Журналы →  Gornyi Zhurnal →  2012 →  №4 →  Назад

DRILLING AND BLASTING OPERATIONS
Название The resource saving technologies of the blasthole drilling on the Yakutian diamond ore open pits
Автор Doynikov Yu. A., Belyaev A. E.
Информация об авторе

OJSC АLROSА:

Doynikov Yu. A., Vice-president of a Conpany


Irkutsk State Technical University:

Belyaev A. E., Professor, Doctor of Engineering Sciences, e-mail: belae@irk.ru

Реферат

Permafrost damp rocks have very unstable thermal conditions. They are rather sensitive to the external influences. Physical and mechanical properties of the permafrost damp rocks considerably change even at small temperature fluctuations. The analysis of permafrost rocks` properties and long-term experience of well-drilling allows to specify the basic directions of development technologies of drilling operations on diamond open-cast mines: creation of special executive powers for drilling operations; stabilisation of a thermal conditions; choice of type and parameters of the drilling tool, appropriateness to the properties of the drilled rocks. Improvement of the operating members of rock-drilling machines includes the complex of scientific and technical developments: methods of calculation and parameters` choice of a drill fines` pneumatic transportation system of from a boreholes; increasing methods of cutting-reller bits` firmness; principles of a choice and calculation of drilling bits` parameters; designs of cutting bits with a blow of boreholes by the compressed air; designs of combined cutting and cutting-reller bits; a parametrical range of the cutting and combined bits; devices for normalisation of a temperature rate of bits` drilling; an engineering technique of bits` drilling on diamond ore open pits of Yakutia.

Ключевые слова Diamond ore open pits, permafrost rocks region, physical and mechanical properties, cutting and cutting-reller bits, rock destruction, cutting transport, thermal conditions, resource saving technologies
Библиографический список

1. Doynikov Yu. A., Belyaev A. E. Usloviya i spetsifika bureniya skvazhin na almazorudnykh karerakh Yakutii (Conditions and specifics of holes drilling on the diamond ore open pits of Yakutia), Novocherkassk : NPI Publ., 1999, pp. 63–68.

2. Doynikov Yu. A., Belyaev A. E., Strabykin N. N. Gornoe oborudovanie i elektromekhanikaMining Equipment and Electromechanics, 2009, No. 6, pp. 54–56.

3. Doynikov Yu. A., Belyaev A. E., Goryachkin V. M. Gornoe oborudovanie i elektromekhanika – Mining Equipment and Electromechanics, 2010, No. 2, pp. 12–15.

4. Doynikov Yu. A., Belyaev A. E., Strabykin N. N. Izv. vuzov. Gornyi zhurnal – Proceedings of the universities. Mining journal, 2010, No. 5, pp. 61–67.

5. Doynikov Yu. A., Peretolchin V. А., Belyaev A. E. Ratsionalnoe prirodopolzovanie pri osvoenii resursov Sibirskogo regiona (The rational use of natural resources in the development of the resources of the Siberian region), Irkutsk : Irkutsk State Technical University Publ., 1998, pp. 69–76.

6. Doynikov Yu. A.,Belyaev A. E., Strabykin N. N. Gornoe oborudovanie i elektromekhanika – Mining Equipment and Electromechanics, 2010, No. 1, pp. 37–41.

7. Belyaev A. E., Strabykin N. N. Gornye mashiny i avtomatika – Mining machines and automation, 2002, No. 7, pp. 32–35.

8. Doynikov Yu. A., Belyaev A. E. Vestnik Chitinskogo Gosudarstvennogo UniversitetaJournal of Chita State University, 2010, No. 1, pp. 11–16.

Language of full-text русский
Полный текст статьи Получить
Назад