Журналы →  Obogashchenie Rud →  2015 →  №2 →  Назад

ANALYTICAL METHODS IN BENEFICIATION PROCESSES
Название Improvement of iron ore concentrates pelletizing ability characteristics determination method
DOI 10.17580/or.2015.02.05
Автор Yuryev B. P., Goltsev V. A.
Информация об авторе

Ural Federal University named after the first President of Russia B. N. Yeltsin (Russia):

Yuryev B. P., Ph. D. in Engineering Sciences, Associate Professor, yurev–b@mail.ru

Goltsev V. A., Ph. D. in Engineering Sciences, Associate Professor, v.a.goltsev@urfu.ru

Реферат

Experimental estimate of iron ore concentrates pelletizing ability characteristics determination precision by the existing method was performed, and the ways to improve the method in question were suggested by the examples of Lisakovsky and commercial Kachkanarsky concentrates. In order to find systematic error value, experiments were conducted to determine moisture capacity of loosely filled in (without compaction) Kachkanarsky MCC concentrate. The experimental modifications involved application of columns, differing in design. Influence of the employed method and conditions of determination upon pelletizing ability characteristics precision and systematic error value was shown. It was established, that moisture capacity of material following saturation in special columns (without bottom) significantly increases with respect to height, due to a certain uncontrollable difference in upper and lower layer compaction degree in a column. Such non-uniformity must lead to decrease in effective value of saturation rate coefficient and increase in material average moisture capacity in experiments with minimal compaction. Moisture absorption curve was obtained as a function of time. A series of experiments in Kachkanarsky concentrate saturation in special columns was performed. Recommendations were given with respect to decreasing error in determination of main pelletizing ability characteristics. A method of pelletizing ability characteristics determination using columns with gauze bottoms was recognized to be a preferred option.

Ключевые слова Method, pelletizing ability characteristics, iron ore concentrates, columns, conditions of determination, error, estimate, precision
Библиографический список

1. Prokhorovich V. А., Zaostrovskiy А. N. Increasing of iron ore concentrates water capacity. Vestnik Kuzbasskogo Gosudarstvennogo Tekhnicheskogo Universiteta = Bulletin of Kuzbass State Technical University, 2007, No. 4, pp. 58–59.
2. Trushnikov V. E. Research of chunking ability of microdispersed raw materials from phosphorite grit waste and reject materials, containing phosphorus and magnesium for the purpose of electrothermal fertilizing agents production. Gorny Informatsionno-Analiticheskiy Byulleten = Mining Informational and Analytical Bulletin, 2009, No. 12, pp. 83–90.
3. Lugovskoy N. Yu., Utkov V. А. Options metallurgical processing of iron ore Yakovlev field. Zapiski Gornogo Instituta = Proceedings of Mining Institute, 2013, Vol. 202, pp. 264–265.
4. Korotich V. I. Teoreticheskiye osnovy okomkovaniya zhelezorudnykh materialov (Theoretical foundations of iron ore materials pelletizing). Moscow, Metallurgiya, 1986, 151 p.
5. Vityugin V. M., Vityugin А. V., Berezhnoy N. N., Smirnov V. I. Definition of chunking ability and working humidity of charge for pellet production. Chernaya Metallurgiya. Byulleten Nauchno-Tekhnicheskoy Informatsii = Ferrous Metallurgy. Scientific Information Bulletin, 1973, No. 23, pp. 29–30.

Language of full-text русский
Полный текст статьи Получить
Назад