Journals →  Tsvetnye Metally →  2012 →  #8

Tsvetnye Metally


 

The articles, which are published in the 8-th issue of the «Tsvetnye metally» journal, cover the thematics of hard and light non-ferrous metals, noble metals and alloys, rare and radioactive metals. This issue shares the questions of theory and practice of ore benefication, production and processing of non-ferrous metals, complex usage of ore raw materials, economics and management of production.

 

This journal presents a publication of the issues from «Russian Copper Company» JSC. There is generalized the implementation experience of innovation projects on enterprises, which belong to the group of companies of Russian Copper Company.

 

First collection of articles considers the innovation implementation results on the oldest Russian enterprise of copper metallurgy in Karabash city. The copper-smelting plant, which has more than a 100-years history, gets another impulse in its development, due to the usage of more progressive technologies and equipment in non-ferrous metallurgy, by the strict requirements of environmental regulations and competition on the market of copper-containing raw materials. The information, which is presented in the articles, shows the ways of solving the problems of an enterprise, positive and negative experience of implementation of the innovation technologies and equipment. The next collection of articles from Russian Copper Company will be published in the 9-th issue of a journal (September, 2012).

 

The article by N. V. Serova, M. P. Lysykh, T. V. Olyunina, A. G. Kitay and V. T. Dyachenko, shares the development results of a method of autoclave leaching of oxidized nickel ores with using the elementary sulfur. This method can compete with sulfuric acid autoclave leaching, taking into account the considerable cheapness of the basic reagent and more low values of the technological parameters of the process.

 

The data about the first years of the operation of Kazakhstan electrolysis plant are presented in the article by S. A. Nikiforov and B. S. Dyblin. There is also given the historical information about the startup of plant. There are given some constructive peculiarities of aluminium electrolysers, along with the data about the heat and power engineering characteristics of electrolysers. The technology method is based on the control and management of the process temperature. The data about the power yield, are presented along with a specific energy consumption and quality of the used alumina. The reserves in the increasing of technical and economic indicators are shown.

 

The «Metal processing» section presents a scientific review, which is devoted to the global achievements in the development area of WC – Co hard alloys with the gradient structure. The history of this question is briefly presented.

 

The following kinds of gradient structures are considered:

-the structures, which are characterized by the variable composition on the volume or the height of the product;

-the structures, which are characterized by the changing of the alloy`s microstructure (granularity and/ore the structure of the phases) in the volume or the thickness of the product;

-the structures, which are characterized by the presence of the alloy`s phases, which are specified by the thickness.

 

The results of the experimental researchings are discussed for the purpose of the creation of functional gradient, at the expense of the carbide phase of various structure, as well as the gradient structure, which is created by this phase of the various dispersity.

 

The mechanism of the gradient formation is discussed; in particular – the cobalt migration in the volume of the sintered product.

 

The basic attention is payed for the solid alloys, which are used for the equipping of the cutting and boring tools.

 

The global usage capacity of WC-Co-alloys for this instrument is ~85–90 % from the common usage of solid alloys.

 

During the cutting and boring process, the solid alloys with a gradient structure provide the increasing of the durability of tools to 2-4 times.

 

More details about the issue you can find below or book printed or electronic version of the journal.


ECONOMICS AND MANAGEMENT OF PRODUCTION
ArticleName International review of market of non-ferrous metals
ArticleAuthor Norilsk Nickel Mining and Metallurgical plant
ArticleAuthorData

Norilsk Nickel Mining and Metallurgical plant, phone: (495) 787-76-34, e-mail: korneevsi@rao.nornik.ru

ArticleName Game theory and strategy of pricing for recycled materials
ArticleAuthors Kruzhkova G. V., Kostyukhin Yu. Yu.
ArticleAuthorsData

National University of Science and Technology "MISIS" (MISIS), Moscow, Russia

G. V. Kruzhkova, Senior Lecturer of a Chair of an Engineering Cybernetics, e-mail: galkruzhkova@mail.ru
Yu. Yu. Kostyukhin, Professor of a Chair of Industrial Management

BENEFICIATION
ArticleName The assessment of options for processing refractory flotation concentrates
ArticleAuthors Emelyanov Yu. E., Bogorodskiy A. V., Balikov S. V., Epiforov A. V.
ArticleAuthorsData

IRGIREDMET JSC, Irkutsk, Russia

Yu. E. Emelianov, Leading Researcher
A. V. Bogorodskiy, Senior Researcher, e-mail: bav@irgiredmet.ru
S. V. Balikov, Business Centre Director
A. V. Epiforov, Junior Researcher

ArticleName Flotation research of the ores of ferrous and noble metals by steam-and-air mixture
ArticleAuthors Evdokimov S. I., Artemov S. V., Panshin A. M., Datsiev M. S.
ArticleAuthorsData

The North Caucasian Institute of Mining and Metallurgy (State Technological University), Vladikavkaz, North Ossetia Alania Republic, Russia

S. I. Evdokimov, Assistant Professor, e-mail: eva-ser@mail.ru
S. V. Artemov, Post Graduate Student
A. M. Panshin, Candidate for a Doctor`s Degree

M. S. Datsiev, Post Graduate Student

HEAVY NON-FERROUS METALS
ArticleName Innovations in copper metallurgy by the example of a realization of a reconstruction project of “Karabashmed” JSC. Part 1. Choice of a basic melting device
ArticleAuthors Altushkin I. A., Korol Yu. A., Golov A. N.
ArticleAuthorsData

Russian Copper Company LTD, Ekaterinburg, Russia

I. A. Altushkin, Head of a Board of Directors
Yu. A. Korol, Vice President

 

“Karabashmed” JSC, Karabash, Russia

A. N. Golov, Chief Executive Officer

ArticleName Innovations in copper metallurgy by the example of a realization of a reconstruction project of “Karabashmed” JSC. Part 2. Experience of “Ausmelt” furnace development
ArticleAuthors Altushkin I. A., Korol Yu. A., Bakin A. V., Krasilnikov Yu. V.
ArticleAuthorsData

Russian Copper Company LTD, Ekaterinburg, Russia

I. A. Altushkin, Head of a Board of Directors
Yu. A. Korol, Vice President, e-mail: u.korol@mail.ru
A. V. Bakin, Vice President


“Karabashmed” JSC, Karabash, Russia

Yu. V. Krasilnikov, Chief Engineer

ArticleName Iron powder recycling in refining technology as a way of safety furthering
ArticleAuthors Maltsev E. V., Sobachinsky N. N., Khmelev N. B., Pavlov E. A.
ArticleAuthorsData

“Krastsvetmet” JSC, Krasnoyarsk, Russia

E. V. Maltsev, Deputy Chief Executive Officer, Chief Engineer, e-mail: info@krastsvetmet.ru
N. N. Sobachinsky, Head of a Shop of Platinum Group Metals Beneficiation and Derefining of Refinery Industry Products
N. B. Khmelev, Deputy Head of a Shop of Beneficiation and Processing of Industrial Products
E. A. Pavlov, Head of Department of Obtaining the Precious Metals and Control of its Alloys of Experimental and Industrial Shop

ArticleName An influence of the autoclave oxidation leaching of copper electrolytic slimes on their flotation behavior
ArticleAuthors Lastochkina M. A., Mastyugin S. A., Vergizova T. V., +Greyver T. N. , Ashikhin V. V.
ArticleAuthorsData

“Gipronickel” Institute LLC, Saint Petersburg, Russia

M. A. Lastochkina, Senior Researcher, e-mail: MALas@nikel.spb.ru

T. V. Vergizova, Senior Researcher

 

“Uralelectromed” OJSC, Verkhnyaya Pyshma, Russia

S. A. Mastyugin, Chief Technologist of an Engineering Department

V. V. Ashikhin, Chief Engineer

ArticleName Autoclave leaching of the oxidised Buruktalsk nickel ores with usage of the elementary sulphur
ArticleAuthors Serova N. V., Lysykh M. P., Olyunina T. V., Kitay A. G., Dyachenko V. T.
ArticleAuthorsData

A. A. Baikov Institute of Metallurgy and Materials Science of Russian Academy of Sciences, Moscow, Russia

N. V. Serova, Senior Researcher
M. P. Lysykh, Researcher
T. V. Olyunina, Deputy Senior Researcher, e-mail: toliun@yandex.ru
A. G. Kitay, Leading Researcher

 

“Norilsk Nickel” MMC, Norilsk, Russia

V. T. Dyachenko, Head of Administratiion of Idustrial and Engineering Development

ALUMINIUM, ALUMINA, CARBON MATERIALS
ArticleName Interaction of alumina from the electrolyte in conditions of increased content coal foam
ArticleAuthors Sizyakov V. M., Bazhin V. Yu., Vlasov A. A., Feschenko R. Yu.
ArticleAuthorsData

Chair of Metallurgy of Non-ferrous Metals, National Mineral Resources University, Saint Petersburg, Russia

V. M. Sizyakov, Professor, e-mail: kafmetall@mail.ru
V. Yu. Bazhin, Assistant Professor
A. A. Vlasov, Engineer-Metallurgist
R. Yu. Feschenko, Engineer-Metallurgist

ArticleName About the operational experience of “Kazakhstan Electrolysis Plant” JSC
ArticleAuthors Nikiforov S. A., Dyblin B. S.
ArticleAuthorsData

“Expert-Al” LLC, Saint Petersburg, Russia

S. A. Nikiforov, Chief Executive Officer, e-mail: expertal.spb@yandex.ru
B. S. Dyblin, Senior Researcher — Consultant

ArticleName Decomposition of the sodium aluminate solution with use of aluminium sulfate in decomposition operation
ArticleAuthors Loginova I. V., Shoppert A. A.
ArticleAuthorsData

Chair of Lightweight Metals Metallurgy, Institute of Materials Science and Metallurgy, Federal State Autonomous Educational Institution of Higher Professional Education “Ural Federal University named after the first President of Russia B. N. Yeltsin”, Ekaterinburg, Russia

I. V. Loginova, Assistant Professor, e-mail: loginova_irina@mail.ru
A. A. Shoppert, Post Graduate Student

MAGNESIUM, TITANIUM, RARE METALS, SEMICONDUCTORS
ArticleName A technology of sodium-reduced zirconium powders
ArticleAuthors Orlov V. М., Fedorova L. А., Кalinnikov V. Т., Yaroshenko V. V., Valeev S. М.-А.
ArticleAuthorsData

I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials of Russian Academy of Sciences Kola Scientific Center (ICTREMRM KSC RAS), Apatity, Russia

V. М. Orlov, Head of Laboratory, e-mail: orlov@chemy.kolasc.net.ru

L. А. Fedorova, Researcher
V. Т. Кalinnikov
, Director

 

Russian Federal Nuclear Center of All-Russian Scientific-Research Institute of Experimental Physics, Sarov, Russia

V. V. Yaroshenko, Head of Department


FSUE “Mayak” Production Association”, Ozersk, Russia

S. М.-А. Valeev, Executive Officer on Special Production

ArticleName Production of titanium slag and cast iron from the khibiny titanomagnetite concentrate
ArticleAuthors Mayorov L. A., Kolesnikova I. G., Kuzmich Yu. V.
ArticleAuthorsData

I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials of Russian Academy of Sciences Kola Scientific Center (ICTREMRM KSC RAS), Apatity, Russia

L. A. Mayorov, Junior Researcher, е-mail: mayor_la@chemy.kolasc.net.ru
I. G. Kolesnikova, Researcher
Yu. V. Kuzmich, Deputy Head of Laboratory of Powders Metallurgy, Researcher

ArticleName Molybdenium distribution research during the extraction of titanium, niobium and tantalum from the fluoride solutions
ArticleAuthors Mayorov V. G., Nikolaev A. I., Safonova L. A.
ArticleAuthorsData

I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials of Russian Academy of Sciences of Kola Science Center (ICTREMRM KSC RAS), Apatity, Russia

V. G. Mayorov, Senior Researcher
A. I. Nikolaev, Deputy Director on Scientific Work, e-mail : nikol_ai@chemy.kolasc.net.ru
L. A. Safonova, Third Category Technologist

RADIOACTIVE ELEMENTS
ArticleName Radioecological aspects of processing of Kola region mineral raw materials
ArticleAuthor Melnik N. A.
ArticleAuthorData

I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials of Russian Academy of Sciences Kola Scientific Center (ICTREMRM KSC RAS), Apatity, Russia

N. A. Melnik, Senior Researcher, Head of a Regional Laboratory of Radiation Control, e-mail: melnik@chemy.kolasc.net.ru

ArticleName Diagnosis of deviations n the process of extraction refining the nuclear fuel
ArticleAuthors Krivopustov S. I., Pishchulin V. P., Brendakov V. N., Kladiev S. N., Cheshuyakov S. А.
ArticleAuthorsData

Seversk Technological Institute of National Research Nuclear University of Moscow Engineering Physics University (МIFI), Seversk, Russia

S. I. Krivopustov, Post Graduate Student
V. P. Pishchulin, Professor, e-mail: pischulin@ssti.ru
V. N. Brendakov, Head of a Chair
S. N. Kladiev, Assistant Professor
S. А. Cheshuyakov, Post Graduate Student

METAL PROCESSING
ArticleName The review: hard alloys with gradient structure. Theory and practice
ArticleAuthors Falkovskiy V. A., Borovskiy G. V., Klyachko L. I., Molodyk S. U., Belyaev S. K.
ArticleAuthorsData

«VNIIINSTRUMENT» Russian Research & Development Tooling Institute, Moscow, Russia

V. A. Falkovskiy, Chief Researcher, e-mail: vafalk@rumbler.ru
G. V. Borovskiy, Chief Executive Officer

S. U. Molodyk, Head of Department
S. K. Belyaev, Head of Laboratory


OJSC «Kirovgrad Hard Alloys Plant», Kirovgrad, Russia

L. I. Klyachko, Scientific Consultant

Journals →  Tsvetnye Metally →  2012 →  #8