Journals →  Chernye Metally →  2016 →  #5

Chernye Metally

The 5th issue of “Chernye metally” journal (2016) is opened by conventional sections – “Iron and steel news of the world” and “News of metallurgical companies”.

The paper “Large ESR forging ingots and their quality in production” by G. Mercurelli et al. examines ESR unit and the first results of comparative investigations for remolten and usual ingots on the base of experience of ASO Siderurgica and ALD Vacuum Technologies.

E. Ten and O. Kol from the National university of science and technology “MISiS” presented in their paper the effect of protective coatings of surface carbonizing of steel castings. Yu. Alyushin and other authors from the same university proposed in their article mathematical models of forming processes such as bending. These models allow to analyze the features of stressed-strained state in the cases of varying both geometric parameters of used equipment and mechanical properties of billet materials.

The third article in “Rolling” section by K. Lazzaro et al. from SMS Group is devoted to analysis of mechanical and electric components of the existing driving mechanisms in the framework of modernization processes. Its importance is stipulated by current strict requirements to the main drives of rolling mills.

The prospects and problems of continuous annealing of high-strength steels with improved properties have been considered by M. Blumenau and A. Bäumer from ThyssenKrupp Steel Europe. Necessity of modernization of the continuous annealing line in order to provide mass strip production from AHSS steels with tensile strength up to 1000 MPa is shown.

The issue also includes the papers in the sections “Metallurgy and automotive industry”, “Steel as material” and “Economics and finances”.

You may find below more details about the issue or book printed or electronic version of the journal.

ArticleName Iron and Steel News of the World
News of the Metallurgical Companies
ArticleName Modernization of the basic oxygen shop at SSAB plant in Luleе
ArticleName Improvement of ecological situation at the ThyssenKrupp Steel Eupope works in Duisburg
ArticleName Salzgitter to supply large diameter tubes and elbow pieces for Trans-Adriatic gas pipeline
ArticleName Manufacture of large-size forged ingots via electric slag remelting
ArticleAuthors G. Mercurelli, M. Zani, M. Svanera, U. Biebricher, H. Franz

ASO Siderurgica (Ospitaletto, Italy):

Mercurelli G.
Zani M.
Svanera M.


ALD Vacuum Technologies (Hanau, Germany):
Biebricher U., e-mail:
Franz H.

ArticleName New laboratorial system for improvement of control of technological process
ArticleAuthors Xiaoli Liang, Xianchun Zeng, H. G. Schmitz

Taiyuan Iron and Steel (Group) Co. Ltd. (Taiyuan, China):

Xiaoli Liang


Herzog (Shanghai) Automation Equipment Co. Ltd. (Shanghai, China):
Xianchun Zeng

Herzog Maschinenfabrik GmbH & Co. KG (Osnabrück, Germany):
Schmitz H. G., e-mail:

Casting and Foundry
ArticleName Action of protective coatings on surface carbonizing of steel castings
ArticleAuthors E. B. Ten, O. A. Kol

National University of Science and Technology “MISiS” (Moscow, Russia):

Ten Е. В., Dr. Eng., Prof., e-mail:
Kol O. A., Senior Lecturer

Rolling and Metal Forming
ArticleName Bending of sheet billets for longitudinal-welded tubes
ArticleAuthors Yu. A. Alyushin, S. V. Samusev, G. P. Zhigulev

National University of Science and Technology “MISiS” (Moscow, Russia):

Alyushin Yu. A., Dr. Eng., Prof.,
Samusev S. V., Dr. Eng., Prof.,
Zhigulev G. P., Cand. Eng., Ass. Prof.,

ArticleName Examination of innovated graphitized materials used for work rolls in hot strip mills
ArticleAuthors Ch. Zybill, V. Goryany, J. Buch, O. Myronova, M. Römschied

Karl Buch Qlzengiesserei GmbH & Co. KG (Siegen, Germany):

Zybill Ch., Dr., Head R&D, E-mail:
Goryany V., Dr. Eng., Senior Division Manager R&D
Buch J., Mag. Eng., Mag. Econ., Chairman


Duisburg University (Duisburg, Germany):
Myronova O., Dr. Eng., Senior Division Manager Metallurgy


Buderus Edelstahl GmbH (Wetzlar, Germany):
Römschied M., Man. Eng., Senior Division Manager Hot Rolling

ArticleName Solutions for modernization directed on the customers’ needs
ArticleAuthors K. Lazzaro, G. Hansberg

SMS Group GmbH (Hilchenbach, Germany):

Lazzaro K., Mag. Eng., e-mail:
Hansberg G., Mag. Eng.

Heating and heat Treatment
ArticleName Innovations of LOI Thermprocess in the field of heating, cooling and heat treatment
ArticleAuthor P. Wendt

LOI Thermprocess GmbH, Tenova Group (Essen, Germany):

Wendt P., Dr., e-mail:

ArticleName Problems and prospects of continuous annealing of AHSS steels with improved characteristics
ArticleAuthors M. Blumenau, A. Bдumer

ThyssenKrupp Steel Europe AG (Dortmund, Germany):

Blumenau M., Head of Continuous Annealing, Cold Rolling Shop No. 3, e-mail:


ThyssenKrupp Steel Europe AG (Duisburg, Germany):
Bäumer A., Head of the Project for Development of Multi-Phase Steels — Technology and Innovation

Metallurgy and automotive industry
ArticleName The prospects of decrease of car body weight by usage of Cr–Mn steels
ArticleAuthor S. Lindner

Outokumpu Nirosta GmbH (Krefeld, Germany):

Lindner S., Dr. Eng., Mag. Sc., Head of Automobile Designing Dept., e-mail:

ArticleName Innovative solutions in construction of lightweight automobiles
Steel as Material
ArticleName Reservoirs made of stainless steel in Germany
ArticleName Collaboration between the German regions in the development of new materials
ArticleName “Nano-drops” for steel forging
ArticleName Innovative “Materials of the Future” at the Material week 2015
Economics and finances
ArticleName Improvement of the enterprise operation
ArticleAuthors R. Feierabend, M. März

ConMoto Consulting Group GmbH (Munich, Germany):

Feierabend R., Dr. Eng.
März M., Prof., e-mail:

Journals →  Chernye Metally →  2016 →  #5