Журналы →  CIS Iron and Steel Review →  2013 →  №1 →  Назад

Название Improved design of water-cooled dust precipitation chamber for high-capacity electric steelmaking furnaces
Автор O. M. Glita, A. Z. Ryzhavskiy, M. S. Gontarev.
Информация об авторе

State enterprise «Ukrainian Research & Technology Center of Metallurgical Industry «Energostal» (Kharkov, Ukraine):

O. M. Glita, A. Z. Ryzhavskiy, M. S. Gontarev

E-mail: tgi@energostal.org.ua

Реферат

Peculiarities of removal of dusted technological gases at electric arc furnace during intensification of steel smelting were considered. Purpose, device, operation concept, technical and economical characteristics of operation of water-cooled dust precipitation chamber is described. Analysis of achieved characteristics is done. State enterprise “Ukrainian research and technology center of metallurgical industry “Energostal” (SE “UkrRTC “Energostal”) has realized reconstruction of cooled gas outlet of arc furnace with real charge of 120 t under intensity of oxygen blowing up to 9000 Nm3/h in electric steelmaking shop No. 2 at JSC “Chelyabinsk Iron & Steel Works”. New design of inlet nozzle allowed to avoid slag and dust depositions in it (these depositions earlier were removed manually), to improve environmental conditions in the shop due to almost complete elimination of exhausting of waste gases out of the furnace in the shop under increase of through capacity of gas-escape track. Efficiency of cooled chamber with this design was verified during commissioning test and further operation — chamber operation parameters exceeded design ones. Works for further upgrading of dust precipitation chamber design were carried out based on obtained experience. Development of these type coolers for furnaces of electrical steelmaking shops at certain metallurgical and machine-building enterprises is in sight.

Ключевые слова Electric steelmaking furnace, water-cooled gas outlet, CO afterburning, dust precipitation chamber, cooling, nozzles, gas cleaning
Библиографический список

1. Osipenko V. D., Egorichev A. P., Maksimov B. N. Otvod i obespylivanie gazov dugovykh staleplavilnykh pechey (Outlet and dedusting of gases of arc steelmaking furnaces). Мoscow : Metallurgy, 1985. P. 14–35.
2. Andonyev S. M., Filipyev O. V. Pylegazovye vybrosy predpriyatiy chernoy metallurgii (Dust-gas emissions of ferrous metallurgy enterprises). Мoscow : Metallurgy, 1979. P. 107–114.
3. Tselyh G. V., Koryt'ko N. G., Bedin V. P., Giniyatullin V. K., Tkach T. I. Ustanovka pyleokhladitelnoy vodookhlazhdaemoy kamery gazootvodyashchego trakta DSP (Dust precipitation water-cooled chamber unit of gas-escape track for arc steelmaking furnace). Stal — Steel. 2013. № 3. P. 76–79.

Полный текст статьи Improved design of water-cooled dust precipitation chamber for high-capacity electric steelmaking furnaces
Назад