Journals →  Gornyi Zhurnal →  2024 →  #3 →  Back

MINING PROCESSES
ArticleName Pilot testing of pretension rock bolting technology in Oktyabrsky Mine
DOI 10.17580/gzh.2024.03.08
ArticleAuthor Ustinov A. K., Ksenafontov A. N., Tatsienko V. P., Tsarev D. V.
ArticleAuthorData

NorNickel’s Polar Division, Norilsk, Russia

A. K. Ustinov, Head of Mining Technology Improvement Department, Center for Geodynamic Safety
A. N. Ksenafontov, Mining Engineering Manager, Center for Mining Planning, Management and Control, Oktyabrsky Mine

 

Gorbachev Kuzbass State Technical University, Kemerovo, Russia
V. P. Tatsienko, Professor, Doctor of Engineering Sciences, tatsienkovp@kuzstu.ru
D. V. Tsarev, Researcher, Institute of Industrial and Environmental Safety

Abstract

In the world practice, pretension bolting is an efficient and reliable method of mine support. This method is used in anchorage of strong rock masses, in slope reinforcement and in soil stabilization, and in other engineering solutions. Pretension of cable bolts ensures their increased load-bearing capacity. The review of the current foreign design procedures for the pretension rock bolting shows that in the same geological conditions, the proposed rock bolting technology enables decreasing the bolt length and density by up to 30 % and 20 %, respectively. The mineral mining specialists of NorNickel’s Polar Division considered the offer by the Institute of Industrial and Environmental Safety of the Gorbachev Kuzbass State Technical University on the pretension rock bolting technology testing as deep-level installation of rock bolts is performed currently without their pretension. Such tests were earlier carried out in mines in Kuzbass. For the tests in mines of NorNickel’s Polar Division, a program–procedure of the pilot pretension bolting technology was duly elaborated, coordinated and approved. The pilot tests were successfully implemented in Oktyabrsky Mine, and the high technical level of the tests was emphasized. The testing program is accomplished in full, and the results allow recommending the pretension bolting technology for large-scale application in mines of NorNickel’s Polar Division.
The authors appreciate participation of specialists of NorNickel’s Polar Division in this study, namely, I. V. Kopranov, Department of Mining Safety, O. P. Lyashenko, V. I. Savelkov and V. A. Gorpinchenko, Center for Geodynamic Safety.

keywords Rock bolting, deep-seated bolt, underground opening, load-bearing capacity, bolt pretension, bolt resistance, rock displacement, underground tests
References

1. Tastienko V. P., Bubnov K. A., Nashatyrev A. G., Tsarev D. V., Zavolokina E. A. Factory (bench) and mine tests of anchor fasteners with pre-tensioning. Vestnik Nauchnogo tsentra po bezopasnosti rabot v ugolnoy promyshlennosti. 2023. No. 4. pp. 62–68.
2. Wardas A., Bobek R., Śledź T., Twardokęs J., Ratajczak A. et al. Ground control for ensuring the stabilisation of roadways located at considerable depths in the conditions of natural and mining risks. Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią Polskiej Akademii Nauk. 2016. No. 94. pp. 53–66.
3. Kaiser P. K., Cai M. Design of rock support system under rockburst condition. Journal of Rock Mechanics and Geotechnical Engineering. 2012. Vol. 4, No. 3. pp. 215–227.
4. Skrzypkowski K. Laboratory testing of a long expansion rock bolt support for energyabsorbing applications. Proceedings of XVII Conference of PhD Students and Young Scientists. 2017. E3S Web of Conferences. 2018. Vol. 29. ID 00004.
5. Luo T. X. H., Lai W. W. L., Giannopoulos A. Forward modelling on GPR responses of subsurface air voids. Tunnelling and Underground Space Technology. 2020. Vol. 103. ID 103521.
6. Ma H.-C., Tan X.-H., Qian J.-Z., Hou X.-L. Theoretical analysis of anchorage mechanism for rock bolt including local stripping bolt. International Journal of Rock Mechanics and Mining Sciences. 2019. Vol. 122. ID 104080.
7. Ding W., Huang X., Wang Z., Chen L. Experimental study on the shear performance of a prestressed anchored jointed rock-like mass under different corrosion levels. International Journal of Rock Mechanics and Mining Sciences. 2022. Vol. 158. ID 105209.

8. Rotkegel M., Stałęga S., Węzik W., Schopp W. Improving the work conditions of support through the application of mechanical lining. Prace Naukowe GIG. Seria Konferencje—Systemy obudowy wyrobisk korytarzowych dla zapewnienia stateczności i poprawy bezpieczeństwa pracy. Katowice, 2007. pp. 151–158.
9. Vikulov V. M. Substantiation of ascending anchor support effectiveness and the estimation of deep foundation pit wall barriers stability. Izvestiya vuzov. Gornyi zhurnal. 2018. No. 7. pp. 28–36.
10. Masaev Yu. A., Politov A. P., Kopytov A. I., Masaev V. Yu. Improving roof bolting structures for mine opening constructions. Vestnik Nauchnogo tsentra VostNII po promyshlennoy i ekologicheskoy bezopasnosti. 2018. No. 4. pp. 66–73.
11. Chen J., Liu P., Liu L., Zeng B., Zhao H. et al. Anchorage performance of a modified cable anchor subjected to different joint opening conditions. Construction and Building Materials. 2022. Vol. 336. ID 127558.
12. Demin V. F., Demina T. V., Kochneva L. V., Kuznetsov A. M. Technological schemes, methods, types and means of fastening the contours of mine workings in difficult mining and geological operating conditions. Safety of processes and productions. IV International Conference Proceedings. Yekaterinburg : Izdatelstvo UGGU, 2022. pp. 11–16.
13. Available at: https://docs.cntd.ru/document/573156117 (accessed: 15.04.2021).
14. Galchenko Yu. P., Eremenko V. A., Kosyreva M. A., Vysotin N. G. Features of secondary stress field formation under anthropogenic change in subsoil during underground mineral mining. Eurasian Mining. 2020. No. 1. pp. 9–13.
15. Sonnov M. A., Trofimov A. V., Rumyantsev A. E., Shpilev S. V. Application of numerical and block geomechanical modelling to determine parameters of large-section chambers. Gornaya promyshennost. 2021. No. 2. pp. 127–131.

Language of full-text russian
Full content Buy
Back