• Покупка статей
  • Telegram_OreMet
Скрыть↑
Журналы →  CIS Iron and Steel Review →  2018 →  №1

CIS Iron and Steel Review



Raw Materials for Metallurgical Production
Название The research of autohesion properties of sintering burden
Авторы K. K. Turgunova, N. R. Timirbaeva, E. Kobegen, G. I. Sultamurat, L. I. Kaplun
Информация об авторах

Karaganda state technical university (Karaganda, Kazakhstan):

K. K. Turgunova, Mag. Tech., Quality control engineer, e-mail: kamila.turgunova@mail.ru
N. R. Timirbayeva, Mag. Stud., “Nanotechnology and metallurgy” chair, e-mail: nina_timir@mail.ru
Y. Kobegen, Post-graduate, “Nanotechnology and metallurgy” chair, e-mail: erbolat_911@inbox.ru
G. I. Sultamurat, Cand. Eng., Associate prof., “Nanotechnology and metallurgy” chair, e-mail:  sultamurat_gi@mail.ru

 

Ural federal university (Ekaterinburg, Russia):
L. I. Kaplun, Dr. Eng., Prof., “Metallurgy of iron and alloys” chair
Foundry and Casting
Название Influence of boron modification and cooling conditions during solidification on structural and phase state of heat- and wear-resistant white cast iron
Авторы V. M. Kolokoltsev, E. V. Petrochenko, O. S. Molochkova
Информация об авторах

Nosov Magnitogorsk state technical university (Magnitogorsk, Russia)

V. M. Kolokoltsev, Dr. Eng., Prof.
E. V. Petrochenko, Dr. Eng., Prof., e-mail: evp3738@mail.ru
O. S. Molochkova, Cand. Eng., Associate Prof.
Название Destruction mechanism of casting graphite in mechanical activation
Авторы I. E. Illarionov, T. R. Gilmanshina, A. A. Kovaleva, O. N. Kovtun, N. A. Bratukhina
Информация об авторах

Chuvash state university (Cheboksary, Russia):

I. E. Illarionov, Dr. Eng., Prof.

 

Siberian federal university (Krasnoyarsk, Russia):
T. R. Gilmanshina, Cand. Eng., Associate Prof., e-mail: gtr1977@mail.ru
A. A. Kovaleva, Cand. Eng., Associate Prof.
O. N. Kovtun, Cand. Eng., Associate Prof.
N. A. Bratukhina, Associate Prof.
Rolling and Metal Forming
Название Improvement of the slitting process for rebar rolling to increase the material yield and rolling mill 370 utilization at PJSC “MMK”
Авторы S. A. Levandovsky, O. N. Tulupov, A. B. Moller, D. I. Kinzin
Информация об авторах

Nosov Magnitogorsk state technical university (Magnitogorsk, Russia):

S. A. Levandovsky, Cand. Eng., Associate Prof., Chair “Materials treatment technologies”, e-mail: levandovskiy@mail.ru
O. N. Tulupov, Dr. Eng., Prof., Chair “Materials treatment technologies”, vice-rector for research and innovations,
A. B. Moller, Dr. Eng., Prof., Head of the chair “Materials treatment technologies”
D. I. Kinzin, Cand. Eng., Associate Prof., Chair “Materials treatment technologies”
Metal Finishing
Название Springback coefficient of round steel beam under elastoplastic torsion
Автор V. N. Shinkin
Информация об авторе

National University of Science and Technology “MISIS” (Moscow, Russia):

V. N. Shinkin, Dr. Sci. (Phys.-Math.), Prof., e-mail: shinkin-korolev@yandex.ru
Powder Metallurgy
Название Oxide powders production from iron chloride
Авторы I. Y. Motovilov, V. A. Luganov, B. Mishra, T. A. Chepushtanova
Информация об авторах

Kazakh national research technical university named after K. I. Satpaev (Almaty, Kazakhstan):

I. Yu. Motovilov, Doctoral student Ph.D. in metallurgy, Chair “Metallurgical furnaces, heat engineering and technology of special materials”, e-mail: motovilov88@inbox.ru
V. A. Luganov, Dr. Eng., Prof., Chair “Metallurgical furnaces, heat engineering and technology of special materials”
T. A. Chepushtanova, Cand. Eng., Associate Prof., Head of the Chair “Metallurgical furnaces, heat engineering and technology of special materials”


Worcester polytechnic university (Worcester, MA, USA):

B. Mishra, Dr. Eng., Prof., Director of the Institute for metal processing
Mechanical Properties of Metal Products
Название Simple analytical dependence of elastic modulus on high temperatures for some steels and alloys
Автор V. N. Shinkin
Информация об авторе

National University of Science and Technology “MISIS” (Moscow, Russia):

V. N. Shinkin, Dr. Sci. (Phys.-Math.), Prof., e-mail: shinkin-korolev@yandex.ru
Engineering Technologies
Название Ensuring precision for small arms lock assembly with consideration for interface contact stiffness
Авторы A. S. Yamnikov, A. A. Malikov, O. S. Kashmin, D. I. Troitsky.
Информация об авторах

Tula State University (Tula, Russia):

A. S. Yamnikov, Dr. Eng., Prof., Chair of Manufacturing Technology, e-mail: yamnikovas@mail.ru
A. A. Malikov, Dr. Eng., Prof., Head of the Chair of Manufacturing Technology
O. S. Kashmin, Cand. Eng., Associate Prof., Chair of Manufacturing Technology

 

TTS Translation and Software Agency (Tula, Russia):
D. I. Troitsky, Cand. Eng., Associate Prof., Director
Technopolis
Название Gender stereotypes of the metallurgical monotown
Авторы R. R. Vakhitov, O. P. Stepanova, L. A. Khabibulin, A. P. Merezhnikov
Информация об авторах

Nosov Magnitogorsk state technical university (Magnitogorsk, Russia)

R. R. Vakhitov, Cand. Ped., Associate Prof., Chair of Sport Development, e-mail: vahitov-roman@yandex.ru
O. P. Stepanova, Cand. Psych., Prof., Head of the Chair of Psychology
D. A. Khabibullin, Cand. Ped., Associate Prof., Chair of Psychology
A. P. Merezhnikov, Cand. Ped., Associate Prof., Chair of Psychology
Журналы →  CIS Iron and Steel Review →  2018 →  №1