Chernye Metally
Ural State Mining University, Ekaterinburg, Russia
A. E. Pelevin, Dr. Eng., Prof., Associate Prof., Dept. of Mineral Processing, e-mail: a-pelevin@yandex.ru
Empress Catherine II Saint Petersburg Mining University, St. Petersburg, Russia
A. B. Lebedev, Cand. Eng., Researcher, Research Center “Resource Processing”, e-mail: 2799957@mail.ru
Kh. Ya. Martines, Postgraduate Student, Dept. of Industrial Economics, e-mail: s233201@stud.spmi.ru
D. A. Balandinsky, Postgraduate Student, Dept. of Chemical Technologies and Energy Processing, e-mail: s235031@stud.spmi.ru
Empress Catherine II Saint Petersburg Mining University, St. Petersburg, Russia1 ; Maximo Gomez Baez University, Ciego de Avila, Cuba2
H. L. Noah, Postgraduate Student, Depot. of Hydrogeology and Engineering Geology1, Assistant, Dept. of Hydraulic Engineering2, e-mail: s233146@stud.spmi.ru
South Ural State University (NRU), Chelyabinsk, Russia
K. I. Smirnov, Rresearcher, Laboratory of Hydrogen Technologies in Metallurgy
P. A. Gamov, Cand. Eng., Associate Prof., Acting Head of the Laboratory of Hydrogen Technologies in Metallurgy
V. S. Samolin, Postgraduate Student, Dept. of Pyrometallurgical and Foundry Technologies
V. E. Roshchin, Dr. Eng., Prof., Chief Rsearcher, Laboratory of Hydrogen Technologies in Metallurgy, e-mail: roshchinve@susu.ru
Novotroitsk branch of the National University of Science and Technology MISIS, Novotroitsk, Russia
E. V. Zhenin, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, e-mail: zhenin.ev@misis.ru
A. N. Shapovalov, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, e-mail: alshapo@misis.ru
Yaroslavl State Technical University, Yaroslavl, Russia.
V. A. Ivanova, Dr. Eng., Associate Prof., Director of the Institute of Engineering and Machinery Manufacturing, e-mail: ivanovava@ystu.ru
Naberezhnye Chelny Institute, Kazan (Volga Region) Federal University, Naberezhnye Chelny, Russia
A. G. Panov, Dr. Eng., Prof., e-mail: panov.ag@mail.ru
National University of Science and Technology MISIS, Moscow, Russia
P. I. Chernousov, Cand. Eng., Aassociate Prof., Dept. of Energy Efficient and Resource Saving Industrial Technologies, e-mail: p.chernou@yandex.ru
O. V. Golubev, Cand. Eng., Aassociate Prof., Dept. of Energy Efficient and Resource Saving Industrial Technologies, e-mail: olega-san@yandex.ru
A. N. Uzunova, Postgraduate Student, Dept. of Energy Efficient and Resource Saving Industrial Technologies, e-mail: miss.chikaleva@gmail.com
Novolipetsk Metallurgical Plant, Lipetsk, Russia
S. V. Myasoedov, Head of the Blast Furnace Shop, e-mail: myasoedov_sv@nlmk.com
National University of Science and Technology MISIS, Moscow, Russia
P. I. Chernousov, Cand. Eng., Aassociate Prof., Dept. of Energy Efficient and Resource Saving Industrial Technologies, e-mail: p.chernou@yandex.ru
O. V. Golubev, Cand. Eng., Aassociate Prof., Dept. of Energy Efficient and Resource Saving Industrial Technologies, e-mail: olega-san@yandex.ru
L. I. Lopachevskaya, Postgraduate Student, Dept. of Energy Efficient and Resource Saving Industrial Technologies, e-mail: lilya2599@gmail.com
M. V. Slonov, Postgraduate Student, Dept. of Energy Efficient and Resource Saving Industrial Technologies, e-mail: magaslonov@mail.ru
Lipetsk State Technical University, Lipetsk, Russia
K. S. Gorbunov, Postgraduate Student, Dept. of Metal Forming, e-mail: beluivolk96@mail.ru
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia
L. V. Nosov, Postgraduate Student, Dept. of Materials Processing Technologies, e-mail: nosov.leopold@yandex.ru
I. P. Mazur, Dr. Eng., Prof., Dept. of Metal Forming, e-mail: mazur_ip@mail.ru
Moscow Aviation Institute (National Research University), Moscow, Russia
I. S. Belashova, Dr. Eng., Prof., Dept. 903
Moscow Automobile and Road Construction State Technical University (MADI), Moscow, Russia
L. G. Petrova, Dr. Eng., Prof., Head of the Dept. of Technology of Structural Materials
Vyatka State University, Kirov, Russia
E. A. Marinin, Cand. Eng., Associate Prof., Dept. of Information Technologies in Mechanical Engineering, e-mail: e.marrini@gmail.com
SPE NITRID, Saratov, Russia
P. S. Bibikov, Leading Engineer, Cand. Eng.
Nizhny Novgorod State Technical University named after. R. E. Alekseev (NNSTU), Nizhny Novgorod, Russia
M. S. Anosov, Cand. Eng., Associate Prof., Dept. of Technology and Equipment of Mechanical Engineering, e-mail: anosov.ms@nntu.ru
M. A. Chernigin, Engineer, Dept. of Technology and Equipment of Mechanical Engineering, e-mail: honeybadger52@yandex.ru
Yu. S. Mordovina, Educational Process Engineer at the Institute of Professional Retraining, e-mail: ips4@nntu.ru
E. S. Anosova, Assistant, Dept. of Machine Automation, e-mail: katena.zav@mail.ru
Siberian State Industrial University, Novokuznetsk, Russia
R. E. Kryukov, Dr. Eng., Associate Prof., Prof., Dept. of Metallurgy of Ferrous Metals and Chemical Technology, e-mail: rek_nzrmk@mail.ru
A. R. Mikhno, Postgraduate Student, Director of the Scientific and Production Center “Welding Processes and Technologies”, e-mail: mikno-mm131@mail.ru
I. A. Panchenko, Cand. Eng., Senior Researcher, Dept. of Scientific Research, e-mail: i.r.i.ss@yandex.ru
S. V. Konovalov, Dr. Eng., Prof., Vice-Rector for Scientific and Innovation Activities, e-mail: konovalov@sibsiu.ru
Almalyk branch of the National University of Science and Technology MISIS, Almalyk, Uzbekistan
E. S. Nabiev, Cand. Eng., Associate Prof., Dept. of Metallurgy, e-mail: nes.2406@mail.ru
A. A. Fatkhullin, Senior Lecturer, Dept. of Metallurgy
Sh. M. Khudoyberdiev, Cand. Eng., Associate Prof., Dept. of Mining Engineering
Moscow Polytechnic University, Moscow, Russia
S. A. Tipalin, Cand. Eng., Prof., Dept. of Metalworking and Additive Technologies (OMD&AT), e-mail: tsa_mami@mail.ru
B. Y. Saprykin, Senior Lecturer, Dept. of OMD&AT, e-mail: saprykin-boris@mail.ru
N. D. Borisov, Postgraduate Student, Dept. of OMD&AT, e-mail: nicbor1998@gmail.com