Tsvetnye Metally
The 8-th issue of the journal «Tsvetnye Metally» (Non-ferrous metals) (August, 2014) shares the problems of theory and practice of concentration, production and processing of non-ferrous metals, complex use of crude ore, economics and management of production and metallurgical processes automation.
The article, published in the section «Economics and management of production», describes the research of the problem of competitive lagging of Russian metallurgy from enterprises of South-East Asian countries (especially China). There were made the conclusions, approving the meaning of innovation policy of metallurgical enterprises as the basic condition of overcoming of competitive lagging from the developing countries.
The article «Development of technology of Udokan deposit ores processing», published in the section «Benefication», describes the carried out laboratory researches in the time of development of Udokan deposit ores processing flowsheet. As a result, the main parameters of technological process were defined. Developed technological scheme provides obtaining of qualitative marketable products with high indices of extraction from sulfide, mixed and oxidized Udokan deposit ores, which, in turn, allows to carry out the processing of all technological types of ores by one flowsheet, and refuse the organization of selective extraction, which is too complex on deposit.
The article by N. V. Vorobev-Desyatovskiy and D. V. Ermakov tells about non-oxidation methods of detoxication of cyanide solutions and pulps of gold-mining industry. These methods are based on ion binding in insoluble or relatively low-toxic strength compounds. Method of cyanide solutions detoxication, using ion-exchange resins (anionites), is also considered in this article together with latest achievements in the area of use of cyanide ions oxidation by atmospheric oxygen on activated coals, functioning as catalysts.
Heat-resistant titanium alloys are widely applied as the materials of components of aviation gas-turbine engines compressor rotor. All these components are exposed to the influence of cyclical loads and high temperatures in exploitation process. The article by M. S. Belyaev, M. A. Gorbovets, O. S. Kashapov and I. A. Khodinev (All-Russian Scientific-Research Institute of Aviation Materials) describes the research of dependence of main strength characteristics, including the fatigue cracks growth ratio with temperatures of 20 and 600 ºC from structural state of heat-resistant titanium alloy VT41 (ВТ41). Research was carried out on forging samples. The forging was manufactured by two different schemes: with final deformation with one-phase area temperatures; and with final deformation with two-phase area temperatures.
The 85-th anniversary of «Giprotsvetmet» institute is in September, 2014. The article, devoted to this event, is included in the section «Chronicle». «Giprotsvetmet» is one of the leading institutes in Russia on designing of non-ferrous metallurgy enterprises, and main designer in the area of copper and lead-zinc sub-branches of industry in Russia and abroad. Institute made a significant contribution in creation and development of Russian non-ferrous metallurgy both in Russia and CIS countries.
You may find below more details about the issue or book printed or electronic version of the journal.
Korneev S. I., Senior Analyst of "Managing Company "Metalloinvest" LLC, e-mail: nirsks@yandex.ru
1Chair of Economics, National Research Naucear University MEPhI (Moscow Engineering Physics Institute), Moscow, Russia; 2“Ore and Metals” Publishing House, Moscow, Russia:
A. G. Vorobev, Professor, Head of a Chair1, Chief Editor2
“Ore and Metals” Publishing House, Moscow, Russia.
D. V. Timokhin, Deputy Head of a Chair, e-mail: dtprepod@yandex.ru
M. S. Ivanova, Senior Lecturer
G. I. Popova, Senior Lecturer
L. S. Serebryannaya, Senior Lecturer
LLC “Baikal Mining Company”, Udokan, Russia:
D. A. Lapshin, Head of Department of Designing of Technical Management, e-mail: d.lapshin@metalloinvest.com
M. F. Prostakishin, Leading Industrial Engineer of Experimental-Industrial Complex
V. N. Zolotarev, Chief Technologist of Experimental-Industrial Complex
I. N. Khramtsova, Head of Analytical Service of Technical Management
Moscow State Mining University (National University of Science and Technology “MISiS”), Moscow, Russia:
V. A. Bocharov, Professor (Chair of Ore Concentration)
College of Ecotechnologies and Engineering (National University of Science and Technology “MISiS”), Moscow, Russia:
V. A. Ignatkina, Professor (Chair of Ore Concentration), e-mail: woda@mail.ru
All-Russian Scientific-Research Institute of Chemical Technologies, Moscow, Russia:
V. Yu. Koltsov, Head of Department, e-mail: basilik2@yandex.ru
A. A. Baikov Institute of Metallurgy and Materials Science, Moscow, Russia:
V. A. Bryukvin, Head of Laboratory, e-mail: brukvin@imet.ac.ru
A. O. Bolshikh, Leading Researcher
JSC “Norilsk Nickel MMC”, Norilsk, Russia.
V. T. Dyachenko, Head of Department of Innovation Development
Chair of Chemistry and Technology of Rare and Scattered Elements, Moscow State University of Fine Chemical Technologies, Moscow, Russia.
T. B. Elemesov, Post-Graduate Student
Chair of Materials Science of Semiconductors and Non-conductors, National University of Science and Technology "MISiS", Moscow, Russia.
E. A. Skryleva, Leading Researcher
JSC “Polymetal Engineering”, Saint Petersburg, Russia:
N. V. Vorobev-Desyatovskiy, Head of Hydrometallurgy Department, e-mail: vdesjatovsky@polymetal.spb.ru
SRK Consulting, Moscow, Russia:
D. V. Ermakov, Senior Concentration Engineer
Kaluga branch of Bauman Moscow State Technical University, Kaluga, Russia:
I. V. Fedoseev, Professor of a Chair of Chemistry, e-mail: prof.Igor.Fedoseev@gmail.com
National Mineral Resources University (University of Mines), Saint Petersburg, Russia:
M. Sh. Barkan, Assistant Professor of a Chair of Geoecology
Siberian Federal University, Krasnoyarsk, Russia:
S. G. Shakhray, Assistant Professor, e-mail: shahrai56@mail.ru
JSC “RUSAL Krasnoyarsk”, Krasnoyarsk, Russia:
A. V. Belyanin, Ecology and Quality Executive Officer
Irkutsk National Research Technical University, Irkutsk, Russia:
V. V. Kondratev, Assistant Professor
LLC “RUSAL Engineering-Technical Center”, Krasnoyarsk, Russia:
I. I. Lapaev, Manager
Chair of Physical and Colloid Chemistry, Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia:
A. S. Korsakov, Senior Lecturer
L. V. Zhukova, Chief Researcher, Professor, e-mail: l.v.zhukova@ustu.ru
V. S. Korsakov, Post-Graduate Student
D. S. Vrublevskiy, Post-Graduate Student
D. D. Salimgareev, Student
Institute of Chemical Sciences named after A. B. Berkutov, Almaty, Republic of Kazakhstan:
E. E. Ergozhin, Chief Executive Officer
T. K. Chalov, Chief Researcher
A. I. Nikitina, Leading Researcher
Kazakh-British Technical University, Almaty, Republic of Kazakhstan:
A. Pidakhmet, Doctoral Candidate, e-mail: Pidahmet_aidyn@mail.ru
Institute of Metallurgy of Ural Department of Russian Academy of Sciences, Ekaterinburg, Russia:
L. Yu. Udoeva, Senior Researcher, e-mail: lyuud@yandex.ru
V. M. Chumarev, Chief Researcher
L. I. Leontev, Chief Researcher
N. I. Selmenskikh, Researcher
All-Russian Scientific Research Institute of Aviation Materials, Moscow, Russia:
M. S. Belyaev, Leading Researcher, e-mail: bms-oti@mail.ru
M. A. Gorbovets, Head of a Sector
O. S. Kashapov, Leading Engineer
I. A. Khodinev, First Category Engineer
Siberian State Industrial University, Novokuznetsk, Russia:
I. F. Selyanin, Professor (Chair of Materials Science, Foundry and Welding Fabrication)
A. I. Kutsenko, Assistant Professor, Head of Department of Scientific Researches
O. G. Prikhodko, Assistant Professor, Head of Education and Methodological Department
National University of Science and Technology “MISiS”, Moscow, Russia:
V. B. Deev, Chief Researcher of Engineering Center “Foundry Technologies and Materials”, Professor of a Chair of Foundry Processes Technology
Tomsk Polytechnic University, Tomsk, Russia:
S. N. Kladiev, Assistant Professor
S. M. Slobodyan, Professor (Institute of Natural Resources), e-mail: sms_46@ngs.ru
Seversk Technological Institute of National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Seversk, Russia:
V. P. Pishchulin, Professor (Chair of Machinery and Apparatuses of Chemical and Nuclear Industries)
All-Russian Scientific-Research Institute of Inorganic Materials, Moscow, Russia:
N. A. Matyushkin, Senior Researcher, e-mail: empire@bochvar.ru
LLC “Uralstroymontazh”, Izhevsk, Russia:
E. P. Semenovykh, Head of a Site
V. A. Pushin, Managing Director
JSC “Chepetsky Mechanical Plant”, Glazov, Russia:
S. E. Pogudin, Chief Production Preparation Engineer
JSC “Giprotsvetmet”, Moscow, Russia:
V. A. Potylitsyn, Chief Executive Officer, e-mail: office@giprocm.ru