Журналы →  Chernye Metally →  2024 →  №5

Chernye Metally



Mineral Processing
Название Use of xanthan gum as part of a bentonite-polymer binder for pelletizing of iron ore concentrate
Авторы D. A. Vetyugov, T. N. Matveeva
Информация об авторах

Bentonite of Khakassia Ltd., Chernogorsk, Russia1 ; Research Institute of Comprehensive Exploitation of Mineral Resources named after Academician N. V. Melnikov of Russian Academy of Sciences (ICEMR RAS), Moscow, Russia2
D. A. Vetyugov, Mineral Processing Technologist1, Postgraduate Student2, e-mail: vetug7@gmail.com

 

Research Institute of Comprehensive Exploitation of Mineral Resources named after Academician
N. V. Melnikov of Russian Academy of Sciences (ICEMR RAS), Moscow, Russia
T. N. Matveeva, Dr. Eng., Deputy Director for Research, Head of the Dept. of Complex Extraction of Mineral Components from Natural and Technogenic Raw Materials, e-mail: tmatveyeva@mail.ru

Foundry production
Название The cumulative effect of chemical composition and average diameter of sulfides and point oxides on impact strength of 20GL steel car castings
Автор R. A. Bogdanov
Информация об авторе

Bryansk State Technical University, Bryansk, Russia

R. A. Bogdanov, Cand. Eng., Associate Prof., Dept. of Turbine construction, electric and heat power engineering, e-mail: lpim-bra@yandex.ru

60th anniversary of Dept. of Materials Technology of Volgograd State Technical University
Название Research of influence of additional melt pouring in an ingot head on solidification and structure forming via the method of physical (cold) simulation
Авторы S. B. Gamanyuk, D. V. Rutskiy, N. A. Zyuban, M. V. Kirilichev
Информация об авторах

Volgograd State Technical University, Volgograd, Russia

S. B. Gamanyuk, Cand. Eng., Associate Prof., Dept. of Materials Technology, e-mail: gamanuk@mail.ru
D. V. Rutskiy, Cand. Eng., Associate Prof., Head of Dept. of Materials Technology, e-mail: drutskii@vstu.ru
N. A. Zyuban, Dr. Eng., Prof., Dept. of Materials Technology, e-mail: tecmat49@vstu.ru
M. V. Kirilichev, Head of Laboratory, Dept. of Materials Technology, e-mail: tecmat@vstu.ru

Название Causes of low casting ability for continuously cast billets from 08Kh18N10T steel and development of measures directed on increase of casting sequence
Авторы D. V. Rutskiy, A. N. Bozheskov, N. A. Zyuban, A. A. Shuklin
Информация об авторах

Volgograd State Technical University, Volgograd, Russia
D. V. Rutskiy, Cand. Eng., Associate Prof., Head of Dept. of Materials Technology, e-mail: drutskii@vstu.ru
N. A. Zyuban, Dr. Eng., Prof., Dept. of Materials Technology
A. A. Shuklin, Postgraduate Student, Dept. of Materials Technology

JSC “Volzhsky Pipe Plant“, Volzhsky, Russia

A. N. Bozheskov, Chief Engineer, e-mail: vtz@vtz.ru

Название Features of the formation of niobium-rich carbide phases in the melt and their effect on the resistance of high-strength casing pipes to sulfide stress corrosion cracking
Авторы L. V. Palatkina, M. Yu. Chubukov, M. V. Matasova, M. V. Kirilichev
Информация об авторах

Volgograd State Technical University, Volgograd, Russia

L. V. Palatkina, Cand Eng., Associate Prof., Dept. of Materials Technology, e-mail: lv.palatkina@yandex.ru
M. V. Matasova, Magister, Dept. of Materials Technology, e-mail: matasova.mary2016@mail.ru
M. V. Kirilichev, Head of Laboratory, Dept. of Materials Technology, e-mail: tecmat@vstu.ru


JSC “Volzhsky Pipe Plant“, Volzhsky, Russia

M. Yu. Chubukov, Cand. Eng., Head of the Central Plant Laboratory, e-mail: chubukovmu@vtz.ru

Название Features of microsegregation processes and distribution of chemical elements in continuous cast billets from 26KhGMFA steel
Авторы M. V. Kirilichev, N. A. Zyuban, D. V. Rutskiy, M. Yu. Chubukov
Информация об авторах

Volgograd State Technical University, Volgograd, Russia

M. V. Kirilichev, Head of Laboratory, Dept. of Materials Technology, e-mail: tecmat@vstu.ru
N. A. Zyuban, Dr. Eng., Prof., Dept. of Materials Technology, e-mail: tecmat49@vstu.ru
D. V. Rutskiy, Cand. Eng., Associate Prof., Head of Dept. of Materials Technology, e-mail: drutskii@vstu.ru

 

JSC “Volzhsky Pipe Plant“, Volzhsky, Russia
M. Yu. Chubukov, Cand. Eng., Head of the Central Plant Laboratory, e-mail: mikhail.chubukov@tmk-group.com

Название The effect of various types of hot plastic deformation on the structure formation of a pipe billet made from 08Kh18N10T steel
Авторы V. F. Petrova, V. N. Tsutskiridze
Информация об авторах

Volgograd State Technical University, Volgograd, Russia
V. F. Petrova, Cand. Eng., Associate Prof., Dept. of Materials Technology, e-mail: tecmat@vstu.ru
V. N. Tsutskiridze, Student, Dept. of Materials Technology

Название Influence of the value of singular reductions on stress-strain state in deformation area during drawing of steel wire in monolithic dies
Авторы V. F. Danenko, L. M. Gurevich
Информация об авторах

Volgograd State Technical University, Volgograd, Russia
V. F. Danenko, Cand Eng., Associate Prof., Deputy Head of the Dept. of Materials Technology, e-mail: omd@vstu.ru
L. M. Gurevich, Dr. Eng., Prof., Head of the Dept. of Materials Science and Composite Materials

Heating and Heat treatment
Название Thermoelectric effect in the sensors of iron and steel industry
Авторы A. M. Belenkiy, E. E. Dmitrieva, E. A. Khadzaragova, S. I. Chibizova, A. S. Yakovleva
Информация об авторах

North-Caucasian mining and metallurgical institute (State technical university), Vladikavkaz, Russia

A. M. Belenkiy, Dr. Eng., Prof., Dept. of Metallurgy of Non-ferrous Metals and Automation of Metallurgical Processes, e-mail: belenky.bam@yandex.ru

E. A. Khadzaragova, Dr. Eng., Prof., Head of the Dept. of Metallurgy of Non-ferrous Metals and Automation of Metallurgical Processes, e-mail: hadzaragova@mail.ru

 

JSC SPP “Tekhnotsentropribor“, Moscow, Russia
E. E. Dmitrieva, General Director, e-mail: steel@tcpribor.ru

A. S. Yakovleva, Metallurgist Engineer, e-mail: steel@tcpribor.ru

 

University of Science and Technology MISIS, Moscow, Russia
S. I. Chibizova, Cand. Eng., Associate Prof., Dept. of Energy-efficient and Resource-saving Industrial Technologies, e-mail: s_kalimulina@mail.ru

Rolling and other Metal Forming Processes
Название Plastic strip strtetching with non-symmetric conditions in bite areas
Авторы V. A. Kadymov, N. L. Lisunets, E. A. Yanovskaya
Информация об авторах

Russian Technological University “MIREA“, Moscow, Russia

V. A. Kadymov, Dr. Phys.-Math., Prof., Dept. of Higher mathematics and Programming

 

University of Science and Technology MISIS, Moscow, Russia
N. L. Lisunets, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: lisunec@yandex.ru

 

Moscow State Technological University “STANKIN“, Moscow, Russia
E. A. Yanovskaya, Cand. Eng., Associate Prof., Dept. of Applied Mathematics

Название Evaluation of the effect of deformation state parameters and temperature on microstructure of billets from stainless steel in two-high screw rolling
Авторы B. A. Romantsev, M. M. Skripalenko, V. A. Vorotnikov, M. N. Skripalenko
Информация об авторах

University of Science and Technology MISIS, Moscow, Russia
B. A. Romantsev, Dr. Eng., Prof., Dept. of Metal Forming
M. M. Skripalenko, Cand. Eng., Associate Prof., Dept. of Metal Forming
V. A. Vorotnikov, Postgraduate Student, Dept. of Metal Forming
M. N. Skripalenko, Cand. Eng., Associate Prof., Dept. of Metal Forming, Expert of the Scientific Project, e-mail: tfsmn@yandex.ru

Журналы →  Chernye Metally →  2024 →  №5