Journals →  Gornyi Zhurnal →  2018 →  #5 →  Back

EQUIPMENT AND MATERIALS
ArticleName Influence of corrosion environments on load-bearing capacity of structural parts in mining machines
DOI 10.17580/gzh.2018.05.10
ArticleAuthor Chibukhchyan G. S., Stakyan M. G., Chibukhchyan O. S.
ArticleAuthorData

National Polytechnic University, Erevan, Armenia:

G. S. Chibukhchyan, Candidate for a Master’ Degree, armenpack@mail.ru
M. G. Stakyan, Professor, Doctor of Engineering Sciences
O. S. Chibukhchyan, Candidate for a Master’ Degree

Abstract

The article addresses the issues connected with the corrosion fatigue of mining machines subjected to climatic effects and varied complex loading (joint cyclic bending and twisting). According to the results of fatigue tests of steel samples under conditions as close as possible to the real-life environment, the data required to adjust periods of life and reconditioning of damaged parts and components in mining machines are obtained. The strength and longevity coefficients are proposed for the quantitative evaluation of various factors influencing corrosion fatigue resistance of equipment. The change in these coefficients depending on the single and combined effect of several factors (loading regime, stress concentration, pH, anticorrosion coating) is studied. The values of the coefficients for estimating load-bearing capacity of parts and adjusting service life of machines are obtained.

keywords Mining machines, corrosion fatigue, shafts, vehicles, strength, longevity
References

1. Oleinik N. V., Volchev A. V., Bershak S. V., Vasiliev N. R. Corrosion fatigue calculation of parts. Kiev : Tekhnika, 1990. 150 p.
2. Zaikov V. I., Berlyavskii G. P. Operation of mining machines and equipment. Fourth edition. Moscow : Izdatelstvo Moskovskogo gosudarstvennogo gornogo universiteta, 2006. 257 p.
3. Principles of operation of mining machines and equipment : Study guide. Ed.: Gilev A. V. Krasnoyarsk : Izdatelstvo Sibirskogo federalnogo universiteta, 2011. 276 p.
4. Shabanov A. A., Velikanov V. S. A review of research and future directions in the provision of ergonomic design of mining machines and systems. Vestnik of Kuzbass State Technical University. 2013. No. 6. pp. 46–50.
5. Shadrin A. I., Orkhon L. Dependence of Baganursky Mine excavator excavator reliability index on lifetime. Proceedings of the Siberian Department of the Section of Earth Sciences of the Russian Academy of Natural Sciences. Geology, Exploration and Development of Mineral Deposits. 2014. No. 1(44). pp. 61–65.
6. Andreeva L. I., Krasnikova T. I. Service reliability control of cycle operation excavators in different working environment. Gornyi zhurnal Kazakhstana. 2014. No. 4. pp. 28–32.
7. Kushnarev L. I., Chepurina E. L., Chepurin A. V., Kushnarev S. L. Quality and reliability of domestic machinery – Basis of its competitive ability. Traktory i selkhozmashiny. 2015. No. 11. pp. 35–37.
8. Platonova E. S. Improved corrosion resistance machine parts. Bulletin of Perm National Research Polytechnic University. Machanical Engineering, Materials Science. 2015. Vol. 17, No. 3. pp. 41–46.
9. Zhaglovskaya A. V., Savon D. Yu., Safronov А. Е., Sidorova E. Yu. Production activity analysis methodology for open pit coal mines (in terms of Shestaki open pit mine). Eurasian Mining. 2017. No. 1. pp. 14–16. DOI: 10.17580/em.2017.01.04
10. Zhang W., Cai Q., Chen S. Optimization of transport passage with dragline system in thick overburden open pit mine. International Journal of Mining Science and Technology. 2013. Vol. 23, Iss. 6. pp. 901–906.
11. Tiwari R., Knowles J., Danko G. Bucket trajectory classification of mining excavators. Automation in Construction. 2013. Vol. 31. pp. 128–139.
12. Attaway S. MATLAB: A practical introduction to programming and problem solving. 4th ed. Oxford : Butterworth-Heinemann, 2017. 574 p.
13. Korolov V., Vysotskii Y. B., Filatov Y. V., Gibalenko A. N. Design criteria of reliability and safety in the design of corrosion protection of structural steel. Improving materials durability: from cultural heritage to industrial applications: EUROCORR-2014 The European Corrosion Congress. Pisa, 2014.
14. Yurkinskiy V. P., Baturova L. P., Firsova E. G. Corrosion resistance of stainless steels in NaOH melt. Chernye Metally. 2014. No. 4. pp. 73–77.
15. Surov O. E., Kompanets V. A. Investigation of the features of corrosion destruction of 09Г2 steel plates for the outer shell plating in ship ice belt. Chernye Metally. 2015. No. 10. pp. 39–45.
16. Praca M. S., Uehara S., Ferreira M. New polymeric coating on sputtered bearings for heavy duty diesel engines. SAE International Journal of Engines. 2013. Vol. 6, No. 1. pp. 623–628.
17. Stakyan M. G., Mirakyan G. G., Margaryan E. A. Equations of shaft corrosion fatigue curves with regard to dispersion analysis of cycle lives. Bulletin of the National Academy of Sciences of Armenia and Armenia State Engineering University. Series of Engineering Sciences. 2010. Vol. 63, No. 1. pp. 12–18.
18. Vagapov R. D. Probabilistic-deterministic fatigue mechanics. Moscow : Nauka, 2003. 254 p.
19. Kogaev V. P. Strength calculation and time-variable stresses. Moscow : Mashinostroenie, 1977. 232 p.
20. Olejnik N. V., Stakyan M. G., Volchev A. V., Manukyan G. A. Device for fatigue testing in corrosive atmospheres. Patent USSR, No. 1317329. Applied: 01.02.1985. Published: 15.06.1987. Bulletin No. 22.

Language of full-text russian
Full content Buy
Back