Journals →  CIS Iron and Steel Review →  2024 →  #1

CIS Iron and Steel Review



Preparation of Raw Materials
ArticleName Analysis of the technique for experimental determination of the efficient heat transfer coefficient during drying of iron ore pellets and charge in the dense layer
ArticleAuthors V. I. Bobkov, M. I. Dli, V. A. Orekhov, N. S. Kulyasov
ArticleAuthorsData

Smolensk Branch of the National Research University “Moscow Power Engineering Institute” (Smolensk, Russia)

V. I. Bobkov, Dr. Eng., Associate Prof., Head of the Dept. of Higher Mathematics, e-mail: vovabobkoff@mail.ru
M. I. Dli, Dr. Eng., Prof., Head of the Dept. of Information Technologies in Economics and Management, e-mail: midli@mail.ru
V. A. Orekhov, Assistant, e-mail: fundukoff@mail.ru

 

Plekhanov Russian University of Economics (Moscow, Russia)
N. S. Kulyasov, Cand. Econ., Leading Researcher, Scientific and Methodological Center “Higher School of Tariff Regulation”

Ferroalloys
ArticleName On the problem of processing of manganese wastes from ore beneficiation: preparation of a single-component charge for ferromanganese melting
ArticleAuthors N. K. Dosmukhamedov, E. E. Zholdasbay, E. B. Tazhiev, A. A. Argyn
ArticleAuthorsData

Satbaev University (Almaty, Kazakhstan)

N. K. Dosmukhamedov, Cand. Eng., Prof., e-mail: nurdos@bk.ru
E. E. Zholdasbay, Ph. D.
E. B. Tazhiev, Ph. D., Senior Lecturer, e-mail: eleusiz_t1990@mail.ru (Corresponding author)
A. A. Argyn, Ph. D.

ArticleName Smelting of high-carbon ferrochromium from pre-reduced chromite raw materials
ArticleAuthors E. Zh. Shabanov, Zh. K. Saulebek, A. S. Akhmetov, G. K. Mukhtarkhanova
ArticleAuthorsData

Zh. Abishev Chemical and Metallurgical Institute (Karaganda, Kazakhstan)

E. Zh. Shabanov, PhD, Associate Professor, Leading Researcher, Laboratory of Ferroalloys and Reduction Processes, e-mail: ye.shabanov@gmail.com
Zh. K. Saulebek, Master Eng., Junior Researcher, Laboratory of Ferroalloys and Reduction Processes, e-mail: zhalgas.saulebek@bk.ru
A. S. Akhmetov, PhD, Senior Researcher, Laboratory of Ferroalloys and Reduction Processes, e-mail: aman1aotero@gmail.com

 

Research Center “INNTECH” LLP (Karaganda, Kazakhstan)
G. K. Mukhtarkhanova, Head of the Laboratory, e-mail: 32bmifr@mail.ru

Refractories
ArticleName Mechanism of MgO–C refractories corrosion interacting with CaO–MgO–Al2O3–SiO2–FeO slags
ArticleAuthors I. A. Krasnyanskaya, K. N. Anisimov, M. P. Gusev, M. G. Moshchenko, D. V. Karavaev
ArticleAuthorsData

I. P. Bardin Central Research Institute of Ferrous Metallurgy (Moscow, Russia)

I. A. Krasnyanskaya*, Cand. Eng., Head of the Laboratory of Complex Chemical Researches, N. P. Lyakishev Scientific Center for Complex Processing of Raw Materials, iakrsn@gmail.com
K. N. Anisimov, Cand. Eng., Head of the Laboratory of Refractory Materials

 

LLC “Cyberphysics” (Moscow, Russia)
M. P. Gusev, Cand. Eng., Chief Business Development Officer

 

PAO NLMK (Lipetsk, Russia)
M. G. Moshchenko, Cand. Eng., Head of the Programs, Directorate of Researches and Developments
D. V. Karavaev, Engineer, Directorate of Researches and Developments

* Corresponding author


A. I. Volkov took part in the work

Casting
ArticleName Increase of resistance of steel moulds using the complex modifier INSTEEL-7
ArticleAuthors V. A. Korovin, I. O. Leushin, I. P. Balabanov, I. A. Savin
ArticleAuthorsData

Nizhniy Novgorod State Technical University (Nizhniy Novgorod, Russia)

V. A. Korovin, Dr. Eng., Prof., Dept. “Metallurgical Technologies and Equipment”, e-mail: v.korovin2015@yandex.ru
I. O. Leushin, Dr. Eng., Prof., Dept. “Metallurgical Technologies and Equipment”, e-mail: igoleu@yandex.ru


Kazan National Research Technical University named after A.N. Tupolev – KAI (Kazan, Russia)1Kazan Federal University (Kazan, Russia)2

I. P. Balabanov, Cand. Eng., Associate Prof., Dept. “Automation and Management”; Associate Prof., Dept. “Design
and Technology for Machine-building industries” 1,2, e-mail: balabanovip@mail.ru

 

Kazan National Research Technical University named after A.N. Tupolev – KAI (Kazan, Russia)
I. A. Savin, Cand. Eng., Associate Prof., Head of Dept. “Design and Technology for Machinebuilding industries”, e-mail: savin.ia@kaichelny.ru

Rolling
ArticleName Review of scientific-applied research and industrial application of radial shear rolling technology
ArticleAuthors S. P. Galkin, T. Yu. Kin, Yu. V. Gamin, A. S. Aleshchenko, B. V. Karpov
ArticleAuthorsData

National University of Science and Technology «MISIS» (Moscow, Russia)1 ; JSC “Istok ML” (Moscow, Russia)2

S. P. Galkin, Dr. Eng., Prof., Dept. of Metal Forming1,2, e-mail: glk-omd@yandex.ru

Yu. V. Gamin, Cand. Eng., Associate Prof., Dept. of Metal Forming1,2, e-mail: y.gamin@mail.ru

A. S. Aleshchenko, Cand. Eng., Associate Prof., Head of Dept. of Metal Forming1,2, e-mail: judger85@mail.ru

 

National University of Science and Technology «MISIS» (Moscow, Russia)
T. Yu. Kin, Leading Engineer, Postgraduate Student, Dept. of Metal Forming, e-mail: tatianakin@mail.ru

 

Research and Development Center “OMD” (Moscow, Russia)
B. V. Karpov, Head of Research and Development Center “OMD”, e-mail: karpov.bv@misis.ru

ArticleName Evaluation of steel grade effects on stress-strain behavior of joint connectors: a finite element approach
ArticleAuthors M. V. Lukin, A. A. Strekalkin, V. B. Deev, S. I. Roshchina
ArticleAuthorsData

Vladimir State University named after A. G. and N. G. Stoletovs (Vladimir, Russia)

M. V. Lukin, Cand. Eng., Associate Prof., e-mail: lukin_mihail_22@mail.ru
A. A. Strekalkin, Cand. Eng., Associate Prof., e-mail: a.a.strekalkin@gmail.com

S. I. Roshchina, Dr. Eng., Prof., Head of Building Structures Dept., e-mail: rsi3@mail.ru


Vladimir State University named after A. G. and N. G. Stoletovs (Vladimir, Russia)1 ; Wuhan Textile University (Wuhan, China)2 ; National University of Science and Technology “MISIS” (Moscow, Russia)3
V. B. Deev, Dr. Eng., Prof., Chief Scientific Researcher1, Professor-expert of the School of Mechanical Engineering and Automation2, Dept. of Metal Forming3, e-mail: deev.vb@mail.ru

Tubemaking
ArticleName Detection of optimal parameters of steel sheet billet forming process while bending on PBT 25 three-roller machine
ArticleAuthors M. N. Skripalenko, G. P. Zhigulev, V. A. Fadeev, M. M. Skripalenko
ArticleAuthorsData

National University of Science and Technology “MISIS” (Moscow, Russia)

M. N. Skripalenko, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: tfsmn@yandex.ru
V. A. Fadeev, Associate Prof., Dept. of Metal Forming, e-mail: fdv_viktor@mail.ru
M. M. Skripalenko, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: mms@misis.ru

“DKN-T” JSC (Moscow, Russia)

G. P. Zhigulev, Cand. Eng., Associate Prof., e-mail: aldebaran2000@mail.ru

Heat Treatment and Metal Science
ArticleName Using of thermal cycling to improve the strength properties of steel
ArticleAuthors V. B. Kuskov, E. S. Iliin
ArticleAuthorsData

Empress Catherine II Saint Petersburg Mining University (Saint Petersburg, Russia)

V. B. Kuskov, Cand. Eng., Associate Prof., Dept. of Mineral Processing, e-mail: Kuskov_VB@pers.spmi.ru
E. S. Iliin, Ph. D. Student, Dept. of Mineral Processing, e-mail: s235069@stud.spmi.ru

Metal Science and Metal Physics
ArticleName Investigation and modelling of the microstructure evolution during hot deformation of novel Fe–30Mn–10Al–3Si–1C with an elevated specific strength
ArticleAuthors A. A. Kazakova, A. V. Pozdnyakov, V. V. Cheverikin, A. Yu. Churyumov
ArticleAuthorsData

National University of Science and Technology “MISIS” (Moscow, Russia)

A. A. Kazakova, Master Student, Dept. of Physical Metallurgy of Non-ferrous Metals
A. V. Pozdnyakov, Ph. D., Associate Prof., Dept. of Physical Metallurgy of Non-ferrous Metals
V. V. Cheverikin, Ph. D., Leading Researcher, Dept. of Physical Metallurgy of Non-ferrous Metals
A. Yu. Churyumov, Ph. D., Associate Prof., Dept. of Physical Metallurgy of Non-ferrous Metals, e-mail: churyumov@misis.ru

ArticleName Viscoplastic properties of chromium-nickel steel in short-term creep under constant stress. Part 1
ArticleAuthors A. Yu. Kuzkin, D. A. Zadkov, V. Yu. Skeeba, V. V. Kukartsev, Ya. A. Tynchenko
ArticleAuthorsData

Empress Catherine II Saint Petersburg Mining University (Saint Petersburg, Russia)

A. Yu. Kuzkin*, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, e-mail: Kuzkin_AYu@pers.spmi.ru
D. A. Zadkov, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, e-mail: Zadkov_DA@pers.spmi.ru


Novosibirsk State Technical University (Novosibirsk, Russia)

V. Yu. Skeeba, Cand. Eng., Associate Prof., Dept. of Industrial Machinery Design, e-mail: skeeba_vadim@mail.ru


Reshetnev Siberian State University of Science and Technology (Krasnoyarsk, Russia)1Siberian Federal University (Krasnoyarsk, Russia)2Bauman Moscow State Technical University (Moscow, Russia)3

V. V. Kukartsev, Cand. Eng., Associate Prof., Dept. of Information Economic Systems, Institute of Engineering and Economics1, Dept. of Software Engineering, Institute of Space and Information Technologies2, Artificial Intelligence Technology Scientific and Education Center3, e-mail: vlad_saa_2000@mail.ru


Siberian Federal University (Krasnoyarsk, Russia)1Bauman Moscow State Technical University (Moscow, Russia)2

Ya. A. Tynchenko, Junior Researcher, Lab. of Biofuel Compositions1, Artificial Intelligence Technology Scientific and Education Center2, e-mail: t080801@yandex.ru


* Corresponding author

ArticleName The method of quantitative assessment of galaxite dissociation degree in the oxide MnO–Al2O3 melt based on the Bjerrum-Guggenheim coefficient concept
ArticleAuthors G. S. Yerekeeva, G. I. Narikbaeva, I. Ya. Korsukova, F. R. Kapsalamova
ArticleAuthorsData

Chemical and Metallurgical Institute named after Zh. Abishev (Karaganda, Kazakhstan)

G. S. Yerekeeva, Postgraduate Student, Junior Researcher, “Metallurgy of Steel and material Science” laboratory, e-mail: yerekeyeva.g@mail.ru
G. I. Narikbaeva, Scientific Researcher, “Metallurgical melts” laboratory
I. Ya. Korsukova, Scientific Researcher, “Metallurgical melts” laboratory

 

National Center on Complex Processing of Mineral Raw Materials of the Republic of Kazakhstan (Almaty, Kazakhstan)
F. R. Kapsalamova, Senior Researcher

ArticleName Investigation of properties of laminar antiferromagnetic nanostructures
ArticleAuthors B. V. Malozyomov, V. S. Tynchenko, V. A. Kukartsev, K. A. Bashmur, T. A. Panfilova
ArticleAuthorsData

Novosibirsk State Technical University (Novosibirsk, Russia)

B. V. Malozyomov*, Cand. Eng., Associate Prof., e-mail: malozyomov@corp.nstu.ru


Reshetnev Siberian State University of Science and Technology (Krasnoyarsk, Russia)1 ; Siberian Federal University (Krasnoyarsk, Russia)2 ; Bauman Moscow State Technical University (Moscow, Russia)3

V. S. Tynchenko*, Cand. Eng., Associate Prof.1,2,3, e-mail: vadimond@mail.ru


Siberian Federal University (Krasnoyarsk, Russia)

V. A. Kukartsev, Cand. Eng., Associate Prof., Polytechnic Institute, e-mail: vkukarstev@sfu-kras.ru
K. A. Bashmur, Senior Lecturer, e-mail: bashmur@bk.ru
T. A. Panfilova, Cand. Eng., Associate Prof., e-mail: tpanfilova@sfu-kras.ru

 

*Corresponding author

Additive Technologies
ArticleName Porosity reduction in metal with hybrid wire and arc additive manufacturing technology (WAAM)
ArticleAuthors A. I. Karlina, V. V. Kondratyev, A. E. Balanovskiy, N. A. Astafyeva, E. A. Yamshchikova
ArticleAuthorsData

Moscow State University of Civil Engineering (Moscow, Russia)

A. I. Karlina, Cand. Eng., Scientific Researcher, e-mail: karlinat@mail.ru

 

A. P. Vinogradov Institute of Geochemistry of the Siberian Branch of the Russian Academy of Sciences (Irkutsk, Russia)

V. V. Kondratyev, Cand. Eng., Senior Scientific Researcher

 

Irkutsk National Research Technical University (Irkutsk, Russia)
A. E. Balanovskiy, Cand. Eng., Associate Prof., Head of the Dept. of Material Science, Welding and Additive Technologies
N. A. Astafyeva, Cand. Eng., Associate Prof.
E. A. Yamshchikova, Postgraduate Student

Coating Application and Corrosion Protection
ArticleName Identification and localization of pitting corrosion on metallic surface using deep learning
ArticleAuthors N. V. Krysko, N. A. Shchipakov, D. M. Kozlov, A. G. Kusyy
ArticleAuthorsData

Bauman Moscow State Technical University (Moscow, Russia)

N. V. Krysko, Cand. Eng., Associate Prof., Dept. MT-7 “Welding Tehnology and Diagnostics”, e-mail: kryskonv@bmstu.ru
N. A. Shchipakov, Cand. Eng., Associate Prof., Dept. MT-7 “Welding Tehnology and Diagnostics”, e-mail: shchipak@bmstu.ru
D. M. Kozlov, Cand. Eng., Engineer, e-mail: kozlovdm@bmstu.ru
A. G. Kusyy, Engineer, e-mail: kusyy@bmstu.ru

Laser Technologies
ArticleName Experimental study of the process of laser treatment of steel Kh12M
ArticleAuthors N. A. Chichenev, S. M. Gorbatyuk, A. O. Karfidov, O. N. Chicheneva
ArticleAuthorsData

National University of Science and Technology “MISIS” (Moscow, Russia)

N. A. Chichenev, Dr. Eng., Prof., Dept. of Engineering Technology Equipment, e-mail: chich38@mail.ru
S. M. Gorbatyuk, Dr. Eng., Prof., Dept. of Engineering Technology Equipment, e-mail: sgor02@mail.ru
A. O. Karfidov, Head of Dept. of Engineering Technology Equipment, e-mail: a.korf@mail.ru
O. N. Chicheneva, Cand. Eng., Associate Prof., Dept. of Engineering Technology Equipment, e-mail: ch-grafika@mail.ru

Machine-building Technologies
ArticleName Calculation of the maximum functional clearance of a cylindrical joint between a steel shaft and a cast iron sprocket
ArticleAuthors O. A. Leonov, N. Zh. Shkaruba, Yu. G. Vergazova
ArticleAuthorsData

Russian State Agrarian University – Moscow Timiryazev Agricultural Academy (Moscow, Russia)

O. A. Leonov, Dr. Eng., Prof., e-mail: oaleonov@rgau-msha.ru
N. Zh. Shkaruba, Dr. Eng., Prof., e-mail: shkaruba@rgau-msha.ru
Yu. G. Vergazova, Cand. Eng., Associate Prof., e-mail: vergazova@rgau-msha.ru

Ecology and Recycling
ArticleName Recycling of red mud in iron-containing catalyst for oxidizing organic impurities in waste water
ArticleAuthors T. V. Konkova, A. M. Gaydukova, E. Yu. Liberman, A. A. Seitkasymova
ArticleAuthorsData

Mendeleev University of Chemical Technology (Moscow, Russia)

T. V. Konkova, Dr. Eng., Prof., Dept. “Technology of inorganic substances and electrochemical processes”, e-mail: kontat@list.ru
A. M. Gaydukova, Cand. Eng., Associate Prof., Dept. “Technology of inorganic substances and electrochemical processes”, e-mail: GaydukovaAM@yandex.ru
E. Yu. Liberman, Dr. Chem., Prof., Dept. “Technology of inorganic substances and electrochemical processes”, e-mail: el-liberman@mail.ru
A. A. Seitkasymova, Postgraduate Student, Dept. “Technology of inorganic substances and electrochemical processes», e-mail: seitkassymovaa@gmail.com

Journals →  CIS Iron and Steel Review →  2024 →  #1