Chernye Metally
| Mineral processing | |
| ArticleName | Possibility of using wet magnetic separation for pre-enrichment of finely crushed magnetite ore |
| ArticleAuthor | A. E. Pelevin |
| ArticleAuthorData | Ural State Mining University, Ekaterinburg, Russia A. E. Pelevin, Dr. Eng., Prof., Associate Prof., Dept. of Mineral Processing, e-mail: a-pelevin@yandex.ru |
| Preparation of raw materials | |
| ArticleName | The influence of a mixture of nepheline, red mud and calcinated coke on the strength of iron ore pellets |
| ArticleAuthors | A. B. Lebedev, H. L. Noah, Kh. Ya. Martines, D. A. Balandinsky |
| ArticleAuthorsData | Empress Catherine II Saint Petersburg Mining University, St. Petersburg, Russia A. B. Lebedev, Cand. Eng., Researcher, Research Center “Resource Processing”, e-mail: 2799957@mail.ru Kh. Ya. Martines, Postgraduate Student, Dept. of Industrial Economics, e-mail: s233201@stud.spmi.ru
Empress Catherine II Saint Petersburg Mining University, St. Petersburg, Russia1 ; Maximo Gomez Baez University, Ciego de Avila, Cuba2 |
| Iron reduction | |
| ArticleName | Selective reduction of iron from ilmenite concentrate |
| ArticleAuthors | K. I. Smirnov, P. A. Gamov, V. S. Samolin, V. E. Roshchin |
| ArticleAuthorsData | South Ural State University (NRU), Chelyabinsk, Russia K. I. Smirnov, Rresearcher, Laboratory of Hydrogen Technologies in Metallurgy |
| Sintering | |
| ArticleName | Influence of water temperature on results of pelletizing, sintering process indicators and sinter quality |
| ArticleAuthors | E. V. Zhenin, A. N. Shapovalov |
| ArticleAuthorsData | Novotroitsk branch of the National University of Science and Technology MISIS, Novotroitsk, Russia |
| Ironmaking | |
| ArticleName | Analysis of methods for determination of cast iron hardness based on assessment of measurement accuracy |
| ArticleAuthors | V. A. Ivanova, A. G. Panov |
| ArticleAuthorsData | Yaroslavl State Technical University, Yaroslavl, Russia. V. A. Ivanova, Dr. Eng., Associate Prof., Director of the Institute of Engineering and Machinery Manufacturing, e-mail: ivanovava@ystu.ru Naberezhnye Chelny Institute, Kazan (Volga Region) Federal University, Naberezhnye Chelny, Russia |
| ArticleName | Study of the influence of blast humidity on the reduction processes performance in blast furnace smelting |
| ArticleAuthors | P. I. Chernousov, O. V. Golubev, S. V. Myasoedov, A. N. Uzunova |
| ArticleAuthorsData | National University of Science and Technology MISIS, Moscow, Russia A. N. Uzunova, Postgraduate Student, Dept. of Energy Efficient and Resource Saving Industrial Technologies, e-mail: miss.chikaleva@gmail.com
Novolipetsk Metallurgical Plant, Lipetsk, Russia |
| ArticleName | Study of the microimpurity elements behavior in blast furnace smelting |
| ArticleAuthors | P. I. Chernousov, O. V. Golubev, L. I. Lopachevskaya, M. V. Slonov |
| ArticleAuthorsData | National University of Science and Technology MISIS, Moscow, Russia |
| Rolling and other Metal forming processes | |
| ArticleName | Study of the influence of asymmetry on cold rolling energy-power parameters |
| ArticleAuthors | K. S. Gorbunov, L. V. Nosov, I. P. Mazur |
| ArticleAuthorsData | Lipetsk State Technical University, Lipetsk, Russia K. S. Gorbunov, Postgraduate Student, Dept. of Metal Forming, e-mail: beluivolk96@mail.ru
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia |
| Metal science and Heat treatment | |
| ArticleName | Influence of cyclic nitriding modes in ammonia-air atmospheres on the phase composition of diffusion layer in the martensitic steel |
| ArticleAuthors | I. S. Belashova, L. G. Petrova, E. A. Marinin, P. S. Bibikov |
| ArticleAuthorsData | Moscow Aviation Institute (National Research University), Moscow, Russia I. S. Belashova, Dr. Eng., Prof., Dept. 903
Moscow Automobile and Road Construction State Technical University (MADI), Moscow, Russia L. G. Petrova, Dr. Eng., Prof., Head of the Dept. of Technology of Structural Materials
Vyatka State University, Kirov, Russia
SPE NITRID, Saratov, Russia |
| ArticleName | Structure and properties of 08KhMFA and 30KhGSA steels obtained by electric arc welding |
| ArticleAuthors | M. S. Anosov, M. A. Chernigin, Yu. S. Mordovina, E. S. Anosova |
| ArticleAuthorsData | Nizhny Novgorod State Technical University named after. R. E. Alekseev (NNSTU), Nizhny Novgorod, Russia M. S. Anosov, Cand. Eng., Associate Prof., Dept. of Technology and Equipment of Mechanical Engineering, e-mail: anosov.ms@nntu.ru |
| Welding and Surfacing | |
| ArticleName | Study of the structure and properties of the alloy produced by arc surfacing with high-entropy flux-cored wire of the Al – Co – Cr – Fe – Mn system |
| ArticleAuthors | R. E. Kryukov, A. R. Mikhno, I. A. Panchenko, S. V. Konovalov |
| ArticleAuthorsData | Siberian State Industrial University, Novokuznetsk, Russia R. E. Kryukov, Dr. Eng., Associate Prof., Prof., Dept. of Metallurgy of Ferrous Metals and Chemical Technology, e-mail: rek_nzrmk@mail.ru |
| ArticleName | Preliminary study of the possibility of using multi-electrode electroslag cladding for manufacture of bimetallic crusher beaters |
| ArticleAuthors | E. S. Nabiev, A. A. Fatkhullin, Sh. M. Khudoyberdiev |
| ArticleAuthorsData | Almalyk branch of the National University of Science and Technology MISIS, Almalyk, Uzbekistan |
| Machine-building technologies | |
| ArticleName | Bending of steel multilayer sheet material |
| ArticleAuthors | S. A. Tipalin, B. Yu. Saprykin, N. D. Borisov |
| ArticleAuthorsData | Moscow Polytechnic University, Moscow, Russia S. A. Tipalin, Cand. Eng., Prof., Dept. of Metalworking and Additive Technologies (OMD&AT), e-mail: tsa_mami@mail.ru |
