Journals →  CIS Iron and Steel Review →  2021 →  #2 →  Back

Metal Science and Metallography
ArticleName Non-metallic inclusions interpretation technique for factory expertise of metal product defects
DOI 10.17580/cisisr.2021.02.08
ArticleAuthor A. A. Kazakov, V. A. Murysev, D. V. Kiselev
ArticleAuthorData

“Thixomet” JSC, St. Petersburg, Russia:

A. A. Kazakov, Dr. Eng., Prof., Head of “Metallurgical Examination” Lab., e-mail: kazakov@thixomet.ru
D. V. Kiselev, Technical Director, “Metallurgical Examination” Lab.

JSC Vyksa Steel Works, Vyksa, Russia:

V. A. Murysev, Chief Specialist of the Engineering and Technology Center

Abstract

The technique of processing the results of factory experts’ reports has been developed to interpret the origin of nonmetallic inclusions (NMIs) detected in the defects of a welded pipe joints made of J55 API 5L (22GYu) steel. Thermodynamic simulation was performed to assess the possibility of the indigenous origin of these inclusions. The results of such a simulation were summarized using radar diagrams of four clusters uniting NMIs with similar composition of deoxidation and modification products. More than 130 compositions of actual inclusions detected on dozens of welded joints samples were processed and combined into four clusters in the same way. After a comparative analysis of these two types of radar diagrams, the origin of all clusters of actual inclusions was established, three of which are predominantly exogenous inclusions and the fourth is predominantly indigenous. None of the clusters contains only indigenous inclusions or only exogenous ones. The main source of inclusions in the discontinuities of welded joints is inclusions conglomerates, sorbed on the refractories surface, contacted with molten steel during its ladle treatment and pouring. These sintered conglomerates of indigenous and exogenous inclusions, that form three clusters of four ones, were out washed by the flow of steel melt into the crystallizer during steel pouring. The reasons for the formation of the fourth cluster are related to “cold welding”. The technique is implemented as a plug-in of Thixomet Pro image analysis system and allows to automate the process of metallographic conclusions generation in factory practice, as well as to accumulate all information in a database for its subsequent processing and analysis.

keywords Metal products defects, non-metallic inclusions, exogenous, indigenous, clustering, thermodynamics, origin, automation
References

1. Kazakov A. A., Kovalev P. V., Ryaboshuk S. V. Metallurgical examination as the base for determination of origin of defects in metal products. CIS Iron and Steel Review. 2007. Vol. 2. pp. 7–13.
2. Kazakov А. А., Kovalev P. V., Chigintsev L. S. et. al. The nature of defects of hot-rolled sheet steel pipe grades. Part 1. Defects having a steelmaking nature. Chernye Metally. 2007. No. 11. pp. 8–15.
3. Kazakov А. А., Kovalev P. V., Andreeva S. V. et. al. The nature of defects of hot-rolled sheet steel pipe grades. Part 2. Defects formed at the stage of rolling production. Chernye Metally. 2008. No. 12. pp. 10–14.
4. Kazakov A. Nonmetallic inclusions in steel — origin, estimation, interpretation and control. Microscopy and Microanalysis. 2016. Vol. 22. pp. 1938–1939. DOI: 10.1017/ S1431927616010539.
5. In-Ho Jung I., Decterov S., Pelton A. Computer applications of thermodynamic databases to inclusion engineering. ISIJ International. 2004. Vol. 44. Iss. 3. pp. 527–536. DOI: 10.2355/ isijinternational.44.527.
6. Adaba O., Kaushik P., O’Malley R., Lekakh S. et al. Characteristics of spinel inclusions formed after reoxidation of calciumtreated aluminum-killed steel. Proceedings of the Iron and Steel Technology Conference. 2016. Vol. 3. pp. 2559–2572.
7. Andersson J.-O., Helander T., Höglund L., Shi P., Sundman B. Thermo-Calc and DICTRA, computational tools for materials science. Calphad. 2002. Vol. 26. Iss. 2. pp. 273–312. DOI: 10.1016/S0364-5916(02)00037-8.
8. Bale C. W., Bélisle E., Chartrand P., Decterov S. A., Eriksson G. et al. FactSage thermochemical software and databases — 2010–2016. Calphad. 2016. Vol. 54. pp. 35–53.
9. Jung I. Overview of the applications of thermodynamic databases to steelmaking processes. Calphad. 2010. Vol. 34. Iss. 3. pp. 332–362. DOI: 10.1016/j.calphad.2010.06.003.
10. Li Y., Yang W., Zhang L. Formation mechanism of MgO containing inclusions in the molten steel refined in MgO refractory crucibles. Metals. 2020. Vol. 10. p. 444. DOI: 10.3390/met10040444.
11. Chunyang Liu, Xu Gao, Sun-joong Kim, Shigeru Ueda, Shinya Kitamura, Dissolution Behavior of Mg from MgO–C Refractory in Al-killed Molten Steel. ISIJ International. 2018. Vol. 58. Iss. 3, pp. 488–495. DOI: 10.2355/isijinternational.ISIJINT-2017-593
12. Kazakov A. A., Zhitenev A. I., Salynova M. A. Extension of ASTM E2283 standard practice for the assessment of large exogenous nonmetallic inclusions in super duty steels. CIS Iron and Steel Review. 2019. Vol. 18. pp. 20–26. DOI: 10.17580/cisisr.2019.02.01
13. Kazakov А. А., Murysev V. A., Kiselev D. V. Interpretation of nature of non-metallic inclusions in assessing the quality of metal products in the industrial conditions. Chernye Metally. 2021. No. 9. pp. 47–54. DOI: 10.17580/chm.2021.09.08
14. Jain A. K., Murty M. N., Flynn P. J. Data clustering: A. ACM Computing Surveys. 1999. Vol. 31. No. 3. pp. 1–69. DOI: 10.1145/331499.331504.
15. GOST 21014–88. Rolled products from ferrous metals. Surface defects. Terms and definitions. Introduced: 01.01.1990. Moscow: Izdatelstvo standartov. 1988.

Full content Non-metallic inclusions interpretation technique for factory expertise of metal product defects
Back