Journals →  Tsvetnye Metally →  2022 →  #10

Tsvetnye Metally



The articles included in the October issue of Tsvetnye Metally are authored by members of the Department of Physical Problems of Materials Science at the National Research Nuclear University MEPhI, who present their research findings accumulated over the last years. The current issue is marking the 80th anniversary of the University and the Department, which were founded at the same time. The issue is devoted to the heritage of Boris A. Kalin, the founder and leader of a research school for almost four decades.


The issue features four articles on reactor materials, which examine the properties and behavior of zirconium alloys during heat-treatment and neutron radiation, the behavior of clad tubes with protective coatings during high-temperature oxidation; analyze the anisotropy of the physical and mechanical properties of zirconium items on the basis of their substructural inhomogeneity and crystallographic texture.


The Reactor Functional Materials section features two articles demonstrating the possibility of substituting corrosion resistant steels with vanadium alloys, which do not interact with metallic uranium-molybdenum fuel. One of the papers looks at the effect of ion beam radiation on the microstructure and porosity of dysprosium hafnate, which is aimed at predicting the reliability of absorber elements in extreme conditions.


The High-Temperature Materials section features a paper that looks at the effect of laser scanning strategy and heat treatment on the mechanical performance of a material produced from nickel alloy powder by selective laser melting.


A great interest to brazed joints and high-strength materials resulted in conducting extensive studies into rapid-quenched microcrystalline and amorphous alloys, amorphous ribbons and bulk amorphous/crystalline parts. The relevant research papers are published in the Fast-Quenched Alloys section.


The Functional Materials section describes the results of studies that looked at the structure and properties of superelastic alloys and at betavoltaic cells.

 

Please find more details below, or order your printed or electronic version of the Journal.


REACTOR CONSTRUCTION MATERIALS
ArticleName Effect of reactor irradiation on the elemental composition, sizes and crystal structure of second phase precipitates in zirconium alloys E110 and E635
ArticleAuthors Obukhov A. V., Kobylyanskiy G. P.
ArticleAuthorsData

RIAR JSC, Dimitrovgrad, Russia:

A. V. Obukhov, Senior Researcher at the Department of Reactor Materials Science, Candidate of Technical Sciences, e-mail: micron1803@mail.ru
G. P. Kobylyanskiy, Lead Researcher at the Department of Reactor Materials Science, Doctor of Technical Sciences, e-mail: gpk@niiar.ru

ArticleName Effect of substructural inhomogeneity on the anisotropy of physical and mechanical properties of textured materials
ArticleAuthors Isaenkova M. G., Krymskaya O. A.
ArticleAuthorsData

National Research Nuclear University MEPhI, Moscow, Russia:

M. G. Isaenkova, Professor, Doctor of Physics & Mathematics Sciences, e-mail: MGIsaenkova@mephi.ru
O. A. Krymskaya, Associate Professor, Candidate of Physics & Mathematics Sciences, e-mail: OAKrymskaya@mephi.ru

ArticleName Crystallographic texture and structure formed in rolled sheets of zirconium alloys during annealing
ArticleAuthors Klyukova K. E., Isaenkova M. G., Krymskaya O. A., Fesenko V. A.
ArticleAuthorsData

National Research Nuclear University MEPhI, Moscow, Russia:

K. E. Klyukova, Engineer, Postgraduate Student
M. G. Isaenkova, Doctor of Physical and Mathematical Sciences, Professor, e-mail: isamarg@mail.ru
O. A. Krymskaya, Associate Professor, Candidate of Physical and Mathematical Sciences
V. A. Fesenko, Research Fellow

ArticleName High-temperature oxidation of zirconium alloys with magnetron sputtered chromium coatings
ArticleAuthors Isaev R. Sh., Safonov D. A., Dzhumaev P. S., Korenevskiy E. L.
ArticleAuthorsData

National Research Nuclear University MEPhI, Moscow, Russia:

R. Sh. Isayev, Postgraduate Student, Engineer at the Institute of Nuclear Physics and Technology
D. A. Safonov, Engineer at the Department of Physical Problems of Materials Science
P. S. Dzhumaev, Associate Professor at the Institute of Nuclear Physics and Technology, Candidate of Technical Sciences, e-mail: PSDzhumaev@mephi.ru
E. L. Korenevskiy, Postgraduate Student, Engineer at the Institute of Nuclear Physics and Technology

REACTOR FUNCTIONAL MATERIALS
ArticleName Compatibility of U – Mo and V – Ti – Cr аlloys at 900 oC
ArticleAuthors Nikitin S. N., Tarasov B. A., Shornikov D. P., Yurlova A. S.
ArticleAuthorsData

National Research Nuclear University MEPhI, Moscow, Russia:

S. N. Nikitin, Lead Engineer at the Sectoral Research & Development Lab 709, e-mail: mephi200809@yandex.ru
B. A. Tarasov, Principal Specialist at the Institute of Industrial Nuclear Technology, Candidate of Technical Sciences, e-mail: Batarasov@mephi.ru
D. P. Shornikov, Associate Professor at the Department of Physical Problems of Materials Science, Candidate of Technical Sciences, e-mail: d.p.shornikov@mail.ru
A. S. Yurlova, Engineer at the Central Radiation Safety Service of the Nuclear Centre, e-mail: nasyur@mail.ru

ArticleName Effect of ion beam radiation on the microstructure and porosity of dysprosium hafnate
ArticleAuthors Urusov A. A., Chuvikov S. V., Polunin K. K., Tenishev A. V.
ArticleAuthorsData

Luch Research & Production Association, Podolsk, Russia:

A. A. Urusov, Head of Laboratory
S. V. Chuvikov, Research Fellow
K. K. Polunin, Research Fellow

 

National Research Nuclear University MEPhI, Moscow, Russia:
A. V. Tenishev, Associate Professor, Candidate of Technical Sciences, e-mail: avt@onil709.ru

HIGH-TEMPERATURE MATERIALS
ArticleName Structure, crystallographic texture and anisotropy of properties of VZh159 alloy and how they are influenced by regimes of selective laser melting and final heat treatment
ArticleAuthors Rubanov A. E., Isaenkova M. G., Krymskaya O. A., Yudin A. V.
ArticleAuthorsData

National Research Nuclear University MEPhI, Moscow, Russia:

A. E. Rubanov, Postgraduate Student
M. G. Isaenkova, Professor, Doctor of Physics and Mathematics Science, e-mail: MGIsaenkova@mephi.ru
O. A. Krymskaya, Associate Professor, Candidate of Physics and Mathematics Science

 

CNIITMASH Research & Production Association, Moscow, Russia:
A. V. Yudin, Head of Laboratory

FAST-QUENCHED ALLOYS
ArticleName Effect of heat treatment on the properties of rapidly quenched Al – Ge – Si alloys
ArticleAuthors Ivannikov A. A., Abramov A. V., Sevryukov O. N., Suchkov A. N., +Kalin B. A.
ArticleAuthorsData

National Research Nuclear University MEPhI, Moscow, Russia:

A. A. Ivannikov, Associate Rrofessor at the Department of Physical Problems of Materials Science, Candidate of Technical Science, e-mail: AAIvannikov@mephi.ru
A. V. Abramov, Undergraduate Student, e-mail: xxxzx@mail.ru
O. N. Sevryukov, Associate Professor at the Department of Physical Problems of Materials Science, Candidate of Technical Science
A. N. Suchkov, Associate Professor at the Department of Physical Problems of Materials Science, Candidate of Technical Science
+B. A. Kalin (1935–2021)

ArticleName Effect of beryllium on the morphology of initial ingots and the structural phase state of fast-quenched STEMET 1108 brazing alloy ribbons
ArticleAuthors Bachurina D. M., Morokhov P. V., Rasskazov R. S., Sevryukov O. N., +Kalin B. A.
ArticleAuthorsData

National Research Nuclear University MEPhI, Moscow, Russia:

D. M. Bachurina, Postgraduate Student, Engineer, e-mail: dmbachurina@mephi.ru
P. V. Morokhov, Lead Engineer, e-mail: morokhov@mail.ru
R. S. Rasskazov, Undergraduate Student, e-mail: rasskazov_20000@mail.ru
O. N. Sevryukov, Associate Professor, Candidate of Technical Sciences, e-mail: sevr54@mail.ru
+B. A. Kalin (1935–2021)

ArticleName Understanding the structural phase state of bulk amorphous/crystalline alloys obtained from Zr35Ti30Be27,5Cu7,5 powder
ArticleAuthors Suchkov A. N., Bazdnikina E. A., Kazakova V. N., +Kalin B. A., Samokhin A. V.
ArticleAuthorsData

National Research Nuclear University MEPhI, Moscow, Russia:

A. N. Suchkov, Associate Professor, Candidate of Technical Sciences
E. A. Bazdnikina, Engineer, e-mail: eabazdnikina@mail.ru
V. N. Kazakova, Engineer
+B. A. Kalin (1935–2021)

 

Baikov Institute of Metallurgy and Materials Science at the Russian Academy of Sciences, Moscow, Russia:
A. V. Samokhin, Lead Researcher, Candidate of Technical Sciences

FUNCTIONAL MATERIALS
ArticleName Texture formation in biomedical superelastic Ti – Zr – Nb alloys during rolling and subsequent heat treatment
ArticleAuthors Zaripova M. M., Isaenkova M. G., Fesenko V. A., Osintsev A. V.
ArticleAuthorsData

National Research Nuclear University MEPhI, Moscow, Russia:

Zaripova M. M., Postgraduate Student, Engineer, e-mail: MMZaripova@mephi.ru
Isaenkova M. G., Professor, Doctor of Physical and Mathematical Sciences

Fesenko V. A., Lead Engineer
Osintsev A. V., Acting Head of the Department, Candidate of Technical Sciences

ArticleName Synthesis of titanium dioxide nanotubes for the development of betavoltaic cells
ArticleAuthors Bratsuk A. V., Kovtun S. Yu., Bezzhovchiy D. A., Fedorov E. N.
ArticleAuthorsData

Luch Research & Production Association, R&D Institute, Podolsk, Russia:

A. V. Bratsuk, Category 2 Process Engineer, e-mail: AVBratsuk@mail.ru
S. Yu. Kovtun, Process Engineer, e-mail: Semion-Kovtun@yandex.ru
D. A. Bezzhovchiy, Process Engineer, e-mail: DBezzhovchiy@gmail.com
E. N. Fedorov, Principal Researcher, e-mail: FedorovEN@sialuch.ru

Journals →  Tsvetnye Metally →  2022 →  #10