Journals →  Chernye Metally →  2024 →  #1 →  Back

60th anniversary of the Dept. of Metallurgical Equipment of Lipetsk State Technical University
ArticleName Substantiation of design and technological parameters of a rotary-impact shredder for steel crushed shot
DOI 10.17580/chm.2024.01.07
ArticleAuthor A. P. Zhiltsov, E. P. Levchenko, O. I. Akimova, D. A. Vlasenko
ArticleAuthorData

Lipetsk State Technical University, Lipetsk, Russia

A. P. Zhiltsov, Cand. Eng., Associate Prof., Prof., Dept. of Metallurgical Equipment, e-mail: mo@stu.lipetsk.ru

 

Donbass State Technical University, Alchevsk, Russia
E. P. Levchenko, Cand. Eng., Associate Prof., Prof., Dept. of Technology and Organization of Mechanical Engineering Production, e-mail: levchenkop@yandex.com
O. I. Akimova, Senior Lecturer, Dept. of Mining Energy-Mechanical Systems, e-mail: pavlinenko@yandex.com
D. A. Vlasenko, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies, e-mail: VlsnkDA@yandex.ru

Abstract

The results of the study of the grinding process of steel spherical shot by a single constrained impact are presented, the design of a rotary impact shredder for its production is described, as well as the method of substantiating its structural and technological parameters. Analytical dependences for determining the amount of fraction destroyed by a single constrained blow are proposed, the required mass of the striker, the required speed of the grinding body, the moment of resistance on the rotor shaft and the required drive power of the shredder. The results of physical modeling of the process of grinding steel crushed shot with a constrained impact and experimental substantiation of the design and technological parameters of a rotary impact shredder are presented. The empirical studies carried out confirmed the adequacy of the developed method for determining the main design and technological parameters of the shredding machine – the average relative error of the results of the methods and analytical dependencies did not exceed 20.1 %. Based on the results of the study, the design, power and technological parameters of a rotary impact shredder for the production of crushed steel spherical shot in the conditions of LLC "Steel Shot Plant" (Alchevsk) are proposed.

keywords Grinding, steel chipped spherical shot, constrained impact, rotary impact shredder, design and technological parameters, performance, drive power
References

1. Kozlov D. Yu. Blasting: guide to highly effective abrasive blast cleaning. Ekaterinburg : ID "Feniks", 2007. 216 p.
2. Gurchenko P. S. et al. Production of cast steel heat-treated shot in the conditions of machinebuilding enterprises. Minsk : Belarus navuka, 2014. 113 p.
3. Balan K. Аn insider’s perspective. The critical role of metallic shot in achieving consistent shot peening results. The Shot Peener. 2017. Vol. 31, Iss. 4. pp. 12–18.
4. GOST 11964–81. Cast iron and steel shot for industrial use. General specifications. Introduced: 01.01.1983.
5. Anandu S. А., Arunroy N. S., Noel F. et al. Influence of steel shots in achieving high density concrete. International Journal of Civil Engineering and Technology. 2018. Vol. 9, Iss. 13. pp. 1745–1750.
6. Cha Y., Oh T. M., Joo G. W. et al. Performance and reuse of steel shot in abrasive waterjet cutting of granite. Rock Mechanics and Rock Engineering. 2021. Vol. 54. pp. 1551–1563. DOI: 10.1007/s00603-020-02332-8
7. Delgado F., Rodríguez S. A., Coronado J. Effect of chemical composition and shot peening treatment on Hadfield steel swing hammers exposed to impact wear. The 10th International Conference BALTTRIB'2019. Kaunas, Lithuania : Akademija, 2019. pp. 87–93.
8. Kirichek A. V., Soloviev D. L., Afonin A. N. et al. Technological methods for strengthening machine parts. Moscow : Mashinostroenie, 2009. 296 p.
9. Andreev S. E., Zverevich V. V., Perov V. A. Crushing, grinding and screening of minerals. Moscow : Nedra, 1980. 415 p.
10. Klushantsev B. V., Kosarev A. I., Museummnek Yu. A. Crushers. Design, calculation, operating features. Moscow : Mashinostroenie, 1990. 320 p.
11. Subba Rao D. V. Minerals and coal process calculations. London : Taylor & Francis Group, 2016. 354 p.
12. Sergo E. E. Crushing, grinding and screening of minerals : textbook for universities. Moscow : Nedra, 1985. 285 p.
13. Pavlinenko O. I., Levchenko E. P., Cheban V. G. Analysis of the possibility of using existing technical means for producing steel crushed shot. Collection of scientific works of Donetsk National Technical University. Special issue “Metallurgical processes and equipment”. 2016. No. 4 (3). pp. 38–44.
14. Pavlinenko O. I., Zhiltsov A. P., Cheban V. G., Levchenko E. P. et al. Method of materials destruction with limited impact. Patent RF, No. 2729155. Applied: 02.09.2019. Published: 04.08.2020. Bulletin No. 22.
15. Pavlinenko O. I., Vlasenko D. A., Levchenko E. P. Validation of the design and technological parameters of a rotary impact mill for production of crushed shot. Vestnik DonNTU. 2019. No. 4 (18). pp. 3–9.
16. Pavlinenko O. I., Vlasenko D. A., Levchenko E. P. Analytical methods for validation of main parameters of the process of splitting steel shot by constrained impact. Collection of scientific works of Donetsk State Technical University. 2019. Iss. 15 (58). pp. 106–112.
17. Zhiltsov A. P., Pavlinenko O. I., Vlasenko D. A., Levchenko E. P. Analysis of parameters of the process of splitting steel spherical shot by a constrained central impact. Chernye Metally. 2020. No. 8. pp. 29–33.
18. Paraschiv G., Moiceanu G., Voicu G. Optimization issues of a hammer mill working process using statistical modeling. Sustainability. 2021. Vol. 13, Iss. 2. 973. DOI: 10.3390/su13020973
19. Vlasenko D. A. Estimating the efficiency of a hammer mill with combined methods for suspending hammers by a rotor. Steel in Translation. 2023. Vol. 53. No. 9. pp. 805–809.
20. Arzamasov B. N. et al. Structural materials : reference book. Moscow : Mashinostroenie, 1990. 688 p.
21. Medvedev B. V. The beginnings of theoretical physics. Mechanics, field theory, elements of quantum mechanics. Moscow : Fizmatlit, 2007. 38 p.
22. Hergert H. Classical mechanics. Michigan State University, 2019. 86 p.
23. Zubarev D. N. Physical encyclopedia. Vol. 2. Moscow : Sovetskaya entsiklopediya, 1990. 704 p.
24. GOST 10708–82. Pendulum impactors. Specifications. Introduced: 30.06.1983.
25. Usoltsev A. A. Electric drive: textbook. Saint Petersburg : NIU ITMO, 2012. 238 p.
26. Belay G. E., Dembovsky V. V., Sotsenko O. V. Organization of a metallurgical experiment: textbook for universities. Moscow : Metallurgiya, 1993. 256 p.
27. Brownlee K. A. Statistical theory and methodology in science and engineering. Moscow : Nauka, 1977. 407 p.
28. Armin I. Approximation theory and algorithms for data analysis (Texts in Applied Mathematics). Springer, 2018. 358 p.

Language of full-text russian
Full content Buy
Back