Journals →  Non-ferrous Мetals →  2011 →  #2 →  Back

HEAVY NON-FERROUS METALS
ArticleName Thermodynamic analysis of microimpurities distribution between the products of Kola MMC pyrometallurgical production
ArticleAuthor Popov V. A., Tsemekhman L. Sh., Dyachenko V. T., Besedovskiy S. G., Savinova Yu. A.
ArticleAuthorData

Gipronickel Institute

V. A. Popov, Senior Researcher, Laboratory of Pyrometallurgy, e-mail: VAPop@nikel.spb.su
L. Sh. Tsemekhman, Head of Laboratory of Pyrometallurgy

Yu. A. Savinova, Junior Researcher, Post-graduate Student

 

OJSC “MMC “Norilsk Nickel”
V. T. Dyachenko, Chief of Scientific and Technical Direction

 

Kola MMC

S. G. Besedovskiy, First Deputy General Director, Chief Engineer

Abstract

With the use of a complex of programs and FactSage data basis for thermodynamic calculations there was carried out thermodynamic analysis of microimpurities distribution between the products of Kola MMC pyrometallurgical products for several types of outside feed — copper-cobalt alloy of Konkola Copper Mines, copper cake from Norilsk Nickel Harjavalta and matte from Fortaleza electro furnaces. As options for these materials processing the authors have considered autogenous smelting, smelting in ore-thermal furnaces, converting together with conventional products; separately they have analyzed circuits for produced slags processing. The article presents the dependence of arsenic, lead, zinc and bismuth recovery to smelting products on the process temperature. There is emphasized that the design composition of interacting phases is close enough to the industrial data. Basing on the results of the calculations there are given recommendations on the possibility of outside feed processing and preferable methods.

keywords Thermodynamic analysis, FactSage, microimpurities, arsenic, lead, zinc, bismuth
References

1. Morachevskiy A. G., Sladkov I. B. Termodinamicheskie raschety v metallurgii : spravochnik (Thermodynamic Calculations in Metallurgy : Reference Book). Moscow, 1993. 304 pp.
2. Anosov V. Ya., Ozerova M. I., Fialkov Yu. Ya. Osnovy fiziko-khimicheskogo analiza (Fundamentals of Physical and Chemical Analysis). Moscow, 1976. 504 pp.
3. FactSage. Ofitsialnyy sayt. Official site. [Electronic resource]. Access mode : http://www.factsage.com/
4. Bale C. W., Chartrand P., Decterov S. A. et al. Calphad Journal. 2002. Vol. 62. pp. 189–228.
5. Malakhov I. E., Mikhaylov S. V., Shishkin L. D. Povedenie myshyaka i surmy pri pirometallurgicheskom proizvodstve medi (Arsenic and Antimony Behavior in the Pyrometallurgical Production of Copper). Moscow, 1991.
6. Tarasov A. V., Bagrova T. A. Povedenie soputstvuyushchikh elementov v protsessakh plavki sulfidnogo medsoderzhashchego syrya (Accompanying Elements Behavior in the Sulphide Copper-containing Raw Materials Melting Processes). Moscow, 1994. 40 pp.
7. Vaskevich A. D., Vanyukov A. V., Bruek V. N. Kompleks. ispolz. mineralnogo syrya — Multipurpose Utilization of Mineral Resources. 1981. No. 8. pp. 36–39.
8. Pozdnyakov V. Ya., Chetvertkov M. S. Tsvetnye Metally — Non-ferrous Metals. 1971. No. 4. pp. 18–23.
9. Coursol P., Stubina N. Met. and Mat. Trans. B. 2005. Vol. 36, No. 3. pp. 411–413.
10. Ramana G. Reddy, Jonkion M. Font. Met. and Mat. Trans. B. 2003. Vol. 34, No. 5. pp. 565–571.

Language of full-text english
Full content Buy
Back