Journals →  Chernye Metally →  2021 →  #3 →  Back

ArticleName Adjustment of parameters of precision stamping of gear wheels on results of modeling of physical processes at their chemical and thermal processing
DOI 10.17580/chm.2021.03.06
ArticleAuthor V. G. Shibakov, D. L. Pankratov, R. V. Shibakov, R. S. Nizamov

Naberezhnye Chelny Institute (branch) of Kazan (Privolzhsky) Federal University (Naberezhnye Chelny, Russia):

V. G. Shibakov, Dr. Eng., Prof., Head of Mechanical Engineering Dept.
D. L. Pankratov, Dr. Eng., Prof., Director of the higher engineering school
R. V. Shibakov, Cand. Eng., Associate Professor
R. S. Nizamov, Graduate Student, e-mail:


R. A. Khairullin, graduate student of the Naberezhnye Chelny Institute of KFU, took part in the work.


The surface layer after chemical-thermal treatment in structure and physico-mechanical properties differs sharply from the inner layers of the product, which leads to significant internal stresses that cause deformation and warping, i.e. resizing and shape. Prediction of the phase composition, depth of carbon saturation of the layer, microhardness and deformation of the surface of the product elements after chemical-thermal treatment based on modeling in the application package allows even at the stage of technological preparation for the production of precision hot die forging to make adjustments to the geometry of the die tool to increase dimensional accuracy, and accordingly, the durability of the gear ring gears. The input data for modeling the processes of chemical-thermal treatment is a 3D model of the product with a finite element grid and the fixation scheme of the product, temperature and time modes (heating temperature, heating and cooling rate, holding time, number of cycles), type of carburizing cooling medium and its temperature, material details.

keywords Hot precision stamping, gear wheels, die tools, chemical heat treatment, modeling

1. Technical regulations No. 8504 of Daido Steel Co., LTD (Germany). New steels used in the automotive industry, 2015. 165 p.
2. Zhang Q., Zhang B., Li R., Ma L. Advances in theory and technology for microscopic surface quality control of steel strip. Journal of Mechanical Engineering. 2016. Vol. 52, Iss. 10. pp. 32–45.
3. Witold W. Aussteniete Transformation Kinetics of Ferrous Alloys. Climax Molibdenium Company, Grunwich. 2015. p. 84.
4. Venturato G., Ghiotti A., Bruschi S. Influence of temperature and friction on the 22MnB5 formability under hot stamping conditions. AIP Conference Proceedings: International ESAFORM Conference on Material Forming. 2018. Vol. 1960. pp. 150–156.
5. Astashenko V. I., Olovyanishnikov V. А., Shveev А. I., Shveeva Т. V. Metal quality control of cemented toothed parts according to advanced criteria. Tekhnologiya metallov. 2014. No. 8. pp. 31–37.
6. Shibakov V. G., Pankratov D. L., Shibakov R. V., Nizamov R. S. Features of the formation of service properties of gears obtained by precision stamping. Chernye Metally. 2020. No. 7. pp. 40–45.
7. Rozhkov I. I., Mylnikov V. V. Calculation of internal residual stresses arising in hardened machine parts after chemical heat treatment. Mezhdunarodny zhurnal eksperimentalnogo obrazovaniya. 2014. No. 1-2. pp. 114–118.
8. Hibbe P., Hirt G. Analysis of the bond strength of voids closed by open-die forging. International Journal of Material Forming. 2020. Vol. 13, Iss. 1. pp. 117–126.
9. Peterson R. E. Discussion of a century ago concerning the nature of fatigue, and reviews of zone of subsequent researches concerning mechanism of fatigue. Bulletin of the American Society for testing and Materials. 1990. Vol. 164. pp. 50–56.
10. Belur B. K., Grandhi R. V. Geometric deviations in forging and cooling operations due to process uncertainties. Journal of Materials Processing Technology. 2004. Vol. 152, Iss. 2. pp. 204–214.
11. Astashchenko V. I., Shibakov V. G. Technological methods for control of structure formation of steel at production of car parts. Moscow: Academia, 2006. 328 p.
12. GOST 5639–82. Steels and alloys. Methods for detection and determination of grain size. Introduced: 01.01.1983.
13. GOST 9013–59. Metals. Method of measuring Rockwell hardness. Introduced: 01.01.1969.
14. GOST 2999–75. Metals and alloys. Vickers hardness test by diamond pyramid. Introduced: 01.07.1976.
15. Shibakov V. G., Astashchenko V. I., Soloveychik S. S. et. al. Heredity of macro- and microstructure in steel billets of machine parts. International. scientific collection “Equipment and technology of heat treatment of metals and alloys”. 2007. Vol. 1. pp. 117–122.
16. Simonova L. А., Gavarieva К. N. Development of a knowledge database for a system of fuzzy logic inference of the precision stamping process. Nauchno-tekhnicheskiy vestnik Povolzhya. 2020. pp. 62–64.

Language of full-text russian
Full content Buy