Журналы →  Gornyi Zhurnal →  2017 →  №5 →  Назад

R&D AND PRODUCTION ADVANCE AT LEBEDINSKY GOK
Название Innovation approach to technical-and-economic assessment of cyclical-and-continuous technology
DOI 10.17580/gzh.2017.05.22
Автор Ismagilov R. I., Efremov Yu. I., Boguslavskaya L. I., Bychkov N. B.
Информация об авторе

Metalloinvest Management Company LLC, Moscow, Russia:

R. I. Ismagilov, Director of Mining and Production Department

 

JSC Lebedinsky GOK, Gubkin, Russia:
Yu. I. Efremov, Director of Investment and Development

 

PiterGORproekt JSC, Saint-Petersburg, Russia:
L. I. Boguslavskaya, Commercial Manager, Candidate of Economic Sciences, L.Boguslavskaya@pitergor.ru
N. B. Bychkov, Deputy Head of Mining Department

Реферат

The decrease in the international demand for the products of mineral mining made the industry to hunt for new methods to enhance operational efficiency and to cut down expenditures. The cyclicaland-continuous technology in open pit mining ensures reduction in the expenditures and gain in the labor productivity as compared with the cyclical technology. The introduction of the cyclicaland-continuous technology will allow Metalloinvest Holding to utilize the recession time for the competency development and will enable increasing capitalization at any stage of economic cycle. For qualitative problem solving, PiterGORproekt company applies its own experience of large plant designing in combination with the modern Western technologies, using SWOT-analysis for technicaland-economic assessment of the project on mining and transportation system efficiency enhancement and optimization at Lebedinsky GOK (Mining and Processing Plant). The executed work shows that the knowledge of key world trends in the area of technology and equipment development and the practical experience of their implementation in fusion with the Western analytical approaches makes it possible to elaborate the most optimal scenario of target development and reconstruction of Ledensky GOK. The innovation approach applied to determining optimal line of the cyclical-and-continuous technology project implementation at Lebedinsky GOK as well as the philosophy of the end-to-end responsibility of the designer – tarting from exploratory design and up to construction design supervision – will allow Metalloinvest Holding to utilize the recession time for the competency development and will enable increasing capitalization at any stage of economic cycle.

Ключевые слова Efficiency, advanced technologies, SWOT-analysis, SWOT-matrix, risk register, economic-andmathematical modeling, target development, cyclical-and-continuous technology, strategic planning
Библиографический список

1. State Standard GOST R 51901.22-2012. Risk management. Risk register. Principles of development. Introduced: 01.12.2013. Moscow : Standartinform, 2014. 20 p.
2. Arutyunova D. V. Strategic management: tutorial. Taganrog : Izdatelstvo TTI YuFU, 2010. 122 p.
3. Korolkova E. M. Risk management: project risks control: tutorial for students whoose special field is economy. Tambov : Izdatelstvo FGBOU VPO «TGTU», 2013. 160 p.
4. Günther Pawellek. Ganzheitliche Fabrikplanung: Grundlagen, Vorgehensweise, EDV-Unterstützung. Translated from German. Moscow : Alpina Publisher, 2016. 366 p.
5. Pokrovskiy A. K. Risk management on industrial and transport enterprises: tutorial. Moscow : KNORUS, 2011. 160 p.
6. Michel Crouhy, Dan Galai, Robert M. Mark. The Essentials of Risk Management. Translated from English. Scientific editor: V. B. Minasyan. Moscow : Izdatelstvo «Yurayt», 2011. 390 p.
7. Mining encyclopedia: in 5 volumes. Chief editor: E. A. Kozlovskiy. Editorial board: M. I. Agoshkov, L. K. Antonenko, K. K. Arbiev et al. Moscow : Sovetskaya entsiklopediya, 1991.
8. Kostina Yu. A. The essence of risk-management system, key components and steps of development. Finansy i kredit. 2011. No. 14(446). pp. 66–70.
9. Nemtsov V. Risk-management of innovation enterprise. Problemy teorii i praktiki upravleniya. 2011. No. 8. pp. 43–48.
10. Kazantsev R. V. Calculation of production capacity of industrial enterprise. Spravochnik ekonomista. 2016. No. 3. pp. 70–78.
11. Panchenko E. S. Work in process management. Spravochnik ekonomista. 2016. No. 11. pp. 35–51.
12. Izosimov S. V., Shevchenko A. L. SWOT-analysis method: its place in investigation methods, advantages and disadvantages. Ekonomika i ekonomicheskie nauki. 2013. No. 2. pp. 29–34.
13. Reicks A. V. Conveyor Models as Quantitative Platforms for Belt Conveyor Energy Options. Bulk Solids Europe, 2012. 10 p.
14. Application Guide for Unit Handling Conveyors, 2nd ed. CEMA, 2016. 688 p.
15. Kayser V., Blind K. Extending the knowledge base of foresight: The contribution of text mining. Technological Forecasting and Social Change. 2017. Vol. 116. pp. 208–215.
16. Tax N., Sidorova N., Haakma R., van der Aalst Wil M. P. Mining local process models. Journal of Innovation in Digital Ecosystems. 2016. Vol. 3, Iss. 2. pp. 183–196.

Полный текст статьи Innovation approach to technical-and-economic assessment of cyclical-and-continuous technology
Назад