“CIS Iron and Steel Review” is the only Russian metallurgical scientific-technical journal in English, publishing materials about whole spectrum of the problems, innovations and news of foreign iron and steel industry.

Way of the journal distribution - free access to the papers, published with article processing charge (APC).

The mission of this edition is to make foreign specialists aware about scientific and technical researches and development in iron and steel industry in the former USSR countries.

Published since 2006, volume up to 116 pages, circulation up to 40 copies. ISSN 2072-0815.

"CIS Iron and Steel Review" journal publishes both separate articles about innovations in the field of iron and steel industry and experience of their putting into practice at metallurgical works, and also complex collections of materials on plants and technological directions. The topics of publications covers whole area of metallurgical production from iron- and steel making, casting and rolling to finishing, heat treatment and coating of metal products. Serious attention is paid in the journal to up-to-date technological processes (such as metal shape memory, superductility, manufacture of large diameter tubes, micro-mills etc), as well as actual problems of environment protection, resource saving and training of specialists.

Editorial council of "CIS Iron and Steel Review" journal includes 25 well-known and respectable metallurgists, i.e. 3 foreign specialists from Germany and Canada.

Editorial board:

Actual address: Office 617, Leninsky prospect 6, bld. 2
(National University of Science and Technology "MISIS" (MISIS), bld. A), Moscow, 119049 Russia
Mailing address: P.O. Box No. 71, Moscow, 119049, Russia
Phone / Fax: +7 (495) 955-01-75
E-mail: chermet@rudmet.ru
Internet: www.rudmet.ru

 

Founders:

"Ore and Metals” Publishing House

Nosov Magnitogorsk State Technical University

 

Editorial council:

Editor-in-Chief – Evgeny Tsirulnikov

Deputy Editor-in-Chief – Konstantin Kosyrev

Deputy Editor-in-Chief – Alexander Vorobiev
Responsible Secretary – Elena Rakhmanova, "Ore and Metals" Publishing House, Moscow, Russia

Belenky A. M., D. Eng., Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia;

Bobarikin Yu. L., C. Eng., Ass. Prof., Sukhoi State Technical University of Gomel, Gomel, Belarus;

Boriskin O. I., D. Eng., Prof., Tula State University (Tula, Russia);

Butorina I. V., D. Eng., Prof., St. Petersburg Polytechnical University, St. Petersburg, Russia;

Chichenev N. A., D. Eng., Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia;
Chukin M. V., D. Eng. Prof., Magnitogorsk State Technical University named after G. I. Nosov, Magnitogorsk, Russia;

Elansky D. G., C. Eng., Ass. Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia;

Galkin S. P., D. Eng., Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia;

Goli-Oglu E. A., PhD, NLMK DanSteel, Frederiksværk, Denmark;

Illarionov I. E., D. Eng., Prof., Chuvash State University named after I. N. Ulyanov, Cheboksary, Russia;

Kaputkina L. M., D. Phys.-Math., Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia;

Kazakov A. A., D. Eng., Prof., St. Petersburg State Polytechnical University, Saint Petersburg, Russia;

Kolikov A. P., D. Eng., Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia;

Kolokoltsev V. M., D. Eng., Prof., Magnitogorsk State Technical University, Magnitogorsk, Russia;

Korchunov A. G., D. Eng., Prof., Magnitogorsk State Technical University, Magnitogorsk, Russia;

Kosyrev K. L., D. Eng., Prof., Scientific and Production Association CNIITMASH, Moscow, Russia;

Kushnarev A. V., D. Eng., EVRAZ NTMK, Nizhniy Tagil, Russia;

Leushin I. O., D. Eng., Prof., Nizhny Novgorod State Technical University, Nizhniy Novgorod, Russia;

Matveeva T. N., D. Eng., Research Institute of Comprehensive Exploitation of Mineral Resources of Russian Academy of Sciences, Moscow, Russia;

Mazur I. P., D. Eng., Prof., Lipetsk State Technical University, Lipetsk, Russia;

Pelevin A. E., D. Eng., Prof., Ural State Mining University, Ekaterinburg, Russia;

Potravny I. M., D. Econ., Prof., Plekhanov Russian University of Economics, Moscow, Russia;

Rakhmanova E. Yu., "Ore and Metals" Publishing House, Moscow, Russia;

Savenok A. N., General Director, Minsk Bearing Works, Minsk, Byelorussia;

Serebryakov An. V., C. Eng., Pervouralsk New Pipe Plant, Pervouralsk, Russia;

Sidorova E. Yu., D. Econ., Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia;

Sultanguzin I. A., D. Eng., Prof., National Research University "Moscow Power Engineering Institute", Moscow, Russia;
Tkachenko S. S., D. Eng., Prof., Engineering and Technological Institute of Casting Production, Saint Petersburg, Russia;

Travyanov A. Ya., C. Eng., Ass. Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia;

Tsirulnikov E. V., Editor-in-Chief, "Ore and Metals" Publishing House, Moscow, Russia;

Volynkina E. P., D. Eng., Prof., Novokuznetsk, Russia;

Vorobiev A. G., D. Ec., Prof.,"Ore and Metals" Publishing House, Moscow, Russia;

Vydrin A. V., D. Eng., Prof., Deputy Gen. Director on Scientific Work, Russian Scientific and Research Institute of Rube and Pipe Industry (RosNITI), Chelyabinsk, Russia;

Yatsenko E. A., D. Eng., Prof., Platov South-Russian State Polytechnic University, Novocherkassk, Russia;

Zyuban N. A., D. Eng., Prof., Volgograd State Technical University, Volgograd, Russia.

Foreign members of the editorial council:

Prof. Dr.-Ing. Wolfgang Bleck, Director of IEHK Ferrous Metallurgy Chair and Department of RWTH Aachen, Germany;

Evgeny A. Goli-Oglu, PhD, NLMK DanSteel, Frederiksværk, Denmark;

Dr. Yakov Gordon, Director - Ironmaking Technologies, HATCH, Missisauga, Ontario, Canada;
Prof. Dr.-Ing. Piotr Scheller, Professor of Institute of Iron and Steel Technology of the Technical university "Bergakademie Freiberg", Germany

Тopic Themes:

- Metallurgical innovations
- Ironmaking and steelmaking
- Casting

- Coke and chemical production

- Casting and Foundry production

- Tubemaking

- Heating, heat treatment and refractories

- Metal science and metallography

- Digital technologies
- Rolling
- Coating and surface treatment
- Heat treatment
- Power engineering and environment protection

- Preparation of raw materials
- Physical metallurgy and chemical analysis
- Metal science and chemical analysis
- Metallurgy and automotive industry
- Economics and finances
- Metallurgical history

- Metallurgical news
- Metallurgy and art