinforced Ti17 alloy composites with different consolidation temperatures. Rare Metals. 2018. Vol. 37, No. 9. pp. 759–768.
13. Xu X.-H., Yang Y.-Q., Luo X. et al. Finite element modeling of consolidation process of SiC fiber-reinforced titanium matrix composites via matrixcoated fiber method. Rare Metals. 2015. Vol. 34, No. 12. pp. 844–850.
14. Muthuchamy A., Ram G. D. J., Sarma V. S. Spark plasma consolidation of continuous fiber reinforced titanium matrix composites. Materials Science and Engineering: A. 2017. Vol. 703. pp. 461–469.
15. Karakozov E. S., Orlova L. M., Peshkov V. V. Diffusion welding of titanium. Moscow : Metallurg, 1977. 272 p.
16. Izotova A. Yu., Grishina O. I., Shavnev A. A. Fiber-reinforced titanium based composites (review). Trudy VIAM. 2017. No. 5 (53). pp. 42–49.
17. Zhang W., Yang Y. Q., Zhao G. M. et al. Investigation of interfacial reaction in SiC fiber reinforced Ti – 43Al – 9V composites. Intermetallics. 2013. Vol. 33. pp. 54–59.
18. Yuan M., Yang Y., Huang B. et al. Evaluation of interface fracture toughness in SiC fiber reinforced titanium matrix composite. Transactions of Nonferrous Metals Society of China. 2008. Vol. 18, No. 4. pp. 925–929.
19. Even C., Arvieu C., Quenisset J. M. Powder route processing of carbon fibers reinforced titanium matrix composites. Composite Science and Technologies. 2008. Vol. 68, No. 6. pp. 1273–1281.
20. Sanguinetti Ferreira R. A., Arvieu C., Guillaume B. et al. Titanium matrix composites processed by continuous binder-powder coating: An alternative fabrication route. Composites Part A: Applied Science and Manufacturing. 2006. Vol. 37, No. 10. pp. 1831–1836.
21. Lacoste E., Arvieu C., Quenisset J.-M. Correlation between microstructures of SiC-reinforced titanium matrix composite and liquid route processing parameters. Journal of Materials Science. 2015. Vol. 50, No. 16. pp. 5583–5592.

Language of full-text russian
Full content Buy
Back