Journals →  Tsvetnye Metally →  2016 →  #5

Tsvetnye Metally



The «Benefication» item includes the article «Color identification of complex compounds of flotation collectors and metals in solutions and on mineral surface». It offers the qualitative method of confirmation of chemical adsorption of flotation reagents on mineral surface by the formed complex compounds coloring.


The article «Calculation of complete counter-current extraction cascade with exchange washing using EXCEL» (the item «Rare Metals, Semiconductors») detaily desctibes the calculation process and shows the successful use of Excel for definition of the required number of separation stages and the balance calculations of extraction process.


The «Materials Science» item includes the article, written by the members of All-Russian Institute of Aviation Materials. It describes the peculiarities of application of heat-resistant titanium alloy VT8-1 (ВТ8-1) for the bladed integrated disks of gas-turbine engine compressor. There are shown the basic factors, defining the technical requirements to the blisk-type bladed integrated disks made of tytanium alloys.


You may find below more details about the issue or book printed or electronic version of the journal.


ECONOMICS AND MANAGEMENT OF PRODUCTION
ArticleName International review of market of non-ferrous metals
ArticleAuthor Korneev S. I.
ArticleAuthorData

Korneev S. I., Senior Analyst of "Managing Company "Metalloinvest" LLC, e-mail: nirsks@yandex.ru

BENEFICATION
ArticleName Color identification of complex compounds of flotation collectors and metals in solutions and on mineral surface
ArticleAuthors Ivanova T. A., Chanturiya V. A., Zimbovskiy I. G., Koporulina E. V.
ArticleAuthorsData

Research Institute of Comprehensive Exploitation of Mineral Resources, Moscow, Russia:

T. A. Ivanova, Senior Researcher, e-mail: tivanova06@mail.ru
V. A. Chanturiya, Academician
I. G. Zimbovskiy, Researcher, Candidate of Engineering Sciences
E. V. Koporulina, Chief Geologist

ArticleName Development of Udokan deposit ore processing technology. Part 3. semi-industrial flowsheet testings
ArticleAuthors Lapshin D. A., Prostakishin M. F., Zolotarev V. N., Volozhaninov A. B.
ArticleAuthorsData

LLC “Baikal Mining Company”, Udokan, Russia:

D. A. Lapshin, Chief Technologist of Designed Direction, e-mail: d.lapshin@metalloinvest.com
M. F. Prostakishin, Leading Industrial Engineer of Experimental-Industrial Complex
V. N. Zolotarev, Chief Technologist of Experimental-Industrial Complex
A. B. Volozhaninov, Leading Industrial Engineer of Experimental-Industrial Complex

ArticleName Technology of flotation benefication of concentrates during Zavitinsk lithium-berillium deposit dumps processing
ArticleAuthors Egorov A. M., Lavrentev A. V., Sarychev G. A., Tananaev I. G.
ArticleAuthorsData

Leading Scientific-Research Institute of Chemical Technology, Moscow, Russia:

A. M. Egorov, Leading Researcher
A. V. Lavrentev, Head of Laboratory

 

National Research Nuclear University “MEPhI” (Moscow Engineering Physics Institute), Moscow, Russia:
G. A. Sarychev, Head of a Chair of Design of Apparatuses and Settings
I. G. Tananaev, Professor of a Chair of Design of Apparatuses and Settings, e-mail: geokhi@mail.ru

HEAVY NON-FERROUS METALS
ArticleName Improvement of hydrometallurgical processing of sulfide copper-nickel middlings
ArticleAuthors Fedoseev I. V., Barkan M. Sh.
ArticleAuthorsData

LLC “Tekhnolit”, Saint Petersburg, Russia:

I. V. Fedoseev, Scientific and Innovation Effort Consultant, e-mail: prof.igor.fedoseev@gmail.com

 

Saint Petersburg Mining University, Saint Petersburg, Russia:
M. Sh. Barkan, Assistant Professor, Chair of Geoecology, e-mail: barkan-msh@spmi.ru

ArticleName Upgrading the thermal performance of shaft furnaces during the air supply reconstruction. Part 1
ArticleAuthors Matyukhin V. I., Yaroshenko Yu. G., Matyukhin O. V., Bulatov K. V.
ArticleAuthorsData

Ural Federal University named after the First President of Russia B. N. Yeltsin, Ekaterinburg, Russia:

V. I. Matyukhin, Senior Researcher, Assistant Professor of a Chair of Thermal Physics and Informatics in Metallurgy, e-mail: matyhin53@mail.ru
Yu. G. Yaroshenko, Professor of a Chair of Thermal Physics and Informatics in Metallurgy, e-mail: yury-y@planet-a.ru
O. V. Matyukhin, Assistant Professor of a Chair of Thermal Physics and Informatics in Metallurgy, e-mail: matyhin53@mail.ru

 

LLC “Mednogorsk copper-sulfur combine”, Mednogorsk, Russia:
K. V. Bulatov, Chief Executive Officer

LIGHT METALS, CARBON MATERIALS
ArticleName Development of the method of electrolyzers' energy mode control for aluminium production
ArticleAuthors Sysoev I. A., Kondratev V. V., Shakhray S. G., Karlina A. I.
ArticleAuthorsData

National Research Irkutsk State Technical University, Irkutsk, Russia:

I. A. Sysoev, Leading Researcher of the Innovation Technologies Department of Physical and Technical Institute
V. V. Kondratev, Head of the Innovation Technologies Department of Physical and Technical Institute

A. I. Karlina, Deputy Head of Scientific Depatrment

 

Siberian Federal University, Krasnoyarsk, Russia:
S. G. Shakhray, Assistant Professor of a Chair of Technosphere Safety of Mining and Metallurgical Production, e-mail: shahrai56@mail.ru

RARE METALS, SEMICONDUCTORS
ArticleName Calculation of complete counter-current extraction cascade with exchange washing using EXCEL
ArticleAuthors Gasanov A. A., Semenov A. A., Apanasenko V. V., Yurasova O. V.
ArticleAuthorsData

JSC “Giredmet”, Moscow, Russia:

A. A. Gasanov, Head of Department of Especially Pure Substances, Rare and Rare-Earth Metals
V. V. Apanasenko, Head of Laboratory of Rare-Earth Metals and Compounds Separation Technology, e-mail: VVApanasenko@giredmet.ru
O. V. Yurasova, Head of Laboratory of Especially Pure Substances Obtaining Technology

 

LLC “Laboratory of Innovation Technologies”, Yubileyny, Moscow Region, Russia:

A. A. Semenov, Leading Engineer

ArticleName Investigations of beryllium distribution by copper-beryllium igature smelting products (Research and Production Association “Bazalt”)
ArticleAuthors Alekberov Z. M., Matyasova V. E., Kotsar M. L., Bykov A. D.
ArticleAuthorsData

Leading Scientific-Research Institute of Chemical Technology, Moscow, Russia:

Z. M. Alekberov, Leading Engineer, e-mail: zaur_alekberov@mail.ru
V. E. Matyasova, Leading Researcher
M. L. Kotsar, Head of Laboratory, e-mail: kotsar@vniiht.ru
A. D. Bykov, Leading Engineer

COMPOSITES AND MULTIPURPOSE COATINGS
ArticleName Development of coatings composition and equipment for repair and strengthening of power generating unit elements by plasma spraying
ArticleAuthors Bogdanovich V. I., Marin S. B., Dokukina I. A., Giorbelidze M. G.
ArticleAuthorsData

Samara State Aerospace University, Samara, Russia:
V. I. Bogdanovich, Professor of a Chair of Aircraft and Quality Management in Mechanical Engineering
I. A. Dokukina, Assistant Professor of a Chair of Aircraft and Quality Management in Mechanical Engineering
M. G. Giorbelidze, Post-Graduate Student of a Chair of Aircraft and Quality Management in Mechanical Engineering

Komsomolsk-on-Amur State Technical University, Komsomolsk-on-Amur, Russia:

S. B. Marin, Professor of a Chair of Mechanical Engineering and Metallurgy, e-mail: maryinsb@mail.ru

MATERIALS SCIENCE
ArticleName Peculiarities of application of heat-resistant titanium alloy VT8-1 (ВТ8-1) for the bladed integrated disks of gas-turbine engine compressor
ArticleAuthors Kashapov O. S., Pavlova T. V., Kondrateva A. R., Kalashnikov V. S.
ArticleAuthorsData

All-Russian Institute of Aviation Materials, Moscow, Russia:

O. S. Kashapov, Head of a Sector
T. V. Pavlova, Leading Engineer
A. R. Kondrateva, Engineer, e-mail: nasty.77@list.ru
V. S. Kalashnikov, Engineer

ArticleName Investigation of the influence of heat treatment on structure and properties of the specimens obtained by direct laser deposition
ArticleAuthor Gorunov A. I.
ArticleAuthorData

Kazan National Research Technical University named after A. N. Tupolev, Kazan, Russia:

A. I. Gorunov, Assistant Professor of a Chair “Laser Technologies”, e-mail: gorunow.andrej@yandex.ru

METAL PROCESSING
ArticleName Copper busbars extrusion on “Conform” installation with prechamber
ArticleAuthors Mochalin I. V., Gorokhov Yu. V., Belyaev S. V., Gubanov I. Yu.
ArticleAuthorsData

Kamensk-Uralsky Non-Ferrous Metal Working Plant, Kamensk-Uralsky, Russia:

I. V. Mochalin, Chief Executive Officer

 

Siberian Federal University, Krasnoyarsk, Russia:
Yu. V. Gorokhov, Professor of a Chair “Plastic Metal Working”, e-mail: 160949@list.ru
S. V. Belyaev, Head of a Chair “Foundry”
I. Yu. Gubanov, Senior Lecturer of a Chair “Plastic Metal Working”

ArticleName Improving of weldability of heat-strengthened aluminum alloys
ArticleAuthors Yakushin B. F., Bakulo A. V., Shiganov I. N.
ArticleAuthorsData

N. E. Bauman Moscow State Technical University, Moscow, Russia:

B. F. Yakushin, Professor of a Chair “Technologies of Welding and Diagnostics”
I. N. Shiganov, Professor of a Chair “Laser Technologies in Mechanical Engineering”

 

Military-Industrial Corporation “NPO Mashinostroyenia”, Reutov, Russia:

A. V. Bakulo, Chief Welder, e-mail: abakulo@yandex.ru

AUTOMATION
ArticleName Analysis and scientometrical forecasting of investigations and developments of thermoelectric materials
ArticleAuthors Brinza V. V., Filonov M. R., Loginova V. V., Anikin Yu. A.
ArticleAuthorsData

National University of Science and Technology “MISiS”, Moscow, Russia:

V. V. Brinza, Director of Scientific-research Technological Forecast Center, viachbrinza@mail.ru
M. R. Filonov, Pro-rector of Science anf Innovations
V. V. Loginova, Engineer
Yu. A. Anikin, Leading Expert

Journals →  Tsvetnye Metally →  2016 →  #5