CIS Iron and Steel Review

Preparation of Raw Materials
ArticleName	Experimental research of the regularities of iron-bearing ore desulfurization for the temperature conditions of liquid phase sintering
ArticleAuthors	M. I. Dli, V. A. Bobkov, A. A. Bykov, N. S. Kulyasov
ArticleAuthorsData	Smolensk Branch of the National Research University “Moscow Power Engineering Institute” (Smolensk, Russia) M. I. Dli, Dr. Eng., Prof., Head of the Dept. of Information Technologies in Economics and Management, e-mail: midli@mail.ru V. A. Bobkov, Dr. Eng., Associate Prof., Head of the Dept. of Higher Mathematics, e-mail: vovabobkoff@mail.ru A. A. Bykov, Cand. Ped., Associate Prof., Head of the Dept. of Physics, e-mail: alex1by@mail.ru HSE University (Moscow, Russia) N. S. Kulyasov, Cand. Econ., Research Fellow, Laboratory for Economics of Climate Change, e-mail: nkulyasov@hse.ru
Sintering
ArticleName	Pelletizing of ferruginous quartzites with red mud addition and heat treatment of obtained pellets in carbon monoxide atmosphere
ArticleAuthor	A. B. Lebedev
ArticleAuthorData	Empress Catherine II Saint Petersburg Mining University (St. Petersburg, Russia) A. B. Lebedev, Cand. Eng., Researcher, Scientific Center “Problems of processing of mineral and technogenic resources”, e-mail: 2799957@mail.ru
Ironmaking
ArticleName	The influence of parameters of slag conditions on blast furnace smelting performance and cast iron quality
ArticleAuthors	A. N. Shapovalov, R. R. Dema, R. N. Amirov, O. R. Latypov
ArticleAuthorsData	National University of Science and Technology MISIS, Novotroitsk Affiliate (Novotroitsk, Russia) A. N. Shapovalov, Cand. Eng., Associate Prof., Deputy Director on Innovations and Development, e-mail: alshapo@yandex.ru National University of Science and Technology MISIS, Novotroitsk Affiliate (Novotroitsk, Russia)¹ ; Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia)² R. R. Dema, Dr. Eng., Associate Prof., Dept. of Machines and Technologies for Metal Processing and Machine-Building², Prof., Dept. of Metallurgical Technologies and Equipment¹, e-mail: demarr78@mail.ru Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia) R. N. Amirov, Cand. Eng., Associate Prof., Dept. of Machines and Technologies for Metal Processing and Machine-Building O. R. Latypov, Cand. Eng., Associate Prof., Dept. of Machines and Technologies for Metal Processing and Machine-Building, e-mail: latolegraf@list.ru
Ferroalloys
ArticleName	The use of ferroalloys for the smelting of a quasi-high-entropy alloy
ArticleAuthors	Sv. S. Kvon, A. Z. Isagulov, V. Yu. Kulikov, S. K. Arinova
ArticleAuthorsData	Karaganda Technical University (Karaganda, Kazakhstan) Sv. S. Kvon, Cand. Eng., Prof., e-mail: svetlana.1311@mail.ru A. Z. Isagulov, Dr. Eng., Prof., e-mail: isagulov_aristotel@mail.ru V. Yu. Kulikov, Cand. Eng., Prof., e-mail: mlpikm@mail.ru S. K. Arinova, Ph. D., Lecturer, e-mail: sanya_kazah@mail.ru
ArticleName	Thermally coupled combustion synthesis of composite ferroalloys
ArticleAuthor	M. Kh. Ziatdinov
ArticleAuthorData	Tomsk State University (Tomsk, Russia) M. Kh. Ziatdinov, Dr. Eng., Senior Researcher, e-mail: ziatdinovm@mail.ru
Casting and Foundry
ArticleName	On validity of the value of tensile strength of dry moulding and core mixtures
ArticleAuthors	L. M. Gurevich, N. A. Kidalov, I. N. Zakharov, A. S. Adamova
ArticleAuthorsData	Volgograd State Technical University (Volgograd, Russia) L. M. Gurevich, Dr. Eng., Prof., Head of the Dept. “Metal Science and Composite Materials”, e-mail: leongur@mail.ru N. A. Kidalov, Dr. Eng., Prof., Head of the Dept. “Machines and Technology of Casting Production”, e-mail: kola-neka@rambler.ru I. N. Zakharov, Dr. Eng., Associate Prof., Head of the Dept. “Strength of Materials”, e-mail: zaxap@mail.ru A. S. Adamova, Cand. Eng., Associate Prof., Dept. “Machines and Technology of Casting Production”, e-mail: adamova@vstu.ru
Rolling
ArticleName	Low carbon steel CCT diagram prediction using machine learning
ArticleAuthors	A. G. Zinyagin, D. A. Brayko, A. V. Muntin, P. Yu. Zhikharev
ArticleAuthorsData	Bauman Moscow State Technical University (Moscow, Russia) A. G. Zinyagin, Cand. Eng., Associate Prof., e-mail: ziniagin_ag@bmstu.ru D. A. Brayko, Postgraduate Student, e-mail: brayko@bmstu.ru A. V. Muntin, Cand. Eng., Associate Prof., e-mail: muntin_av@bmstu.ru P. Yu. Zhikharev, Senior Lecturer, e-mail: zhikharev@bmstu.ru
Heat Treatment
ArticleName	Optimization of heat treatment process for cast steel 50SL
ArticleAuthors	E. A. Pismennyi, A. M. Markov, A. I. Augstkaln, V. B. Deev
ArticleAuthorsData	Polzunov Altai State Technical University (Barnaul, Russia) E. A. Pismennyi, Postgraduate Student of the Dept. “Engineering Technology”, e-mail: pismennyi.eug@mail.ru A. M. Markov, Dr. Eng., Prof., Rector, Dept. “Engineering Technology”, e-mail: andmarkov@inbox.ru A. I. Augstkaln, Postgraduate Student of the Dept. of Physics, Assistant of the Dept. of Mechanical Engineering Technologies and Equipment, e-mail: Augstkaln-a@yandex.ru Wuhan Textile University (Wuhan, China)¹ ; Vladimir State University named after Alexander and Nikolay Stoletovs (Vladimir, Russia)² ; National University of Science and Technology MISIS (Moscow, Russia)³ V. B. Deev^, Dr. Eng., Prof., School of Mechanical Engineering and Automation¹, Chief Researcher², Prof. of the Dept. of Metal Forming³, e-mail: deev.vb@mail.ru* ^*Corresponding author
ArticleName	Evaluation of possibility of using polysiloxane water emulsion as quenching media for metal heat treatment
ArticleAuthors	V. V. Strokova, A. Yu. Ryazanova, P. S. Baskakov, A. V. Abzalilova
ArticleAuthorsData	Belgorod State Technological University named after V. G. Shukhov (Belgorod, Russia) V. V. Strokova, Dr. Eng., Prof., Head of the Dept. of Material Science and Materials Technology, e-mail: s-nsm@mail.ru A. Yu. Ryazanova, Engineer-Researcher, Dept. of Material Science and Materials Technology, e-mail: YAnastasia.24@yandex.ru A. V. Abzalilova, Cand. Eng., Associate Prof., Dept. of Material Science and Materials Technology, e-mail: alina.ishchenko.92@mail.ru Belgorod State Technological University named after V. G. Shukhov (Belgorod, Russia)¹ ; Belenergomash JSC (Belgorod, Russia)² P. S. Baskakov, Cand. Eng., Associate Prof., Dept. of Material Science and Materials Technology; Leading Laboratory Engineer^{1, 2}, e-mail: rockbas@yandex.ru
Production of Rails
ArticleName	Study of hardness distribution in a rail welded joint after welding with accelerated cooling
ArticleAuthors	A. I. Karlina, V. V. Kondratyev, V. E. Gozbenko, R. V. Kononenko
ArticleAuthorsData	Moscow State University of Civil Engineering (Moscow, Russia) A. I. Karlina, Cand. Eng., Scientific Researcher, e-mail: karlinat@mail.ru A. P. Vinogradov Institute of Geochemistry of the Siberian Branch of the Russian Academy of Sciences (Irkutsk, Russia) V. V. Kondratyev, Cand. Eng., Senior Scientific Researcher Irkutsk State Transport University (Irkutsk, Russia)¹ ; Angarsk State Technical University (Angarsk, Russia)² V. E. Gozbenko, Dr. Eng., Prof.^{1, 2} Irkutsk National Research Technical University (Irkutsk, Russia) R. V. Kononenko, Cand. Eng.
Metal Science
ArticleName	Development and research of forming the properties in cold resistant steels with strength class not less than 950 MPa for the components of heavy carrying and lifting machines
ArticleAuthors	P. P. Poletskov, N. V. Koptseva, Yu. Yu. Efimova, A. S. Kuznetsova
ArticleAuthorsData	Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia) P. P. Poletskov, Dr. Eng., Prof., Dept. of Metal Processing Technology N. V. Koptseva, Dr. Eng., Prof., Dept. of Casting Processes and Materials Science Yu. Yu. Efimova, Cand. Eng., Associate Prof., Dept. of Metal Processing Technology A. S. Kuznetsova, Cand. Eng., Associate Prof., Dept. of Metal Processing Technology, e-mail: allakuznetsova.mgtu@mail.ru
ArticleName	Influence of metal structural heterogeneity in a sheet tube billet on forming mechanical properties and crack resistance of steel pipes for operation in the Arctic climate conditions
ArticleAuthors	N. O. Shaposhnikov, O. V. Shvetsov, B. S. Ermakov, S. A. Vologzhanina
ArticleAuthorsData	Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia) N. O. Shaposhnikov, Cand. Eng., Chief Engineer of the Project – Scientific and Technological Complex “New Technologies and Materials”, e-mail: shaposhn_no@spbstu.ru B. S. Ermakov, Dr. Eng., Head of the Materials Resource Laboratory, e-mail: ermakov55@bk.ru O. V. Shvetsov, Cand. Eng., Deputy Head of the Materials Resource Laboratory, Scientific and Technological Complex “New Technologies and Materials”, e-mail: shvetsov_ov@spbstu.ru Empress Catherine II Saint Petersburg Mining University (St. Petersburg, Russia) S. A. Vologzhanina, Dr. Eng., Prof., Dept. of Materials Science and Technology of Art Products, e-mail: vologzhanina_sa@pers.spmi.ru
Metal Science and Metal Physics
ArticleName	Viscoplastic properties of chromium-nickel steel in short-term creep under constant stress. Part 2
ArticleAuthors	A. Yu. Kuzkin, N. V. Martyushev, V. S. Tynchenko, T. A. Panfilova, Xiajgang Wu
ArticleAuthorsData	Empress Catherine II Saint Petersburg Mining University (St. Petersburg, Russia) A. Yu. Kuzkin, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering^, e-mail: Kuzkin_AYu@pers.spmi.ru* Tomsk Polytechnic University (Tomsk, Russia) N. V. Martyushev, Cand. Eng., Associate Prof.^, e-mail: martjushev@tpu.ru* Bauman Moscow State Technical University (Moscow, Russia)¹ ; Reshetnev Siberian State University of Science and Technology (Krasnoyarsk, Russia)² V. S. Tynchenko, Dr. Eng., Associate Prof.^{1, 2}, e-mail: vadimond@mail.ru Bauman Moscow State Technical University (Moscow, Russia)¹ ; Siberian Federal University (Krasnoyarsk, Russia)² T. A. Panfilova, Cand. Eng.^{1, 2}, e-mail: t_pan80@mail.ru Hebei University of Technology (Tianjin, China) Xiajgang Wu, Ph. D., Prof., e-mail: xgwu@hrbust.edu.cn ^*Corresponding authors.
Coating Application and Corrosion Protection
ArticleName	Corrosion protection of steel 30KhGSN2A in hydrogen sulphide-containing media using diffusion nickel coatings
ArticleAuthors	E. E. Bobylyov, E. G. Sokolov, A. D. Nirov, I. D. Storozhenko
ArticleAuthorsData	Kuban State Technological University (Krasnodar, Russia) E. E. Bobylyov, Cand. Eng., Associate Prof., e-mail: ebobylev@mail.ru E. G. Sokolov, Cand. Eng., Associate Prof. A. D. Nirov, Cand. Eng., Associate Prof. I. D. Storozhenko, Senior Lecturer
ArticleName	Properties of protective carbon films applied on stainless steels via magnetronic sputtering
ArticleAuthors	A. E. Litvinov, V. Yu. Buzko, S. N. Ivanin, M. V. Kolodin
ArticleAuthorsData	Kuban State Technological University (Krasnodar, Russia) A. E. Litvinov, Dr. Eng., Associate Prof., Head of the Dept. of Technical Mechanics and Special Machines, e-mail: artstyleone@mail.ru Kuban State Technological University (Krasnodar, Russia)¹ ; Kuban State University (Krasnodar, Russia)² ; Kuban State Agrarian University (Krasnodar, Russia)³ V. Yu. Buzko, Cand. Chem., Associate Prof.^{1, 3}, Dept. of Radiophysics and Nanomaterials² Kuban State Technological University (Krasnodar, Russia)¹ ; Kuban State University (Krasnodar, Russia)² ; Kuban State Agrarian University (Krasnodar, Russia)³ S. N. Ivanin, Cand. Chem., Researcher, Center for Advanced Technologies and Nanomaterials^{1, 2, 3} Kuban State University (Krasnodar, Russia) M. V. Kolodin, Mag. Eng., Dept. of Radiophysics and Nanomaterials
ArticleName	Comparative analysis of the use of epoxy and fluoroplastic polymer compositions as internal smooth coatings of the inner cavity of steel main gas pipelines
ArticleAuthors	E. I. Pryakhin, V. A. Azarov
ArticleAuthorsData	Empress Catherine II Saint Petersburg Mining University (St. Petersburg, Russia) E. I. Pryakhin, Dr. Eng., Prof., Head of the Dept. of Materials Science and Technology of Art Products, e-mail: e.p.mazernbc@yandex.ru V. A. Azarov, Postgraduate Student, Dept. of Materials Science and Technology of Art Products, e-mail: azarovvolodya@yandex.ru
Ecology and Recycling
ArticleName	Electroflotation extraction of a heavy metal hydroxide mixture from a multi-component solution
ArticleAuthors	Hein Thu Aung, A. V. Kolesnikov, Yu. M. Averina, V. V. Chelnokov
ArticleAuthorsData	Mendeleev University of Chemical Technology of Russia (Moscow, Russia) Hein Thu Aung, Cand. Eng., Doctoral Student of the Dept. of Technology of Inorganic Substances and Electrochemical Processes, e-mail: spiritlay@yandex.ru A. V. Kolesnikov, Cand. Eng., Associate Prof., Acting Head of the Dept. of Technology of Inorganic Substances and Electrochemical Processes, e-mail: kolesnikov.a.v@muctr.ru Yu. M. Averina, Cand. Eng., Associate Prof. Head of the Dept. of Logistics and Economic Informatics, e-mail: averina.i.m@muctr.ru V. V. Chelnokov, Dr. Eng., Prof., Dept. of Logistics and Economic Informatics, e-mail: chelnokov.v.v@muctr.ru
ArticleName	Lead extraction in low-temperature dust roasting during metal scrap melting in electric arc furnace together with ammonium chloride
ArticleAuthors	N. K. Dosmukhamedov, G. M. Koishina, E. E. Zholdasbay, M. B. Kurmanseitov
ArticleAuthorsData	Satbaev University (Almaty, Kazakhstan) N. K. Dosmukhamedov, Cand. Eng., Prof., e-mail: nurdos@bk.ru G. M. Koishina^, Ph. D., Assistant Prof., e-mail: gulzadakoishina@mail.ru* M. B. Kurmanseitov, Ph. D. Zhezkazgan University named after O. Baikonurov (Zhezkazgan, Kazakhstan) E. E. Zholdasbay, Ph. D., Assistant Prof. ^*Corresponding author

Journals → CIS Iron and Steel Review → 2024 → #2

Journals

CIS Iron and Steel Review

MPT International

Museums