Tsvetnye Metally
This issue includes the article by A. E. Cherepovitsyn, S. V. Fedoseev, A. B. Teslya and E. Yu. Vyboldina (the section «Economics and Management of Production»), where modern tendencies of production and consumption of raw material resources in the EU and BRICS countries are considered on example of rare-earth metals' market, together with volumes and structure of global reserves of rare-earth metals.
The largest part of this issue is devoted to the 80-th anniversary of JSC «Chelyabinsk Zinc Plant» – leading Russian manufacturer of high-quality zinc and zinc-based alloys, the only Russian manufacturer of Special High Grade zinc, and leader of Russian zinc industry. The Plant constructed the multi-level system of ecological monitoring and realized the range of large-scale measures on redesign of all technological production stages. The articles of the members of Chelyabinsk Zinc Plant consider both implemented technologies, and the technologies, which are on the stage of pilot and laboratory testings.
You may find below more details about the issue or book printed or electronic version of the journal.
Korneev S. I., Senior Analyst of "Managing Company "Metalloinvest" LLC, e-mail: nirsks@yandex.ru
National Mineral Resources University, Saint Petersburg, Russia:
A. E. Cherepovitsyn, Head of a Chair of Organization and Management, Economics Faculty, e-mail: alekseicherepov@inbox.ru
Saint Petersburg State Polytechnic University, Saint Petersburg, Russia:
S. V. Fedoseev, Professor of a Chair “Global and Regional Economics”, Engineering-Economics Institute
A. B. Teslya, Assistant Professor of a Chair “Global and Regional Economics”, Engineering-Economics Institute
E. Yu. Vyboldina, Post-Graduate Student of a Chair “Global and Regional Economics”, Engineering-Economics Institute
A. Baikov Institute of Metallurgy and Materials Science, Moscow, Russia:
+A. A. Palant
S. V. Palant, Engineer-Researcher
V. A. Bryukvin, Head of Laboratory of Pyrometallurgy, e-mail: brukvin@imet.ac.ru
A. O. Bolshikh, Junior Researcher
LLC “UMMC-Holding”, Verkhnyaya Pyshma, Russia:
A. M. Panshin, Technical Director
LLC “Uraltsink”, Ekaterinburg, Russia:
R. M. Shakirzyanov, Commercial Officer
JSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia:
P. A. Izbrekht, Chief Executive Officer, e-mail: vab@zinc.ru
A. V. Zatonskiy, Technical Director
JSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia:
V. M. Terentev, Leading Engineer-Technologist of Engineering Center
A. A. Kondratyuk, Head of Calcination Shop, e-mail: aak@zinc.ru
E. Yu. Knaub, Senior Foreman of Calcination Shop
V. Yu. Nesmelov, Head of Bureau of Reconstruction and New Equipment of Engineering Center
JSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia:
P. A. Kozlov, Head of Engineering Center, pak@zinc.ru
JSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia:
Degtyarev A. M., Head of Waelz-shop
Ivakin D. A., Head of Technological Bureau of Engineering Center, e-mail: dai@zinc.ru
Shumilin Yu. P., Leading Production Engineer of Engineering Center
Mayorov S. P., Deputy Manufacturing Head of Waelz-shop
JSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia:
Yu. V. Reshetnikov, Deputy Technical Director — Production Control Manager, e-mail: uvr@zinc.ru
O. V. Belyakov, Head of Hydrometallurgical Shop
K. M. Kozlov, Deputy Manufacturing Head of Hydrometallurgical Shop
M. S. Varganov, Production Engineer of Engineering Center
JSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia:
A. V. Zatonskiy, Technical Director
O. V. Belyakov, Head of Hydrometallurgical Shop
P. A. Kozlov, Head of Engineering Center, e-mail: pak@zinc.ru
A. V. Nedospasov, Leading Production Engineer of Engineering Center
JSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia:
P. A. Kozlov, Head of Engineering Center, e-mail: pak@zinc.ru
V. N. Vyatkin, Leading Production Engineer of Engineering Center
Yu. V. Reshetnikov, Deputy Technical Director – Head of Production Department
LLC “UMMC-Holding”, Verkhnyaya Pyshma, Russia:
A. M. Panshin, Technical Diretor
LLC “UMMC-Holding”, Verkhnyaya Pyshma, Russia:
A. M. Panshin, Technical Diretor
JSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia:
Yu. V. Reshetnikov, Deputy Technical Director — Head of Production Department
D. A. Ivakin, Head of Technological Bureau of Engineering Center, e-mail: dai@zinc.ru
V. V. Geraskin, Leading Production Engineer of Engineering Center
JSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia:
A. V. Zatonskiy, Technical Director
K. V. Bovykin, Chief Technologist
R. R. Asadulin, Head of Leaching Shop, e-mail: rra@zinc.ru
E. V. Golubeva, Leading Processing Engineer of Engineering Center
LLC “UMMC-Holding”, Verkhnyaya Pyshma, Russia.
A. M. Panshin, Technical Director
Institute of Material Science and Metallurgy, Ural Federal University, Ekaterinburg, Russia:
M. G. Viduetskiy, Counselor of Director
JSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia
P. A. Kozlov, Head of Engineering Center
D. A. Ivakin, Head of Technological Bureau of Engineering Center, e-mail: dai@zinc.ru
JSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia:
O. A. Fatkhutdinova, Leading Production Engineer of Engineering Center, e-mail: oaf@zinc.ru
A. V. Zatonskiy, Technical Director
P. A. Kozlov, Head of Engineering Center
LLC “UMMC-Holding”, Verkhnyaya Pyshma, Russia:
A. M. Panshin, Technical Director
JSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia:
P. A. Kozlov, Head of Engineering Center, e-mail: pak@zinc.ru
D. A. Ivakin, Head of Technological Bureau of Engineering Center
Yu. V. Reshetnikov, Deputy Technical Director — Head of Production Department
Moscow State University of Fine Chemical Technologies named after M. V. Lomonosov, Moscow, Russia:
Ya. Yu. Ershova, Post-Graduate Student, e-mail: ershovajana@gmail.com
E. I. Lysakova, Assistant Professor
M. V. Tsygankova, Senior Researcher
A. M. Reznik, Professor
National University of Science and Technology “MISiS”, Moscow, Russia:
A. V. Koltygin, Assistant Professor of a Chair of Casting Process Technologies, e-mail: misistlp@mail.ru
V. E. Bazhenov, Senior Lecturer of a Chair of Casting Process Technologies
A. V. Fadeev, Leading Engineer of Engineering Center “Innovation Casting Technologies and Materials”
Peter the Great Saint Petersburg Polytechnic University, Saint Petersburg, Russia:
V. A. Talalov, Professor of a Chair of Hydroaerodynamics
R. V. Starykh, Assistant Professor of a Chair of Metallurgy Technology
Polar Division of JSC “Norilsk Nikel”, Norilsk, Russia:
L. V. Krupnov, Deputy Head of Scientific-Technical Department
LLC “Gipronikel” Institute, Saint Petersburg, Russia:
D. V. Rumyantsev, Senior Researcher of Laboratory of Metallurgy of Research and Development Department, e-mail: DVRum@nickel.spb.ru