Журналы →  Chernye Metally →  2021 →  №3 →  Назад

Название Development of technology for production of K52 strength class steels with low chromium content, cold and corrosion resistant in conditions of the casting and rolling complex
DOI 10.17580/chm.2021.03.02
Автор V. V. Naumenko, E. S. Mursenkov, A. V. Muntin
Информация об авторе

Vyksa Steel Works (Vyksa, Russia):

V. V. Naumenko, Cand. Eng., Head of Dept., e-mail: naumenko_vv@vsw.ru
E. S. Mursenkov, Chief Specialist


Bauman Moscow State Technical University (Moscow, Russia):
A. V. Muntin, Cand. Eng., Associate Prof.


The results of experimental testing of production in the conditions of a casting and rolling complex (CRC) Vyksa Steel Works (VSW) of rolled products with a thickness of 8–10 mm with a reduced chromium content of strength class K52 to meet the requirements of the new guidelines of Rosneft on the corrosion resistance of metal in acidic environments. Based on the C–Mn–Si–Nb alloying system, a new chemical composition of steel with a reduced chromium content (0,40%) has been developed that provides a set of consumer properties — strength (tensile strength — 530–550 MPa, yield strength — 450–470 MPa), ductility (elongation — 28–34%), cold resistance (T50 below –80°C) and corrosion resistance against hydrogen cracking (CLR = 0%, CTR = 0%) and general corrosion in a CO2-containing medium (the rate of general corrosion is not more than 0,2 mm/year). It is shown that the variation of the chromium content in the range of 0,4–0,7% does not significantly affect the rate of general corrosion both under the influence of 5% sodium chloride solution and 5% sodium chloride solution with the addition of 0,40% sodium acetic acid solution when kept in an aggressive environment for 96 hours.

Ключевые слова Сasting and rolling complex (LPC), low-carbon microalloyed steels, strength properties, impact strength, corrosion resistance, microstructure
Библиографический список

1. GOST 20295–85. Steel welded pipes for main gas-and-oil pipelines. Specifications. Introduced: 01.01.1987.
2. Kudashov D. V., Semernin G. V., Peyganovich I. V., Efron L. I., Stepanov P. P. et. al. Modern high-tech 05KhGB steel intended for production of electrowelded oil and gas pipes of increased operational reliability. Burenie i neft. 2016. No. 5. pp. 48–53.
3. Kudashov D. V. Novel 05KhGB pipe steel on guard of reliability of oil and gas pipelines. Territoriya neftegaz. 2015. No. 11. pp. 126, 127.
4. Kudashov D. V., Peyganovich I. V., Stepanov P. P. et. al. Modern high-tech 05KhGB steel designed for manufacture of welded oil and gas pipelines of high resistance to hydrogen sulfide and carbon dioxide corrosion. Development of technologies for production of steel, rolled products and pipes on the Vyksa production site: Collection of works. Moscow: Metallurgizdat, 2016. pp. 293–305.
5. Rodionova I. G., Mitrofanov А. V., Tikhonov S. М. et. al. Severkor is a modern rolled product for oilfield pipelines. Inzhenernaya praktika. 2017. No. 12. pp. 38–44.
6. Kichigina N. А., Komissarov А. А., Ionov S. М. et. al. Field tests of pipes made of Severkor rolled products with increased corrosion resistance. Inzhenernaya praktika. 2020. No. 5-6. pp. 54–59.
7. Mursenkov Е. S., Kudashov D. V., Kislitsa V. V. Et. al. Features of technology of modification by calcium and cerium of pipe steels resistant in H2S environments. Metallurg. 2018. No. 10. pp. 27–35.
8. Efron L. I. Metal science in “big” metallurgy. Pipe steels. Moscow: Metallurgizdat, 2012. 696 p.

9. Komissarov А. А., Sokolov P. Yu., Tikhanov S. М., Sidorova Е. P., Mishnev P. А. et. al. Metal-physical features of manufacture of lowcarbon rolled products for oilfield pipes. Stal. 2018. No. 11. pp. 57–62.
10. Muntin А. V., Rybkin N. А., Chervonny А. V. et. al. Development of technology for production of cold-resistant K42-K60 strength rolled products for pipes in conditions of the casting and rolling complex. Development of technologies for production of steel, rolled products and pipes on the Vyksa production site: Collection of works. Moscow: Metallurgizdat, 2016. pp. 274–292.
11. GOST 1497–84. Metals. Methods of tension test. Introduced; 01.01.1986.
12. GOST 9454–78. Metals. Method for testing the impact strength at low, room and high temperature. Introduced: 01.01.1979.
13. NACE TM 0284–2016. Test method. Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced corrosion. Introduced: 01.01.2016.
14. GOST 5639–82. Steels and alloys. Methods for detection and determination of grain size. Introduced: 01.01.1983.
15. Kholodny А. А., Matrosov Yu. I., Matrosov М. Yu. et. al. Influence of carbon and manganese on resistance of low-carbon pipe steels to hydrogen-induced cracking. Metallurg. 2016. No. 1. pp. 54–59.
16. Hara T., Asahi H., Ogawa H. Conditions of Hydrogen-induced Corrosion Occurrence of X65 Grade Line Pipe steels in Sour Environments. Corrosion. 2004. Vol. 60, Iss. 12. pp. 1113–1121.
17. Carneiro R. A., Ratnapuli R. C. The influence of chemical сomposition and microstructure of API linepipe steels on hydrogen induced cracking and sulfide stress corrosion cracking. Materials Science and Engineering A. 2003. Vol. 357. pp. 104–110.
18. Naumenko V. V., Muntin А. V., Baranova О. А. et. al. Study of the effect of heat treatment on mechanical properties and resistance of structural steel to cracking in the hydrogen sulfide environment. Chernye Metally. 2020. No. 6. pp. 56–61.

Language of full-text русский
Полный текст статьи Получить