Journals →  Chernye Metally →  2025 →  #9

Chernye Metally



Sintering
ArticleName Effect of water vapor injection into the sintered charge layer on the agglomeration process parameters and exhaust gas composition
ArticleAuthors A. N. Shapovalov, R. R. Dema, R. N. Amirov, O. R. Latypov
ArticleAuthorsData

Novotroitsk branch of NUST “MISIS”, Novotroitsk, Russia
A. N. Shapovalov, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, Deputy Director of the Branch for Science and Innovations


Novotroitsk branch of NUST “MISIS”, Novotroitsk, Russia1Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia2Kherson State University, Genichesk, Russia3

R. R. Dema, Dr. Eng., Associate Prof., Dept. of Machines and Technologies for Metal Forming and Mechanical Engineering2, Prof., Dept. of Metallurgical Technologies and Equipment1, Prof., Dept. of Mechanical Engineering3, e-mail: demarr78@mail.ru

R. N. Amirov, Cand. Eng., Associate Prof., Dept. of Machines and Technologies for Metal Forming and Mechanical Engineering2, Associate Prof., Dept. of Metallurgical Technologies and Equipment1, Associate Prof., Dept. of Mechanical Engineering3

 

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia1 ; Kherson State University, Genichesk, Russia2

O. R. Latypov, Cand. Eng., Associate Prof., Dept. of Machines and Technologies for Metal Forming and Mechanical Engineering1, Associate Prof., Dept. of Mechanical Engineering2

Steelmaking
ArticleName Comparative thermodynamic analysis of fluxing additives Na2O and CaO in iron recovery from silicate slag of ferrous metallurgy
ArticleAuthors Sh. T. Khojiev, D. B. Kholikulov, S. S. Mutalibkhonov, I. I. Shaymanov, G. Ma
ArticleAuthorsData

Almalyk Branch of Tashkent State Technical University named after Islam Karimov, Almalyk, Uzbekistan

Sh. T. Khojiev, Cand. Eng., Associate Prof., Dept. оf Metallurgy, e-mail: hojiyevshohruh@yandex.ru
D. B. Kholikulov, Dr. Eng., Prof., Dept. of Metallurgy, e-mail: Kholikulov.d@tdtuof.uz
S. S. Mutalibkhonov, Senior Lecturer, Dept. of Metallurgy, e-mail: mutalibkhonov1990@gmail.com
I. I. Shaymanov, Doctoral Student, Dept. of Metallurgy, e-mail: ikromshaymanov5@gmail.com

 

Wuhan University of Science and Technology, Wuhan, China

G. Ma, Cand. Eng., Prof., Hubei International Science and Technology Cooperation Base of Low Carbon Metallurgy Technology, e-mail: gma@wust.edu.cn

ArticleName Increasing the efficiency of refining rail steel from non-metallic inclusions during bottom blowing with inert gas in a ladle
ArticleAuthors A. A. Umanskiy, L. V. Dumova, R. A. Shevchenko, D. T. Feyler
ArticleAuthorsData

Siberian State Industrial University, Novokuznetsk, Russia

A. A. Umanskiy, Dr. Eng., Associate Prof., Director of the Institute of Metallurgy and Materials Science, e-mail: umanskii@bk.ru
L. V. Dumova, Cand. Eng., Senior Lecturer, Dept. of Management and Territorial Development, e-mail: doumova@bk.ru
R. A. Shevchenko, Cand. Eng., Associate Prof., Dept. of Ferrous Metallurgy and Chemical Engineering, e-mail: shefn1200@mail.ru
D. T. Feyler, Leading Engineer, Dept. of Ferrous Metallurgy and Chemical Engineering, e-mail: feyler_dt@sibsiu.ru

Foundry Production
ArticleName Evaluation of the possibility of using a complex technological additive to reduce the residual strength of sand-liquid glass mixtures for steel casting. Part 2
ArticleAuthors N. A. Kidalov, A. A. Belov, N. V. Belova, S. R. Polyak
ArticleAuthorsData

Volgograd State Technical University, Volgograd, Russia

N. A. Kidalov, Dr. Eng., Prof., Head of the Dept. of Foundry Machinery and Technology, e-mail: nich@vstu.ru
A. A. Belov, Cand. Eng., Associate Prof., Dept. of Foundry Machinery and Technology, e-mail: aa-belov@bk.ru
N. V. Belova, Cand. Eng., Associate Prof., Dept. of Foundry Machinery and Technology, Junior Researcher, Dept. of Science and Innovations
S. R. Polyak, Postgraduate Student, Second Category Engineer, Dept. of Foundry Machinery and Technology

Tubemaking and Metal Science
ArticleName Study of the influence of deformation rate on the metal structure of 08Kh18N10T steel pipes
ArticleAuthors V. F. Petrova, A. A. Kuznetsova
ArticleAuthorsData

Volgograd State Technical University, Volgograd, Russia

V. F. Petrova, Сand. Eng., Associate Prof., Dept. of Materials Technology, e-mail: tecmat@vstu.ru
A. A. Kuznetsova, Student, Dept. of Materials Technology, e-mail: An-kuz@bk.ru

ArticleName Development and mastering of the technology of thermal strengthening of coupling blanks of drill and casing pipes for oil production made of steel 32G2
ArticleAuthors A. T. Mammadov, A. A. Jafarova, S. M. Rustamova
ArticleAuthorsData

Azerbaijan Technology University, Baku, Azerbaijan

A. T. Mammadov, Dr. Eng., Prof., Professor–adviser, Dept. of Metallurgy and Technology of Materials, e-mail: ariff-1947@mail.ru
A. A. Jafarova, Cand. Eng., Associate Prof., Dept. of Chemical Technology, Processing and Ecology, e-mail: afetceferova8@gmail.com
S. M. Rustamova, Senior Lecturer, Dept. of Chemical Technology, Processing and Ecology, e-mail: sevilrustemova70@mail.ru

Quality Control and Metallography
ArticleName Quality control of metal of rolling rolls made of 8Kh3SMF steel by ultrasonic and metallographic methods
ArticleAuthors A. V. Belonosov, O. A. Chikova, N. A. Zaytseva
ArticleAuthorsData

Uralmashzavod, Yekaterinburg, Russia

A. V. Belonosov, Head of the Laboratory of Non-Destructive Testing Methods, Quality Directorate, e-mail: A.Belonosov@uralmash.ru

 

Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia
O. A. Chikova, Dr. Phys.-Math., Associate Prof., Prof., Dept. of Physics, Institute of Fundamental Education, e-mail: O.A.Chikova@urfu.ru
N. A. Zaytseva, Cand. Eng., Associate Prof., Dept. of Physics, Institute of Fundamental Education, e-mail: mail: n.a.zaitceva@urfu.ru

Education of Metallurgists in Technical Universities
ArticleName New multitrack model of training engineers in metallurgy and materials science to achieve technological leadership goals
ArticleAuthors L. V. Pankova, P. V. Kovalev, I. A. Matveyev, S. L. Barabantseva
ArticleAuthorsData

Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia

L. V. Pankova, Vice-Rector for Educational Activities
P. V. Kovalev, Deputy Director for Educational Activities, Institute of Mechanical Engineering, Materials and Transport, e-mail: kovalev_pv@spbstu.ru
I. A. Matveyev, Director of the Center for Organization of the Educational Process

 

Severstal Management, Cherepovets, Russia

S. L. Barabantseva, Head of the Department for Working with Young Talents

ArticleName Improvement of higher metallurgical education. Experience of MISIS University
ArticleAuthors D. S. Kuznetsov, A. M. Merkulova, Yu. I. Rishko, A. Ya. Travyanov
ArticleAuthorsData

National University of Science and Technology MISIS, Moscow, Russia

D. S. Kuznetsov, Head of Division of Educational Information Technologies, e-mail: kuznetsov.ds@misis.ru
A. M. Merkulova, Cand. Eng., Associate Prof., Deputy Head of Learning Methodology Office, e-mail: anna-merkulova@misis.ru
Yu. I. Rishko, Cand. Eng., Associate Prof., Head of Learning Methodology Office, e-mail: rishko@misis.ru
A. Ya. Travyanov, Cand. Eng., Associate Prof., Cand. Eng., Associate Prof., Head of the College of Technologies, e-mail: trav@misis.ru

ArticleName Training of metallurgists at Nizhny Novgorod State Technical University named after R. E. Alekseev
ArticleAuthor I. O. Leushin
ArticleAuthorData

Nizhny Novgorod State Technical University named after R. E. Alekseev (federal flagship university), Nizhny Novgorod, Russia

I. O. Leushin, Dr. Eng., Prof., Head of the Dept. of Metallurgical Technologies and Equipment, e-mail: igoleu@yandex.ru

ArticleName Experience of training bachelors in metallurgy at the Siberian State Industrial University
ArticleAuthors O. G. Prikhodko, I. Yu. Kolchurina
ArticleAuthorsData

Siberian State Industrial University, Novokuznetsk, Russia

O. G. Prikhodko, Cand. Eng., Associate Prof., Vice-Rector for Educational Activities, e-mail: prihodko_og@sibsiu.ru
I. Yu. Kolchurina, Cand. Eng., Associate Prof., Director of the Institute of Advanced Engineering Technologies, e-mail: ipit-sibsiu@yandex.ru

Economics and Finances
ArticleName Steel T-junctions in Germany: state and prospects of the German iron and steel industry in 2025
ArticleAuthor S. A. Roginko
ArticleAuthorData

Institute of Europe, Russian Academy of Sciences, Moscow, Russia

S. A. Roginko, Head of the Center for Ecology and Development, e-mail: roginko@bk.ru

Archeology and Metallurgy
ArticleName Iron hunting tools of the Ural Mansis
ArticleAuthors B. A. Gizhevskiy, M. V. Degtyarev, S. V. Naumov, K. Yu. Karamyshev
ArticleAuthorsData

M. N. Mikheev Institute of Metal Physics, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia
B. A. Gizhevskiy, Cand. Phys.-Math., Senior Researcher, e-mail: gizhevskii@imp.uran.ru
M. V. Degtyarev, Dr. Eng., Chief Researcher, e-mail: highpress@imp.uran.ru
S. V. Naumov, Cand. Phys.-Math., Senior Researcher, e-mail: naumov@imp.uran.ru
K. Yu. Karamyshev, Junior Researcher, e-mail: karamyshev.imp@mail.ru

Journals →  Chernye Metally →  2025 →  #9