| Библиографический список |
1. Miller G. L. Tsirkoniy (Zirconium). Translated from English. Moscow : Publishing House of Foreign Literature, 1955. 392 p.
2. Metallurgiya tsirkoniya (Metallurgy of Zirconium). Translated from English. Ed. : G. A. Meerson, Yu. V. Gagarinskii. Moscow : Publishing House of Foreign Literature, 1959. 419 p.
3. Arzhakova V. M., Ziganshin A. G., Popovich V. A. et al. Osobennosti polucheniya mnogokomponentnykh tsirkonievykh splavov na osnove magnietermicheskoy gubki (Peculiarities of obtaining of multicomponent zirconium alloys on the basis of magnesium-thermal sponge). Tsvetnye Metally = Non-ferrous metals. 2009. No. 12. pp. 71–75.
4. Markelov V. A., Shishov V. N., Sablin M. N. et al. Povyshenie plastichnosti i vyazkosti splava E635 dlya silovykh elementov TVS VVER-1000 (Increasing of plasticity and viscosity of E635 alloy for the load-bearing elements of the fuel assemblies VVER-1000). Tsvetnye Metally = Non-ferrous metals. 2010. No. 1. pp. 73–78.
5. Markelov V. A., Novikov V. V., Konkov V. F. et al. Korroziya pod oblucheniem splavov tipa E110 i E635 v usloviyakh vodno-khimicheskogo rezhima PWR (Corrosion under radiation of alloys E110 and E635 in the conditions of water-chemical mode PWR). Tsvetnye Metally = Non-ferrous metals. 2010. No. 3. pp. 79–82.
6. Isaenkova M. G., Perlovich Yu. A., Fesenko V. A. et al. Vliyanie tekhnologicheskikh parametrov obolochechnykh trub na ikh kristallografiches kuyu teksturu (Influence of process parameters of cladding tubes manufacturing on their crystallographic texture). Tsvetnye Metally = Nonferrous metals. 2014. No. 12. pp. 62–67.
7. Perlovich Yu. A., Isaenkova M. G., Fesenko V. A. et al. Vliyanie vysokotemperaturnogo okisleniya na strukturnye i teksturnye osobennosti obolochechnykh trub iz splava Zr – 1% Nb (Influence of high-temperature oxidation on structural and textural peculiarities of cladding pipes, made of Zr – 1 %Nb alloy). Tsvetnye Metally = Non-ferrous metals. 2015. No. 7. pp. 62–67.
8. Zaymovskiy A. S., Nikulina A. V., Reshetnikov N. G. Tsirkonievye splavy v atomnoy energetike (Zirconium alloys in nuclear energy). Moscow : Energoizdat, 1994. 256 p.
9. Rudling P., Strasser A., Garzarolli F. Welding of zirconium alloys: zirats special topic report. А. N. T. International. Available at : https://www.antinternational.com/fileadmin/Products_and_handbooks/IZNA/First_chapter_IZNA_7_STR_Weld.pdf (accessed : 13.06.2016)
10. GOST 29273–92. Svarivaemost. Opredelenie (State Standard 29273–92. Weldability. Definition). Introduced: 1993–01–01. (in Russian)
11. Teoriya svarivaemosti staley i splavov (Theory of weldability of steels and alloys). Under the editorship of E. L. Makarov. Moscow : Publishing House of Bauman State Technical University, 2014. 487 p.
12. Brodskiy A. Ya. Argonodugovaya svarka volframovym elektrodom (Gas tungsten arc welding). Moscow : State Scientific-Technical Publishing House of Mechanical Engineering Literature, 1956. 390 p.
13. Materialy dlya yadernykh reaktorov (Materials for nuclear reactors). Translated from English. Ed. : Yu. N. Sokurskiy. Moscow : Gosatomizdat, 1963. 386 p.
14. Rukovodstvo po payke metallov (Guidance for metal soldering). Translated from English. Ed. : S. I. Lotsmanov. Moscow : Oborongiz, 1960. 192 p.
15. Spravochnik po redkim metallam (Rare metals reference book). Translated from English. Ed. : V. E. Plyushchev. Moscow : Mir, 1965. 946 p.
16. Ferrill D. A. Technical note: fatigue crack propagation in zircaloy-2 weld metal. Welding Journal. 1971. Vol. 50, No. 5. pp. 206-s, 230-s, 234-s.
17. Paton B. G., Gvozdetskiy V. S., Dudko D. A. et al. Mikroplazmennaya svarka (Microplasma welding). Kiev : Naukova dumka, 1979. 248 p.
18. Rivkin E. Yu., Rodchenkov B. S., Filatov V. M. Prochnost splavov tsirkoniya (Durability of zirconium alloys). Moscow : Atomizdat, 1974. 168 p.
19. Gurevich S. M. Svarka khimicheski aktivnykh i tugoplavkikh metallov i splavov (Welding of chemically-active and refractory metals and alloys). Moscow : Mashinostroenie, 1982. 95 p.
20. Ryabov V. R., Rabkin D. M., Kurochko R. S. et al. Svarka raznorodnykh metallov i splavov (Welding of dissimilar metals). Moscow : Mashinostroenie, 1984. 239 p.
21. Kholopov Yu. V. Ultrazvukovaya svarka plastmass i metallov (Ultrasonic welding of plastic and metals). Moscow : Mashinostroenie, 1988. 224 p.
22. Zaymovskiy A. S., Nikulina A. V., Reshetnikov N. G. Tsirkonievye splavy v atomnoy energetike (Zirconium alloys in nuclear energy). Moscow : Energoizdat, 1981. 232 p.
23. Abramovich M. D., Votinov S. N., Ioltukhovskiy A. G. Radiatsionnoe materialovedenie na AES (Radiation materials science on nuclear power plants). Moscow : Energoatomizdat, 1984. 136 p.
24. Konstruirovanie yadernykh reaktorov (Construction of nuclear reactors). Under the editorship of N. A. Dollezhal. Moscow : Energoizdat, 1982. 400 p.
25. Grigorovich Yu. A., Chizhov V. B., Meshcheryakov V. N. et al. Mekhanicheskie svoystva svarnykh soedineniy tsirkonievykh splavov (Mechanical properties of welded joints of zirconium alloys). Svarochnoe proizvodstvo = Welding International. 1988. No. 8. pp. 9–12.
26. Tyurin V. N., Parfenov B. G., Evstyukhin A. I. et al. Issledovanie struktury prevrashcheniy v svarnykh soedineniyakh splavov tsirkoniya s niobiem pri termicheskoy obrabotke (Investigation of transformation structure of zirconium and niobium alloys in welded joints during thermal treatment). Tsirkoniy i ego splavy (Zirconium and its alloys). Moscow : Energoizdat, 1982. pp. 55–70.
27. Gurevich S. M. Spravochnik po svarke tsvetnykh metallov (Non-ferrous metals welding reference book). Kiev : Naukova dumka, 1990. 512 p.
28. Svarka i svarivaemye materialy : v trekh tomakh (Welding and welded materials : in three volumes). Tom 1. Svarivaemost materialov (Volume 1. Materials weldability). Under the editorship of E. L. Makarov. Moscow : Metallurgiya, 1991. 528 p.
29. Svarka. Rezka. Kontrol : spravochnik : v dvukh tomakh (Welding. Cutting. Control : reference book : in two volumes). Vol. 2. Ed. : N. P. Aleshina, G. G. Cherny shova. Moscow : Mashinostroenie, 2004. 480 p.
30. Blashchuk V. E. Tsirkoniy: splavy, svarka, primenenie (obzor) (Zirconium:
alloys, welding, application (review)). Avtomaticheskaya svarka = Automatic Welding. 2005. No. 7. pp. 36–43.
31. Goncharov A. B., Nerodenko M. M., Tkachenko L. M. et al. Vliyanie rezhimov termoobrabotki na strukturu i korrozionnoe razrushenie svarnykh soedineniy splava tsirkoniya s 2,5% niobiya v agressivnykh sredakh (Influence of thermal treatment modes on structure and corrosion failure of welded joints of zirconium alloy with 2.5% of niobium in agressive medium). Svarochnoe proizvodstvo = Welding International. 1990. No. 5. pp. 16, 17.
32. Teoriya, tekhnologiya i oborudovanie diffuzionnoy svarki (Theory, technology and equipment of diffusion welding). Ed. : V. A. Bachin. Moscow : Mashino stroenie, 1991. 352 p.
33. Koh J.-H., Lee J.-W., Jung S.-H. The effect of weld line on the mechanical strengths and its elimination process in the Zr — 4 resistance upset welds. Journal of the Korean Nuclear Society. 1991. Vol. 23, No. 1. pp. 1–11.
34. Goncharov A. B., Polyakov S. G., Onoprienko L. M. et al. Vliyanie struktury na korrozionnoe razrushenie svarnykh soedineniy splava Zr – 2,5%Nb pod napryazheniem (Influence of structure on corrosion failure corrosion failure of welded joints of Zr – 2,5%Nb alloy). Svarochnoe proizvodstvo = Welding International. 1991. No. 3. pp. 14, 15.
35. Komuro K. Welding of zirconium alloys. Welding International. 1994. Vol. 8, No. 2. pp. 141–148.
36. Coleman С. E., Doubt G. L., Fong R. W. L. et al. Mitigation of harmful effects of welds in zirconium alloy components. Proceedings оf “zirconium in the Nuclear Industry: Tenth International Symposium”. Philadelphia, 1994. pp. 264–284.
37. Melyukov V. V. Vliyanie optimalnogo teplovogo rezhima svarki na ostatochnye deformatsii i napryazheniya svarnykh soedineniy splava Zr –2,5%Nb (Influence of optimal thermal welding mode on residual deformations and stresses of welded joints of Zr – 2,5%Nb alloy). Svarochnoe proizvodstvo = Welding International. 1997. No. 2. pp. 2–4.
38. Blashchuk V. E., Polyakov S. G. Korrozionnoe rastreskivanie svarnykh soedineniy tsirkonievogo splava E125 (Corrosion cracking of welded joints of zirconium alloy E125). Avtomaticheskaya svarka = Automatic Welding. 1997. No. 4. pp. 30–33.
39. Blashchuk V. E., Shelenkov G. M., Troyanovskiy V. E. Svarka tsirkonievykh splavov E110 i E125 (Welding of zirconium alloys E110 and E125). Avtomaticheskaya svarka = Automatic Welding. 1997. No. 12. pp. 31–34.
40. Plyshevskiy M. I., Rassoshkina N. S., Semenov A. N. et al. Svarka treniem trub iz splavov Zr – 2,5%Nb (Friction welding of Zr – 2,5%Nb alloy pipes). Svarochnoe proizvodstvo = Welding International. 1999. No. 1. pp. 9–12.
41. Babkin L. T., Sukhov K. K., Sannikov D. V. et al. Germetizatsiya tvelov dlya yadernykh reaktorov metodom kontaktnoy stykovoy svarki (Nuclear reactor fuel rod sealing by resistance butt welding). Svarochnoe proizvodstvo = Welding International. 1999. No. 8. pp. 35–38.
42. Chen S., Yu W., Zee R. H. et al. Creep, thermal-cyclic and tensile properties of Nb – 1Zr to stainless steel transition joints. Journal of Nuclear Materials. 1994. Vol. 212–215, Part B. pp. 1569–1573.
43. Mishra S., Savalia R. T., Bhanumurthy K. et al. Characterisation of metallic glass incorporated Zircaloy-2 weldments. Journal of Nuclear Materials. 1995. Vol. 227, No. 1/2. pp. 122–129.
44. Yang R., Cheng B., Deshon J. et al. Fuel R & D to improve fuel reliability. Journal of Nuclear Science and Technology. 2006. Vol. 43, No. 9. pp. 951–959.
45. Ignatev P. P. Energiya – eto sama zhizn (Energy is a life itself). Novosibirsk : Novosibirsk Chemical Concentration Plant, 2013. 87 p.
46. Bezopasnost pri ekspluatatsii atomnykh stantsiy (Safety of the exploitation of nuclear power plant). Under the editorship of N. N. Davidenko. Moscow: MEPhI, 2007. 168 p.
47. Wheatley S., Sovacool B., Sornette D. Of disasters and dragon kings: a statistical analysis of nuclear power incidents & accidents. Available at : http://arxiv.org/abs/1504.02380v1 (accessed : 13.06.2016)
48. Park N.-G., Park J.-K., Suh J.-M. et al. Structural integrity evaluation of nuclear fuel with reduced welding conditions. Nuclear Engineering And Technology. 2009. Vol. 41, No. 3. pp. 347–354.
49. Review of fuel failures in water cooled reactors. Vienna : International Atomic Energy Agency, 2010. 175 p.
50. Mishra P., Jathar V. P., Singh J. L. et al. In-reactor degradation of fuel and cladding in fuel pins operated with weld defects. Journal of Nuclear materials. 2013. Vol. 439. pp. 217–223.
51. Mashinostroenie. Entsiklopediya. Tom II-3. Tsvetnye metally i splavy. Kompozitsionnye metallicheskie materialy (Mechanical engineering. Encyclopedia. Volume II-3. Non-ferrous metals and alloys. Composite metallic materials). Under the editorship of I. N. Fridlyander. Moscow : Mashinostroenie, 2001. 880 p.
52. Plyshevskiy M. I., Rassoshkina N. S., Semenov A. N. et al. Vliyanie usloviy zashchity pri svarke i kachestva podgotovki poverkhnosti na korrozionnuyu stoykost' svarnykh soedineniy tsirkoniya (Influence of surface preparation and protection conditions during welding on quality and corrosion resistance of welded joints of zirconium). Svarochnoe proizvodstvo = Welding International. 2001. No. 1. pp. 45–48.
53. Sirenko S. A. Issledovanie svarnykh soedineniy kontsevykh detaley tvelov s trubami iz splava Zr1Nb, vypolnennykh razlichnymi vidami svarki (Study of end cap closure for nuclear fuel rods of alloy Zr1Nb, produced different types of welding). Voprosy atomnoy nauki i tekhniki. Seriya : Vakuum, chistye materialy, sverkhprovodniki = Problems of Atomic Science and Technology. Series : Vacuum, Pure Materials, Superconductors. 2003. No. 5 (13). pp. 182–185.
54. Vasilkov V. I., Kislitskiy A. A., Onuchin N. V. et al. O prichinakh obrazovaniya defektov v shvakh iz splava E110, vypolnennykh ELS, i metody borby s nimi (On the causes for formation of defects in welds of E110 alloy made by electron beam welding and methods of controlling them). Avtomaticheskaya svarka = Automatic Welding. 2002. No. 5. pp. 41–43.
55. Oks E. M. Istochniki elektronov s plazmennym katodom: fizika, tekhnika, primeneniya (Plasma Cathode Electron Sources: Physics, Technology, Applications). Tomsk : NTL, 2005. 216 p.
56. Yao M. Y., Zhou B. X., Li Q. et al. The effect of alloying modifications on hydrogen uptake of zirconium-alloy welding specimens during corrosion tests. Journal of Nuclear materials. 2006. Vol. 350. pp. 195–201.
57. Ravi Shankar A., Raju V. R., Narayana Rao M. et al. Corrosion of Zircaloy-4 and its welds in nitric acid medium. Corrosion Science. 2007. Vol. 49. pp. 3527– 3538.
58. Belash N. N., Chernov I. A., Tatarinov V. R. et al. Issledovanie svarnykh soedineniy v perspektivnykh pogloshchayushchikh elementakh energeticheskikh reaktorov (Welded joint in advanced absorber elements of power reactors). Voprosy atomnoy nauki i tekhniki. Seriya : Fizika radiatsionnykh povrezhdeniy i radiatsionnoe materialovedenie = Problems of Atomic Science and Technology. Series : Physics of Radiation Effect and Radiation Materials Science. 2009. No. 4-2 (94). pp. 226–231.
59. Semenov A. N., Plyshevskiy M. I., Gordo V. P. et al. Optimizatsiya formy istochnika nagreva pri elektronno-luchevoy svarke tsirkonievykh trub (Optimization of heating mode during the electron-beam welding of zirconium tubes). Svarochnoe proizvodstvo = Welding International. 2012. No. 1. pp. 22–26.
60. Muransky O., Holden T. M., Kirstein O. et al. Evaluation of residual stresses in electron-beam welded Zr2,5Nb0,9Hf Zircadyne flange mock-up of a reflector vessel beam tube flange. Journal of Nuclear Materials. 2013. Vol. 438. pp. 154–162.
61. Zhang B., Li X., Wang T. et al. Microstructure and corrosion behavior of Zr–702 joined by electron beam welding. Vacuum. 2015. Vol. 121. pp. 159–165.
62. Sidorov I. I., Gradovich A. A., Kislitskiy A. A. et al. Agregat dlya kontaktnoy svarki teplovydelyayushchikh elementov atomnykh reaktorov (Unit for resistance welding of nuclear reactor fuel elements). Avtomaticheskaya svarka = Automatic Welding. 2002. No. 3. pp. 50–52.
63. Setty D. S., Ravinder R. P., Murthy A. L. N. Resistance butt welding of zirconium alloy material. Materials and Manufacturing Processes. 2008. Vol. 23. pp. 844–851.
64. Kim S.-S., Lee J.-W., Park G.-I., Koh J.-H. Development of Zircaloy-4 Endplate Welding Technology for a DUPIC Fuel Bundle Assembly. Journal of Nuclear Science and Technology. 2009. Vol. 46, No. 2. pp. 103–108.
65. Lin Z., Chen F., Liang G. Numerical simulation of residual stress and deformation of special resistance welding of nuclear power zirconium tube. Advanced Materials Research. 2011. Vol. 154/155. pp. 304–309.
66. Kiran Kumar N. A. P., Szpunar J. A., He Z. Microstructural studies and crystallographic orientation of different zones and δ-hydrides in resistance welded Zircaloy-4 sheets. Journal of Nuclear materials. 2011. Vol. 414. pp. 341–351.
67. Park J.-Y., Na T.-H., Lee T.-H. et al. Effect of applied current on the formation of defect in PWR nuclear fuel rods in resistance pressure welding process. Journal of Nuclear Science and Technology. 2015. Vol. 52, No. 5. pp. 748–757.
68. Carr D. G., Ripley M.I., Brown D. W. et al. Residual stress measurements on a stress relieved Zircaloy-4 weld by neutron diffraction. Journal of Nuclear Materials. 2006. Vol. 359. pp. 202–207.
69. Kim S.-S., Lee Ch.-Yu., Yang M. S. Investigation on Nd: YAG laser weldability of Zircaloy-4 end cap closure for nuclear fuel elements. Journal of the Korean Nuclear Society. 2001. Vol. 33, No. 2. pp. 175–183.
70. Une K., Ishimoto S. Crystallographic measurement of the to phase transformation and -hydride precipitation in a laser-welded Zircaloy-2 tube by electron backscattering diffraction. Journal of Nuclear Materials. 2009. Vol. 389. pp. 436–442.
71. Han Q., Kim D., Kim D. et al. Laser pulsed welding in thin sheets of Zircaloy-4. Journal of Material Processing Technology. 2012. Vol. 212. pp. 1116– 1122.
72. Tao W., Cai C., Li L. et al. Pulsed laser spot welding of intersection points for Zircaloy-4 spacer grid assembly. Materials and Design. 2013. Vol. 52. pp. 487–494.
73. Kochergin V., Lerner A., Lyakhov D. et al. Lazernye i opticheskie tekhnologii v proizvodstve komponentov energeticheskikh yadernykh reaktorov (Laser and optical technologies in the production of components of nuclear reactors). Fotonika = Photonics. 2012. No. 4 (34). pp. 22–29.
74. Tereshin E. A., Zhuravlev P. V., Shatunov K. P. et al. Issledovanie vozmozhnosti nerazrushayushchego kontrolya litogo yadra soedineniy distantsioniruyushchikh reshetok teplovizionnym metodom (Investigation of the possibility of non-destruction control of cast nugget of stringer joints by thermal imaging method). Svarochnoe proizvodstvo = Welding International. 2001. No. 4. pp. 54–56.
75. Zuev L. B., Psakh'e S. G., Orishich A. M. et al. Struktura i svoystva svarnykh soedineniy, vypolnennykh lazernoy i tochechnoy svarkoy (Structure and properties of laser- and spot-welded joints). Fizicheskaya mezomekhanika = Physical Mesomechanics. 2005. No. 8. pp. 87–90.
76. Gnyusov S. F., Kiselev A. S., Slobodyan M. S. et al. Formirovanie soedineniya pri tochechnoy mikrosvarke (Formation of joint during the spot microwelding). Svarochnoe proizvodstvo = Welding International. 2005. No. 4. pp. 37–41.
77. Gnyusov S. F., Kiselev A. S., Slobodyan M. S. et al. Vliyanie parametrov rezhima tochechnoy mikrosvarki na strukturu i svoystva soedineniy iz splava E110 (Influence of parameters of microwelding mode on structure and properties of E110 alloy joints). Izvestiya Tomskogo politekhnicheskogo universiteta = Bulletin of the Tomsk Polytechnic University. 2005. Vol. 308, No. 3. pp. 133–139.
78. Gnyusov S. F., Kiselev A. S., Slobodyan M. S. et al. Stabilizatsiya kontaktnykh soprotivleniy pri tochechnoy mikrosvarke (Stabilization of the contact resistances during the spot microwelding). Izvestiya Tomskogo politekhnicheskogo universiteta = Bulletin of the Tomsk Polytechnic University. 2006. Vol. 309, No. 1. pp. 130–133.
79. Slobodyan M. S. Upravlenie svoystvami soedineniy splavov tsirkoniya (Control of the properties of zirconium alloy joints). Tomsk : Publishing House of Tomsk Polytechnic University, 2006. 108 p.
80. Yudina E. V. Metallovedcheskie aspekty sovershenstvovaniya tekhnologii izgotovleniya i kachestva tsirkonievykh izdeliy TVS reaktorov VVER :dissertatsiya … kanddata tekhnicheskikh nauk (Metal science aspects of improvement of manufacturing technology and quality of zircoium products of fuel assembly of VVER reactors : Dissertation … of Candidate of Engineering Sciences). Tomsk, 2007. 235 p.
81. Slobodyan M. S. Stabilizatsiya kachestva soedineniy pri kontaktnoy tochechnoy mikrosvarke detaley iz tsirkonievogo splava E110 : dissertatsiya … kanddata tekhnicheskikh nauk (Stabilization of joints quality during the contact spot microwelding of zirconium alloy E110 details : Dissertation … of Candidate of Engineering Sciences). Barnaul, 2009. 154 p.
82. Plyshevskiy M. I., Tyurin V. N., Semenov A. N. Kompleksnaya otsenka svoystv svarnykh soedineniy trub iz splava tsirkoniya s soderzhaniem 2.5% niobiya, vypolnennykh svarkoy treniem (Property integrated assessment of the friction welded joints of pipes from zirconium alloy containing 2.5% of niobium). Svarochnoe proizvodstvo = Welding International. 2007. No. 8. pp. 35, 36.
83. Semenov A. N., Rivkin E. Yu., Novozhilov S. N. et al. Razrabotka tekhnologii diffuzionnoy svarki napravlyayushchikh kanalov vodo-vodyanogo energeticheskogo reaktora (VVER) (Diffusion welding practices development for guide channels of a water-moderated Voda Voda Energo reactor). Svarochnoe proizvodstvo = Welding International. 2011. No. 5. pp. 23–27.
84. Ahmad M., Akhter J. I., Shaikh M. A. et al. Hardness and microstructural studies of electron beam welded joints of Zircaloy-4 and stainless steel. Journal of Nuclear Materials. 2002. Vol. 301, No. 2/3. pp. 118–121.
85. Neklyudov I. M., Borts B. V., Vanzha A. F. et al. Povyshenie kachestva nerazemnykh soedineniy — put k prodleniyu resursa teplovydelyayushchikh sborok (Improvement of quality of permanent joints E way to prolongation of service life of nuclear fuel assemblies). Avtomaticheskaya svarka = Automatic Welding. 2007. No. 4. pp. 41–45.
86. Prazmowski M. Mechanical properties of zirconium/steel bimetal fabricated by means of explosive welding at varied detonation velocities. Archives of metallurgy and materials. 2014. Vol. 59, No. 3. pp. 1137–1142.
87. Prazmowski M., Paul H. The effect of stand-off distance on the structure and properties of zirconium – carbon steel bimetal produced by explosion welding. Archives of metallurgy and materials. 2012. Vol. 57, No. 4. pp. 1201–1210.
88. Ahmad M., Akhter J. I., Iqbal M. et al. Microstructure and non-equilibrium phases in electron beam-welded joints of Al – Fe – Ce and Zircaloy-4. Journal of Nuclear Materials. 2005. Vol. 341, No. 2/3. pp. 164–168.
89. Spravochnik po payke (Soldering reference book). Under the editorship of I. E. Petrunin. Moscow : Mashinostroenie, 2003. 480 p.
90. Kalin B. A., Fedotov V. T., Sevryukov O. N. et al. Razrabotka i primenenie bystrozakalennykh pripoev dlya pretsizionnoy payki raznorodnykh materialov atomnoy tekhniki (Development and use of hardened solders for precision soldering of dissimilar materials for nuclear technique). Voprosy atomnoy nauki i tekhniki. Seriya : Fizika radiatsionnykh povrezhdeniy i radiatsionnoe materialovedenie = Problems of Atomic Science and Technology. Series : Physics of Radiation Effect and Radiation Materials Science. 2005. No. 5 (88). pp. 150–155.
91. Kalin B. A., Mamedova T. T., Fedotov V. T. et al. Payka splavov tsirkoniya amorfnym bystrozakalennym lentochnym pripoem (Zirconium alloys soldering by amorphous quick-quenched belt solder). Svarochnoe proizvodstvo = Welding International. 2007. No. 10. pp. 10–14.
92. Chen H., Long C., Wei T. et al. Interfacial microstructure and properties of the self-joined Zircaloy-4 joints with Ni foil. Journal of Nuclear Materials. 2014. Vol. 453, No. 1–3. pp. 275–279.
93. Ahmad M., Akhter J. I., Zaman Q. et al. Diffusion bonding of stainless steel to Zircaloy-4 in the presence of a Ta intermediate layer. Journal of Nuclear Materials. 2003. Vol. 317, No. 2/3. pp. 212–216.
94. Akhter J. I., Ahmad M., Ali G. Diffusion bonding of Ti coated Zircaloy-4 and 316-L stainless steel. Materials Characterization. 2009. Vol. 60, No. 3. pp. 193–196.
95. Akhter J. I., Ahmad M., Iqbal M. et al. Formation of dendritic structure in the diffusion zone of the bonded Zircaloy-4 and stainless steel 316L in the presence of Ti interlayer. Journal of Alloys and Compounds. 2005. Vol. 399, No. 1/2. pp. 96–100.
96. Bajgholi M. E., Dehkordi E. H. Vacuum brazing of zirconium-based alloy and 321 stainless steel using titanium based filler metal. Journal of Advanced Materials and Processing. 2012. Vol. 1, No. 2. pp. 51–59.
97. Semenov A. N., Plyshevskiy M. I., Melyukov V. V. et al. Svoystva svarnykh soedineniy iz splava Zr – 2.5%Nb posle elektronno-luchevoy lokalnoy termotsiklicheskoy obrabotki (Properties of Welded Joints of Alloy Zr – 2.5%Nb after Electron-Beam Local Thermocycling). Metallovedenie i termicheskaya obrabotka metallov = Metal Science and Heat Treatment. 2013. No. 12. pp. 34–39.
98. Semenov A. N., Plyshevskiy M. I., Gordo V. P. et al. Primenenie metoda planirovaniya optimalnogo eksperimenta dlya opredeleniya rezhimov TMO svarnykh soedineniy splavov tsirkoniya (Application of the method of design of an optimum experiment to determine the regimes of thermo mechanical treatment of welded joints of zirconium alloys). Metallovedenie i termicheskaya obrabotka metallov = Metal Science and Heat Treatment. 2013. No. 5. pp. 39–43.
99. Savvatimskiy A. I., Korobenko V. N. Vysokotemperaturnye svoystva metallov atomnoy energetiki (tsirkoniy, gafniy i zhelezo pri plavlenii i v zhidkom sostoyanii) (High-temperature properties of nuclear energy metals (zirconium, hafnium and iron during smelting and in liquid state)). Moscow : Publishing House of Moscow Energetic Institute, 2013. 216 p. |
