Tsvetnye Metally
The June issue of the "Tsvetnye metally" journal presented to your attention clearly demonstrates the multidisciplinarity of the modern metallurgical industry. It includes scientific and technological developments in mining (mining and processing of metal ores), metallurgical (methods of obtaining metals, alloys and products based on them), chemical (development and research of modifying coatings on metal) and even information technologies (methods of optimizing research and production).
So, in the "Copper separation from waste of electroplating industries" article, published in the "Heavy non-ferrous metals" section, the authors present the results obtained in the study of the regeneration of copper-ammonia pickling solutions with obtaining dense copper deposits. The possibility of using the separated copper for metallization of substrates or for electrical purposes is reported.
The issue contains articles about equipment for fine hydraulic screening of crushed ores, for closed overflow of melt from a vacuum transport ladle.
A selection of articles on the use of nanomaterials for films and coatings deserves special attention.
In the "Modeling of deformations of aluminum shells during boring" article the aspect of the expediency of using high-strength aluminum alloys for manufacture of casings of high-pressure cylinders is considered. Mathematical modeling was carried out in the Solid-Works environment at the maximum calculated clamping force of the workpiece.
Please find more details below, or order your printed or electronic version of the Journal.
Kroosh Technologies ltd, Ashdod, Israel:
G. M. Kosoy, Chief Ore Concentration Specialist, Doctor of Technical Sciences, e-mail: grigory.k@kroosh.com
A. Ya. Vinnikov, Project Leader, Candidate of Technical Sciences
Khmelnytskyi National University, Khmelnytskyi, Ukraine:
A. A. Nester, Associate Professor at the Department of Construction and Civil Security, Doctor of Technical Sciences, e-mail: nesteranatol111@gmail.com
A. A. Nikitin, Associate Professor at the Department of Construction and Civil Security, Candidate of Technical Sciences
A. V. Pridoloba, Master’s Student at the Department of Foreign Language Practice and Teaching Methods
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Ukraine:
A. N. Husiev, Associate Professor at the Department of Safety and Industrial and Civil Security, Candidate of Technical Sciences
Institute of Chemistry and Chemical Technology of the Siberian Branch of the RAS – Division of Federal Research Center “Krasnoyarsk Scientific Center of the Siberian Branch of the RAS”, Krasnoyarsk, Russia1 ; Siberian Federal University, Krasnoyarsk, Russia2:
O. V. Belousov, Leading Researcher at the Laboratory of Hydrometallurgical Processes1, Associate Professor at the Department of Non-Ferrous Metallurgy2, Doctor of Chemical Sciences
R. V. Borisov, Research Fellow at the Laboratory of Hydrometallurgical Processes1, Associate Professor at the Department of Mineral Processing2, Candidate of Chemical Sciences, e-mail: roma_boris@list.ru
Siberian Federal University, Krasnoyarsk, Russia:
N. V. Belousova, Head of the Department of Non-Ferrous Metallurgy, Professor, Doctor of Chemical Sciences
A. I. Ryumin, Associate Professor at the Department of Non-Ferrous Metallurgy, Candidate of Technical Sciences
MIREA - Russian Technological University, Lomonosov Institute of Fine Chemical Technologies, Moscow, Russia:
E. V. Volchkova, Associate Professor at the K. A. Bolshakov Department of Chemistry and Technology of Rare Elements, Candidate of Chemical Sciences, e-mail: volchkovaev@bk.ru
A. S. Filinova, Student at the K. A. Bolshakov Department of Chemistry and Technology of Rare Elements
School of Non-Ferrous Metals and Materials Science, Siberian Federal University, Krasnoyarsk, Russia:
V. N. Baranov, Director, Candidate of Technical Sciences, e-mail: vnbar79@mail.ru
B. P. Kulikov, Lead Researcher, Doctor of Chemical Sciences, e-mail: kulikov-boris@yandex.ru
E. G. Partyko, Junior Researher, e-mail: elforion@mail.ru
P. O. Yuriev, Junior Researher, e-mail: pashka_urew@mail.ru
Platov South-Russian State Polytechnic University (NPI), Novocherkassk, Russia.
B. M. Goltsman, Assistant Professor, Department “General Сhemistry and Тechnology of Silicates”, Candidate of Technical Sciences, e-mail: boriuspost@gmail.com
E. A. Yatsenko, Head of Department “General Chemistry and Technology of Silicates”, Doctor of Technical Sciences, Professor, e-mail: e_yatsenko@mail.ru
L. A. Yatsenko, Post-Graduate Student, Department “General Chemistry and Technology of Silicates”, e-mail: okolelova@dd-lab.ru
Federal Research Centre “The Southern Scientific Centre of the Russian Academy of The Sciences”, Novocherkassk, Russia:
V. A. Irkha, Senior Researcher, Laboratory “Physics and technologies of semiconductor nanoheterostructures for microwave electronics and photonics”, Candidate of Physics and Mathematics Sciences, e-mail: Irkha.vladimir@gmail.com
Belarusian State Technological University, Minsk, Belarus:
N. R. Prokopchuk, Professor at the Department of Polymer Composite Materials, Doctor of Chemical Sciences, Associate Member of the National Academy of Sciences of Belarus, e-mail: tnsippm@belstu.by
A. I. Globa, Associate Professor at the Department of Polymer Composite Materials1, Candidate of Chemical Sciences, e-mail: Orion-2308@yandex.ru
I. O. Laptik, Engineer at the Department of Polymer Composite Materials, e-mail: inna.laptik@yandex.ru
Saint Petersburg Mining University, Saint Petersburg, Russia:
A. G. Syrkov, Professor at the Department of General and Technical Physics, Doctor of Technical Sciences, e-mail: syrkovandrey@mail.ru
Saint Petersburg Electrotechnical University “LETI”, Saint Petersburg, Russia:
V. A. Tupik, Vice Rector for Research, Head of the Department of Microradio electronics and Radio Technology, Doctor of Technical Sciences, Professor
V. I. Margolin, Professor at the Department of Microradioelectronics and Radio Technology, Doctor of Technical Sciences, Professor, e-mail: V.Margolin@mail.ru
D. K. Kostrin, Associate Professor at the Department of Electronic Equipment and Devices, Candidate of Technical Sciences
Kotelnikov Institute of Radioengineering and Electronics of the Russian Academy of Sciences, Moscow, Russia:
A. A. Potapov, Principal Researcher, Doctor of Physics & Mathematics Sciences, Professor
Baykov Institute of Metallurgy and Materials Science of the Russian Academy of Sciences, Moscow, Russia:
S. B. Rumyantseva, Junior Researcher, e-mail: sbvarlamova@gmail.com
United Engine Corporation JSC, Moscow, Russia:
B. A. Rumyantsev, Principal Specialist, Candidate of Technical Sciences
Bauman Moscow State Technical University, Moscow, Russia:
V. N. Simonov, Professor, Doctor of Technical Sciences
Perm National Research Polytechnic University (PNRPU), Perm, Russia:
Yu. D. Shchitsyn, Professor, Head of the Department of Welding, Metrology and Materials Engineering, Doctor of Technical Sciences, e-mail: schicin@pstu.ru
E. A. Krivonosova, Professor at the Department of Welding, Metrology and Materials Engineering, Doctor of Technical Sciences, e-mail: katerinakkkkk@mail.ru
T. V. Olshanskaya, Associate Professor at the Department of Welding, Metrology and Materials Engineering, Doctor of Technical Sciences, e-mail: tvo66@mail.ru
R. G. Nikulin, Postgraduate Student at the Department of Welding, Metrology and Materials Engineering, e-mail: nikromonger.ro@gmail.com
Vyatka State University, Kirov, Russia:
M. Z. Pevzner, Professor at the Department of Materials Processing Technology, Candidate of Technical Sciences, e-mail: mikhailpevzner@yandex.ru
Moscow Polytechnic University, Moscow, Russia:
R. L. Shatalov, Professor at the Department of Material Forming and Additive Technology, Doctor of Technical Sciences, e-mail: mmomd@mail.ru
Kirov Non-Ferrous Metals Processing Plant JSC, Kirov, Russia:
A. K. Tolstobrov, Chief Metallurgist, e-mail: tolstobrovak@gmail.com
T. V. Budneva, Lead Research Engineer
A. A. Agafonov, Deputy Chief Engineer – Head of the Engineering Department
Tula State University, Tula, Russia:
A. S. Yamnikov, Professor at the Department of Mechanical Engineering, Doctor of Technical Sciences, e-mail: yamnikiovas@mail.ru
A. O. Chuprikov, Associate Professor at the Department of Mechanical Engineering, Candidate of Technical Sciences, e-mail: artemline@rambler.ru