Chernye Metally

Mineral Processing
Название	Effect of finely dispersed component on the processing of iron-containing raw materials
Авторы	I. A. Grishin, E. Yu. Degodya, I. A. Pytalev, O. V. Zoteev, I. V. Shadrunova
Информация об авторах	Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia I. A. Grishin, Cand. Eng., Associate Prof., Head of the Dept. of Geology, Mine Surveying and Mineral Processing, e-mail: igorgri@mail.ru E. Yu. Degodya, Cand. Eng., Associate Prof., Dept. of Geology, Mine Surveying and Mineral Processing, e-mail: magur@mail.ru I. A. Pytalev, Dr. Eng., Prof., Director of the Institute of Mining and Transport, e-mail: vehicle@list.ru The Institute of Mining, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia O. V. Zoteev, Dr. Eng., Prof., Head of the Laboratory of Geodynamics and Rock Pressure Research Institute of Comprehensive Exploitation of Mineral Resources, Russian Academy of Sciences, Moscow, Russia I. V. Shadrunova, Dr. Eng., Prof., Head of the Mining Ecology Dept., e-mail: shadrunova_@mail.ru
Ironmaking
Название	Improvement of blast furnace efficiency by including coke from MMK’s battery No. 12 in the charge
Авторы	A. V. Pavlov, A. S. Kharchenko, S. V. Yudina, S. K. Sibagatullin, V. K. Dubrovin
Информация об авторах	Magnitogorsk Iron and Steel Works, Magnitogorsk, Russia A. V. Pavlov, Cand. Eng., Head of Blast Furnace Shop Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia A. S. Kharchenko, Dr. Eng., Associate Prof., Head of the Dept. of Metallurgy and Chemical Engineering, e-mail: as.mgtu@mail.ru S. V. Yudina, Postgraduate Student, Dept. of Metallurgy and Chemical Engineering S. K. Sibagatullin, Dr. Eng., Prof., Dept. of Metallurgy and Chemical Engineering, e-mail: 10tks@mail.ru South Ural State University, Chelyabinsk, Russia. V. K. Dubrovin, Dr. Eng., Prof., Dept. of Pyrometallurgical and Foundry Technologies
Название	Development of universal scale of flat sections of typical spatial shapes of graphite inclusions in cast iron
Авторы	T. A. Sivkova, A. G. Panov, V. A. Ivanova, N. G. Degtyareva
Информация об авторах	SIAMS Company, Yekaterinburg, Russia T. A. Sivkova, Head of Engineering Department, e-mail: sivkova@siams.com Yaroslavl State Technical University, Yaroslavl, Russia A. G. Panov, Dr. Eng., Associate Prof., Prof., Dept. of Materials Technology, Standardization, and Metrology, e-mail: panov.ag@mail.ru V. A. Ivanova, Dr. Eng., Associate Prof., Director of the Institute of Engineering and Mechanical Engineering, e-mail: ivanovava@ystu.ru Modificator Research Center, Naberezhnye Chelny, Russia N. G. Degtyareva, Metallurgist, e-mail: dnadegda@list.ru
Rolling
Название	Study of influence of geometric asymmetry on deformation heating during hot rolling
Авторы	K. S. Gorbunov, A. G. Levykina, L. V. Nosov, I. P. Mazur
Информация об авторах	Lipetsk State Technical University, Lipetsk, Russia K. S. Gorbunov, Cand. Eng., Assistant, Dept. of Metal Forming, e-mail: beluivolk96@mail.ru A. G. Levykina, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: levikina48@yandex.ru Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia L. V. Nosov, Engineer, Scientific-Innovation Sector, A. P. Zhilyaev Research Laboratory “Mechanics of gradient nanomaterials”, e-mail: nosov.leopold@yandex.ru I. P. Mazur, Dr. Eng., Prof., Chief Researcher, Scientific-Innovation Sector, A. P. Zhilyaev Research Laboratory “Mechanics of gradient nanomaterials”, e-mail: mazur_ip@mail.ru
Foundry Production
Название	Determination of technological parameters for manufacturing a back-up roll based on predicting the thermal state of the roll barrel-chill mold system
Авторы	K. V. Fochina, A. S. Savinov, I. V. Mikhalkina, S. M. Andreev, V. P. Chernov
Информация об авторах	Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia K. V. Fochina, Assistant, Dept. of Mechanics A. S. Savinov, Dr. Eng., Prof., Head of the Dept. of Mechanics, Director of the Institute of Metallurgy, Mechanical Engineering, and Materials Processing I. V. Mikhalkina, Cand. Eng., Associate Prof., Dept. of Casting Processes and Materials Science, e-mail: miv.mgtu@mail.ru S. M. Andreev, Dr. Eng., Head of the Dept. of Automated Control Systems V. P. Chernov, Dr. Eng., Prof., Dept. of Casting Processes and Materials Science
Tubemaking
Название	Development of adaptive system for controlling geometrical parameters of hot-rolled pipes based on machine vision technologies
Авторы	I. Yu. Pyshmintsev, E. A. Shkuratov, I. V. Kosmin, S. K. Rosolenko, G. A. Yashin
Информация об авторах	TMK Research Center, Moscow, Russia I. Yu. Pyshmintsev, Dr. Eng., Prof., General Director E. A. Shkuratov, Cand. Eng., Head of the Digitalization and Artificial Intelligence Technologies Department, e-mail: evgeniy.shkuratov@tmk-group.com I. V. Kosmin, Research Engineer, Digitalization and Artificial Intelligence Technologies Department S. K. Rosolenko, Engineer, Digitalization and Artificial Intelligence Technologies Department G. A. Yashin, Development Engineer, Digitalization and Artificial Intelligence Technologies Department
Metal Science and Heat Treatment
Название	Comparison of ShKh15 and ShKh15SG steels as alternative materials for manufacturing Common Rail fuel system parts
Авторы	M. N. Zenin, S. G. Ivanov, S. A. Zemlyakov, V. B. Deev, M. A. Guryev
Информация об авторах	Polzunov Altai State Technical University, Barnaul, Russia M. N. Zenin, Junior Researcher, e-mail: mikhail.zenin.96@mail.ru Innovation Center for Modern Textile Technologies (Jianhu Laboratory), Shaoxing, China¹ ; Wuhan Textile University, Wuhan, China² ; Altai State University, Barnaul, Russia³ S. G. Ivanov, Dr. Eng., Leading Researcher¹, Leading Researcher, National Key Laboratory of Digital Textile Machinery, Hubei Province², Professor³, e-mail: serg225582@yandex.ru Wuhan Textile University, Wuhan, China¹ ; Jiangsu Suyang Packaging Co., Ltd, Yizheng City, Jiangsu, China² S. A. Zemlyakov, Cand. Eng., Leading Researcher, National Key Laboratory of Digital Textile Machinery, Hubei Province¹, Chief Researcher², e-mail: kobalt_20@mail.ru Wuhan Textile University, Wuhan, China¹ ; Moscow Polytechnic University, Moscow, Russia² ; Siberian State Industrial University, Novokuznetsk, Russia³ V. B. Deev^, Dr. Eng., Prof., National Key Laboratory of Digital Textile Machinery, Hubei Province¹, Head of the Dept. of Welding Equipment and Technologies²; Consulting Professor, Dept. of Ferrous Metallurgy and Chemical Engineering³, e-mail: deev.vb@mail.ru* Polzunov Altai State Technical University, Barnaul, Russia¹ ; Zhejiang Briliant Refrigeration Equipment Co., Ltd, Xingchang, China² M. A. Guryev, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering Technology¹, Technical Director², e-mail: gurievma@mail.ru *Corresponding author
Название	Investigation of the influence of heat treatment on the microstructure and mechanical properties of 35KhGSL steel for teeth and crowns of a quarry excavator
Авторы	B. S. Ermakov, O. V. Shvetsov, S. B. Ermakov, A. M. Zolotov, S. A. Vologzhanina
Информация об авторах	Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia B. S. Ermakov, Dr. Eng., Head of the Materials Resources Laboratory, e-mail: ermakov_bs@spbstu.ru O. V. Shvetsov, Cand. Eng., Deputy Head of the Materials Resources Laboratory S. B. Ermakov, Cand. Eng., Research Engineer, Scientific and Technical Complex “New Technologies and Materials” A. M. Zolotov, Dr. Eng., Prof., Higher School of Physics and Materials Technology Empress Catherine II St. Petersburg Mining University, St. Petersburg, Russia S. A. Vologzhanina, Dr. Eng., Prof., Dept. of Materials Science and Technology of Art Products, e-mail: vologzhanina_sa@pers.spmi.ru
Powder Metallurgy and Additive Technologies
Название	Technology for manufacturing composite materials in furnace by pressing with pause method
Авторы	Z. A. Namazova, S. A. Jafarova, E. A. Abdulazimova, A. J. Mansimov, B. B. Musurzayeva
Информация об авторах	Azerbaijan Technical University, Baku, Azerbaijan Z. A. Namazova, Cand. Eng., Associate Prof., Dept. of Metallurgy and Technology of Materials, e-mail: z_namazova76@mail.ru S. A. Jafarova, Cand. Eng., Associate Prof., Dept. of Metallurgy and Technology of Materials, e-mail: saida.jafarova2011@gmail.com A. J. Mansimov, Cand. Eng., Associate Prof., Senior Lecturer, Dept. of Metallurgy and Technology of Materials, e-mail: akif.mensimov@bk.ru B. B. Musurzayeva, Senior Lecturer, Dept. of Metallurgy and Materials Technology, e-mail: musurzayeva71@mail.ru Baku Engineering University, Baku, Azerbaijan E. A. Abdulazimova, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, e-mail: yabdulazimova@beu.edu.az
Название	Structure formation in 08KhMFA steel by additive arc growth (WAAM)
Авторы	Yu. G. Kabaldin, M. S. Anosov, M. A. Chernigin, Yu. S. Mordovina
Информация об авторах	Nizhny Novgorod State Technical University named after R. E. Alekseev, Nizhny Novgorod, Russia Yu. G. Kabaldin, Dr. Eng., Prof., Dept. of Mechanical Engineering Technology and Equipment, Institute of Industrial Technologies in Mechanical Engineering M. S. Anosov, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering Technology and Equipment, Institute of Industrial Technologies in Mechanical Engineering, e-mail: anosov.ms@nntu.ru M. A. Chernigin, Engineer, Dept. of Mechanical Engineering Technology and Equipment, Institute of Industrial Technologies in Mechanical Engineering, e-mail: honeybadger52@yandex.ru Yu. S. Mordovina, Postgraduate Student, Lead Engineer, Institute for Retraining of Specialists, Assistant, Dept. of Mechanical Engineering Technological Complexes, Institute of Industrial Technologies in Mechanical Engineering, e-mail: ips4@nntu.ru
Название	Additive technologies in toolmaking: A case of finishing gear cutting tools
Авторы	V. A. Belyakova, I. A. Vorobyov, G. A. Nuzhdin, S. M. Nikolsky
Информация об авторах	Tula State University, Tula, Russia V. A. Belyakova, Cand. Eng., Associate Prof., e-mail: valentina.belyakova5@yandex.ru I. A. Vorobyov, Cand. Eng., Associate Prof., e-mail: imsilya@mail.ru S. M. Nikolsky, Postgraduate Student, e-mail: serg.nickolscky@yandex.ru SPC Tekhpolikom, Moscow, Russia G. A. Nuzhdin, Deputy General Director for Quality, e-mail: nuzhdin.65@mail.ru
Metal Physics
Название	Changes in the properties of 20 grade sheet steel depending on rolled products thickness
Авторы	S. A. Tipalin, D. A. Gnevashev, N. D. Borisov, M. V. Bodnar, V. A. Klimov
Информация об авторах	Moscow Polytechnic University, Moscow, Russia S. A. Tipalin, Cand. Eng., Prof., Dept. of Material Forming and Additive Technologies, e-mail: tsa_mami@mail.ru D. A. Gnevashev, Cand. Eng., Associate Prof., Dept. of Material Forming and Additive Technologies, e-mail: dengnevashev@mail.ru N. D. Borisov, Postgraduate Student, Dept. of Material Forming and Additive Technologies M. V. Bodnar, Postgraduate Student, Dept. of Material Forming and Additive Technologies V. A. Klimov, Postgraduate Student, Dept. of Material Forming and Additive Technologies
Coatings Application and Corrosion Protection
Название	Modification of protective amorphized glass-enamel coating for steel pipelines to increase adhesion to steel
Авторы	E. A. Yatsenko, A. V. Ryabova, V. M. Kurdashov, V. D. Tkachenko
Информация об авторах	Platov South-Russian State Polytechnical University, Novocherkassk, Russia E. A. Yatsenko, Dr. Eng., Prof., Head of the Dept. of General Chemistry and Technology of Silicates, Head of the Lab. of Recycling of Fuel Energy Waste Recycling, e-mail: e_yatsenko@mail.ru A. V. Ryabova, Cand. Eng., Associate Prof., Dept. of General Chemistry and Technology of Silicates, Senior Researcher, Lab. of Recycling of Fuel Energy Waste Recycling, e-mail: annet20002006@yandex.ru V. M. Kurdashov, Postgraduate Student, Dept. of General Chemistry and Technology of Silicates, Engineer, Lab. of Recycling of Fuel Energy Waste Recycling, e-mail: viktorkurdashov@yandex.ru V. D. Tkachenko, Postgraduate Student, Dept. of General Chemistry and Technology of Silicates, Engineer, Lab. of Recycling of Fuel Energy Waste Recycling, e-mail: tkachenko.vadik2014@yandex.ru

Журналы → Chernye Metally → 2025 → №12

Журналы

CIS Iron and Steel Review

Горный мир музеев