Journals →  Gornyi Zhurnal →  2018 →  #8 →  Back

DESIGNING AND MINING-CONSTRUCTIONS WORK
ArticleName Optimization of frozen wall formation in shaft construction
DOI 10.17580/gzh.2018.08.06
ArticleAuthor Golovaty I. I. Levin L. Yu., Parshakov O. S., Diulin D. A.
ArticleAuthorData

Belaruskali, Soligorsk, Belarus:

L. Yu. Levin, Head of Department, Doctor of Engineering Sciences

O. S. Parshakov, Junior Researcher

 

Mining Institute, Ural Branch, Russian Academy of Sciences, Perm, Russia:
I. I. Golovaty, Chief Executive Officer

JSC “Trest Shahtospecstroy”, Soligorsk, Belarus:
D. A. Diulin, Chief Executive Officer

Abstract

The article presents an intelligent system introduced to control condition of frozen walls at the shafting site of Petrikovsky Mining and Processing Plant of Belaruskali. The basic methods to determine temperatures in rock mass under artificial freezing are described. It is shown that the use of the modern innovative technologies and calculation techniques greatly improves quality of freezing and, if required, allows adjustments and optimizations. It is found that for the conditions of shaft no. 1 under construction at Petrikovsky Mining and Processing Plant, on the transition to passive freezing, frozen wall thickness steadily grows. The objective of frozen wall formation optimization is to control freezing equipment of mining shafts under construction at minimized cost of material, financial and human resources, as well as at mining safety. The energy-efficient mode of operation of freezing plants in the shaft under construction is determined analytically so that the project parameters (integrity and thickness) of the frozen wall are preserved till the shaft construction completion with respect to the decrease in the rock mass refrigeration capacity. A nonstationary Stefan problem is solved for the case of a set of freezing wells. It is emphasized that in designs of mining shaft construction with artificial freezing, the choice of cooling plants should be based on the wide-range adjustability of temperature of a cooling agent, which is directly governed by engineering specification of refrigerating units. The authors show that deployment of intellectual monitoring provides both safety of mining and improvement of engineering-and-economic performance of shaft construction.
The study was supported by the Russian Science Foundation, Project No. 17-11-01204.

keywords Frozen wall, rock mass, artificial freezing, temperature field, mine shaft, control system, Stefan problem, engineering-and-economic performance
References

1. Trupak N. G. Freezing of Rocks during Shafting. Moscow : Ugletekhizdat, 1954. 896 p.
2. Trupak N. G. Soil Freezing in Underground Mine Construction. Moscow : Nedra, 1974. 281 p.
3. Dolgov O. A. Method to calculate deep freezing of rocks during mine shafting. Freezing of Rocks during Shafting. Moscow, 1961. pp. 9–64.
4. Parshakov O. S. Method to control formation and condition of frozen wall in mining shafts. Strategy and Processes of Geo-Resources Management: Collection of Scientific Papers. Perm : GI UrO RAN. 2017. Iss. 15. pp. 288–292.
5. Levin L. Yu., Semin M. A., Parshakov O. S., Kolesov E. V. Method of an inverse Stefan problem solution to control frozen wall condition during mine shafting. Vestnik PNIPU. Geologiya. Neftegazovoe i gornoe delo. 2017. Vol. 16, No. 3. pp. 255–267.
6. Hansson K., Simunek J., Mizoguchi M., Lundin L.-C., van Genuchten M. T. Water flow and heat transport in frozen soil. Vadose Zone Journal. 2004. Vol. 3(2). pp. 693–704.
7. Kurylyk B. L., Watanabe K. The mathematical representation of freezing and thawing processes in variably-saturated, non-deformable soils. Advances in Water Resources. 2013. Vol. 60. pp. 160–177.
8. Rose M. An implicit enthalpy scheme for one-phase Stefan problems. Journal of Scientific Computing. 1990. Vol. 5(2). pp. 169–185.
9. Alifanov O. M. Inverse Heat Transfer Problems. Berlin : Springer-Verlag, 1994. 345 p.
10. Kabanikhin S. I., Hasanov A., Penenko A. V. A gradient descent method for solving an inverse coefficient heat conduction problem. Numerical Analysis and Applications. 2011. Vol. 1(1). pp. 34–45.
11. Zhou M. M., Meschke G. A. three-phase thermo-hydro-mechanical finite element model for freezing soils. International Journal for Numerical and Analytical Methods in Geomechanics. 2013. Vol. 37. pp. 3173–3193.
12. Vitel M., Rouabhi A., Tijani M., Guerin F. Modeling heat transfer between a freeze pipe and the surrounding ground during artifi cial ground freezing activities. Computers and Geotechnics. 2015. Vol. 63. pp. 99–111.
13. Tim van Heyden, Bjarn Vegner. Modern shaft freezing technology implemented in two big shaft sinking projects with total 5 surface mine shafts are being constructed. Gornyi Zhurnal. 2014. No. 9. pp. 65–69.
14. Vabishchevich P. N., Vasilieva M. V., Gornov V. F., Pavlova N. V. Mathematical modeling of artificial freezing of soil. Vyshislitelnye tekhnologii. 2014. Vol. 19, No. 4. pp. 19–31.
15. Levin L. Yu., Semin M. A., Parshakov O. S. Mathematical prediction of frozen wall thickness in shaft sinking. Journal of Mining Science. 2017. Vol. 53, No. 5. pp. 938–944.
16. Alzoubi M. A., Sasmito A. P., Madiseh A., Hassani F. P. Intermittent Freezing Concept for Energy Saving in Artificial Ground Freezing Systems. Energy Procedia. 2017. Vol. 142. pp. 3920–3925.
17. Pimentel E., Papakonstantinou, S., Anagnostou, G. Numerical interpretation of temperature distributions from three ground freezing applications in urban tunneling. Tunnelling and Underground Space Technology. 2012. Vol. 28, No. 1. pp. 57–69.

Full content Optimization of frozen wall formation in shaft construction
Back