Journals →  CIS Iron and Steel Review →  2022 →  #1

CIS Iron and Steel Review



Preparation of raw materials
ArticleName Study of possibility of magnetic hydrocyclone use in concentration cycles of oxidized ferriferous quartzites
ArticleAuthors V. V. Lvov, T. N. Aleksandrova, V. B. Kuskov, A. E. Pelevin
ArticleAuthorsData

St. Petersburg Mining University (St. Petersburg, Russia):

V. V. Lvov, Cand. Eng., Associate Prof., Dept. of Mineral Processing, e-mail: Lvov_VV@pers.spmi.ru
T. N. Aleksandrova, Dr. Eng., Prof., Head of Dept. of Mineral Processing, e-mail: Aeksandrova_TN@pers.spmi.ru
V. B. Kuskov, Cand. Eng., Associate Prof., Dept. of Mineral Processing, e-mail: Kuskov_VB@pers.spmi.ru

 

Ural State Mining University (Ekaterinburg, Russia):
A. E. Pelevin, Dr. Eng., Associate Prof., Dept. of Mineral Processing, e-mail: a-pelevin@yandex.ru

Ironmaking
ArticleName Comprehensive index of compound blast furnace smelting
ArticleAuthors P. I. Chernousov, A. E. Karpalev, A. V. Kramar, V. O. Podusovskiy
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow, Russia):

P. I. Chernousov, Cand. Eng., Associate Prof., e-mail: p.chernou@yandex.ru
A. E. Karpalev, Graduate Student
A. V. Kramar, Master’s Degree Student
V. O. Podusovskiy, Graduate Student

ArticleName Investigation of factors affecting the safety of a blast furnace operation
ArticleAuthors E. P. Pototskiy, T. S. Lazareva
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow, Russia):

E. P. Pototskiy, Cand. Eng., Associate Prof., Dept. of Technosphere Safety, e-mail: pep@disto.misis.ru
T. S. Lazareva, Postgraduate Student, Dept. of Technosphere Safety, e-mail: lazareva.ts@misis.ru

Casting and Foundry
ArticleName Use of experimental casting equipment for research of castings crystallized through individual cooling procedures
ArticleAuthors N. I. Gabelchenko, A. A. Belov, N. A. Kidalov, S. R. Polyak
ArticleAuthorsData

Volgograd State Technical University (Volgograd, Russia):

N. I. Gabelchenko, Cand. Eng., Associate Prof., Dept. “Machines and technology of casting production”
A. A. Belov, Cand. Eng., Lecturer, Dept. “Machines and technology of casting production”, e-mail: aa-belov@bk.ru
N. A. Kidalov, Dr. Eng., Prof., Head of Dept. “Machines and technology of casting production”, e-mail: mitlp@vstu.ru
S. R. Polyak, Student

 

M. D. Bezmogorychnyi participated in this work.

Rolling and other Metal Forming Processes
ArticleName Development of new composition for sHSS steel used for hot rolling mill rolls at Magnitogorsk Iron and Steel Works
ArticleAuthors V. M. Kolokoltsev, N. A. Feoktistov, A. S. Savinov, E. V. Skripkin
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

V. M. Kolokoltsev, Dr. Eng., Prof., President of the University, e-mail: kwm@magtu.ru
N. A. Feoktistov, Cand. Eng., Associate Prof., Head of the Dept. of Casting Processes and Materials Science, e-mail: fna87@mail.ru
A. S. Savinov, Dr. Eng., Prof., Director of the Institute of Metallurgy, Machine-building and Material Processing, e-mail: savinov_nis@mail.ru
E. V. Skripkin, Magister Student

ArticleName Providing steel with an approximate application of the mechanical properties of wire rod 5.5-6.5 mm from sreel grades 70-75 based on a conventional twin of the Stelmor process
ArticleAuthors A. B. Moller, O. N. Tulupov, S. A. Levandovskiy, D. A. Nazarov
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

A. B. Moller, Dr. Eng., Prof., Head of the Dept. of Materials Processing Technologies, e-mail: amoller@mail.ru
O. N. Tulupov, Dr. Eng., Prof., Dept. of Materials Processing Technologies, Vice-Rector for Research and Innovation
S. A. Levandovskiy, Cand. Eng., Associate Prof., Dept. of Materials Processing Technologies, e-mail: levandovskiy@mail.ru
D. A. Nazarov, Postgraduate Student, Dept. of Materials Processing Technologies

ArticleName Minimization of dies volume using uniform distribution of hollows in the conditions of multi-cycle fatigue dependence on temperature
ArticleAuthor I. K. Andrianov
ArticleAuthorData

Komsomolsk-na-Amure State University (Komsomolsk-na-Amure, Russia):

I. K. Andrianov, Cand. Eng., Associate Prof., Institute of Machine Science and Metallurgy, Far Eastern Branch of RAS, e-mail: ivan_andrianov_90@mail.ru

ArticleName On calculation of stress-strain state of steel closed ropes in extension and twisting. Part 2. Influence of torsion on the stress-strain state of closed rope
ArticleAuthors V. F. Danenko, L. M. Gurevich
ArticleAuthorsData

Volgograd State Technical University (Volgograd, Russia):

V. F. Danenko, Cand. Eng., Associate Prof., e-mail: omd@vstu.ru
L. M. Gurevich, Dr. Eng., Associate Prof.

Tubemaking
ArticleName Modelling of the sheet forming while 3-roller bending process
ArticleAuthors G. P. Zhigulev, M. M. Skripalenko, V. A. Fadeev, M. N. Skripalenko, V. N. Danilin
ArticleAuthorsData

DKN-T JSC (Moscow, Russia):

G. P. Zhigulev, Cand. Eng., e-mail: aldebaran2000@yandex.ru

 

National University of Science and Technology “MISiS” (Moscow, Russia):
M. M. Skripalenko, Cand. Eng., Associate Prof., Metal Forming Dept., e-mail: mms@misis.ru
V. A. Fadeev, Cand. Eng., Metal Forming Dept., e-mail: fdv_viktor@mail.ru
M. N. Skripalenko, Cand. Eng., Associate Prof., Metal Forming Dept., e-mail: tfsmn@yandex.ru
V. N. Danilin, Cand. Eng., Associate Prof., Metal Forming Dept., e-mail: danilinvn@yandex.ru

ArticleName Analytical calculation of sheet curvature in four-roll mills at tubes production
ArticleAuthor V. N. Shinkin
ArticleAuthorData

National University of Science and Technology “MISiS” (Moscow, Russia):

V. N. Shinkin, Dr. Phys.-Math., Professor, e-mail: shinkin-korolev@yandex.ru

Coatings application and Corrosion protection
ArticleName Features and regularities in formation of diffusion nickel-copper coatings on steels in the medium of low-melting liquid-metal solutions
ArticleAuthors A. G. Sokolov, E. E. Bobylev
ArticleAuthorsData

Kuban State Technological University (Krasnodar, Russia):

A. G. Sokolov, Dr. Eng., Prof.
E. E. Bobylev, Cand. Eng., Senior Lecturer, e-mail: ebobylev@mail.ru

ArticleName Technological basis for the process of application of diffusion coatings in liquid metal melts with use of electric furnaces with air atmosphere
ArticleAuthors N. A. Serdiuk, E. I. Pryakhin, A. V. Sivenkov
ArticleAuthorsData

St. Petersburg Mining University (St. Petersburg, Russia):

N. A. Serdiuk, Post-graduate Student
E. I. Pryakhin, Dr. Eng., Prof., Head of Dept. of Material Science and Technology of Artefacts1, e-mail: e.p.mazernbc@yandex.ru
A. V. Sivenkov, Cand. Eng., Associate Prof.

Metal Science and Metallography
ArticleName TRIP steels: the features of chemical composition and structure, prospects of application (overview)
ArticleAuthors D. A. Gorlenko, D. V. Konstantinov, M. A. Polyakova, M. Dabala
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

D. A. Gorlenko, Cand. Eng., Associate Prof., Dept. of Casting Processes and Materials Science, e-mail: d.gorlenko@magtu.ru
D. V. Konstantinov, Cand. Eng., Head of the Dept. of International Affairs
M. A. Polyakova, Dr. Eng., Associate Prof., Dept. of Materials Processing Technologies

 

University of Padova (Padova, Italy):
M. Dabalá, Dr. Eng., Prof.

 

A. G. Korchunov, Dr. Eng., Prof., Head of the Dept. of Designing and Operation of Metallurgical Equipment participated in this work.

ArticleName Diagram of the phase composition of the Fe - Si - Al system and its isothermal sections
ArticleAuthors A. A. Akberdin, A. S. Kim, A. S. Orlov, R. B. Sultangaziev
ArticleAuthorsData

Chemical and Metallurgical Institute named after Zh. Abishev (Karaganda, Kazakhstan):

A. A. Akberdin, Dr. Eng., Prof., Head of the Bor laboratory
A. S. Kim, Dr. Eng., Chief Researcher of the Bor laboratory
A. S. Orlov, Dr. Eng., Senior Researcher of the Bor laboratory, e-mail: wolftailer@mail.ru
R. B. Sultangaziev, Dr. Eng., Senior Researcher of the Bor laboratory

ArticleName Structure, defect substructure and fracture surface of low-carbon alloy steel welds
ArticleAuthors N. A. Kozyrev, R. E. Kryukov, V. E. Gromov, Yu. A. Shlyarova
ArticleAuthorsData

Siberian State Industrial University (Novokuznetsk, Russia):

N. A. Kozyrev, Dr. Eng., Prof., Head of the Dept. of Materials Science, Foundry and Welding Production
R. E. Kryukov, Cand. Eng., Associate Prof., Dept. of Materials science, Foundry and Welding Production
V. E. Gromov, Dr. Phys.-Math., Prof., Head of the Dept. of Natural Sciences named after prof. V. M. Finkel, e-mail: gromov@physics.sibsiu.ru
Yu. A. Shliarova, Postfraduate Student, Dept. of Natural Sciences named after prof. V. M. Finkel

ArticleName Determination of rail steel structural elements via the method of atomic force microscopy
ArticleAuthors A. E. Balanovskiy, M. G. Shtaiger, V. V. Kondratyev, A. I. Karlina
ArticleAuthorsData

Irkutsk National Research Technical University (Irkutsk, Russia):

A. E. Balanovskiy, Cand. Eng., Associate Prof.

 

Mechel Steel Management Company (Moscow, Russia):
M. G. Shtaiger, Cand. Eng., Chief operating Officer

 

A. P. Vinogradov Institute of Geochemistry of the Siberian Branch of the Russian Academy of Sciences (Irkutsk, Russia):
V. V. Kondratyev, Cand. Eng., Senior Scientific Researcher

 

Moscow State University of Civil Engineering (Moscow, Russia):
A. I. Karlina, Cand. Eng., Scientific Researcher, e-mail: karlinat@mail.ru

Powder Metallurgy
ArticleName Structure and properties of additive products manufactured from electroerosion powders
ArticleAuthors E. V. Ageev, E. V. Ageeva, A. Yu. Altukhov
ArticleAuthorsData

South-West State University (Kursk, Russia):

E. V. Ageev, Dr. Eng., Associate Prof., Dept. “Technology of materials and transport”, Head of Scientific Education Center “Powder metallurgy and functional coatings”, e-mail: ageev-ev@mail.ru
E. V. Ageeva, Dr. Eng., Associate Prof., Dept. “Technology of materials and transport”, e-mail: ageeva-ev@yandex.ru
A. Yu. Altukhov, Cand. Eng., Associate Prof., Head of the Dept. “Technology of materials and transport”, e-mail: ail997@yandex.ru

Refractory materials
ArticleName Study of aluminosilicate refractories after operation in the presence of fluorine-containing wastes
ArticleAuthors E. A. Sidorina, A. Z. Isagulov, I. D. Kashcheev, K. G. Zemlyanoy
ArticleAuthorsData

Karaganda Technical University named after Abylkas Saginov, Karaganda, Republic of Kazakhstan:

E. A. Sidorina, Doctoral Candidate, e-mail: elena.sidorina.78@mail.ru
A. Z. Isagulov, Dr. Eng., Prof., Executive Director

 

Ural Federal University, Ekaterinburg, Russian Federation:

I. D. Kashcheev, Dr. Eng., Prof., Dept. of Chemical Technology of Ceramics and Refractories, Institute of New Metallurgical Technologies
K. G. Zemlyanoy, Cand. Eng., Associate Prof., Dept. of Chemical Technology of Ceramics and Refractories, Institute of New Metallurgical Technologies, e-mail: kir77766617@yandex.ru

Quality of Products
ArticleName On necessity of taking into account statistical nature of the objects using Big Data in metallurgy
ArticleAuthors A. V. Kudrya, E. A. Sokolovskaya, D. F. Kodirov, E. V. Bosov, G. V. Kotishevskiy
ArticleAuthorsData

National University of Science and Technology (Moscow, Russia):

A. V. Kudrya, Dr. Eng., Prof., e-mail: AVKudrya@misis.ru
E. A. Sokolovskaya, Cand. Eng., Associate Prof.
D. F. Kodirov, Post-graduate Student
E. V. Bosov, Post-graduate Student

 

“Novye tekhnologii kachestva” (Moscow, Russia):
G. V. Kotishevskiy, Advisor of General Director

Power Engineering
ArticleName Primary diagnosis of energy efficiency in an integrated steel plant, based on intensive energy-saving methodology. Part 2
ArticleAuthors S. V. Kartavtsev, E. G. Neshporenko, S. V. Matveev
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

S. V. Kartavtsev, Dr. Eng., Prof., Dept. of Heat Engineering and Power Engineering Systems, e-mail: kartavzw@mail.ru
E. G. Neshporenko, Cand. Eng., Associate Prof., Head of the Dept. of Heat Engineering and Power Engineering Systems
S. V. Matveev, Engineer, Dept. of Heat Engineering and Power Engineering Systems

Ecology and Recycling
ArticleName Thermophysical processes in dry granulation of metallurgical slags
ArticleAuthors S. V. Panchenko, M. I. Dli, M. V. Chernovalova, N. S. Kulyasov
ArticleAuthorsData

Smolensk Branch of the National Research University “Moscow Power Engineering Institute” (Smolensk, Russia):

S. V. Panchenko, Dr. Eng., Prof., Dept. of Physics, e-mail: tan_pan@inbox.ru
M. I. Dli, Dr. Eng., Prof., Head of the Dept. of Information Technologies in Economics and Management, e-mail: midli@mail.ru
M. V. Chernovalova, Junior Researcher, e-mail: 0208margarita@bk.ru

 

Plekhanov Russian University of Economics (Moscow, Russia):
N. S. Kulyasov, Cand. Econ., Leading Researcher of the Higher School of Tariff Regulation, e-mail: nkulyasov@gmail.com

Journals →  CIS Iron and Steel Review →  2022 →  #1