Журналы →  Non-ferrous Мetals →  2011 →  №2 →  Назад

HEAVY NON-FERROUS METALS
Название The experience of scanning electron microscopy and electron probe microanalysis use for the purpose of non-ferrous materials study
Автор Ertseva L. N.
Информация об авторе

Gipronickel Institute

L. N. Ertseva, Chief Researcher, Laboratory of Pyrometallurgy, phone: +7(812)335-31-63

Реферат

In the middle of the last century all produced equipment could be conditionally divided into two groups — scanning electron microscopes and micro analyzers. They were different in terms of their technical characteristics and intended for different purposes. Accordingly two methods — electron microscopy and microanalysis — though having general backgrounds developed in parallel. During 1970–1980 two important changes took place — on the first hand automated instruments had appeared using special software for results processing, different for different fields of investigations. On the second hand, due to better quality of semi-conductor detectors classic microanalysers started to be displaced by complexes “microscope + microanalysis system”, widely used currently. The paper considers in short theoretical backgrounds of scanning electron microscopy and electron probe microanalysis. There are described stages of the use of the equipment implemented in Gipronickel Institute starting from 1969, and there are investigated characteristic features of the studies conducted with the use of detectors based on wavelength dispersive analysis and those on the basis of power dispersion. The examples of the procedures worked out in the process of each type of the equipment adaptation for solving theoretical and technical problems of non-ferrous metallurgy.

Ключевые слова Scanning electron microscopy, electron probe microanalysis, non-ferrous metallurgy materials, methods, features, developments, devices
Language of full-text английский
Полный текст статьи Получить
Назад