Журналы →  Non-ferrous Metals →  2021 →  №1 →  Назад

AUTOMATION
To 60th Anniversary of Branch of the National Research University Moscow Power Engineering Institute in Smolensk (Smolensk branch of MPEI)
Название Simulation of induction motors with energy recuperation for lifting mechanisms of non-ferrous metallurgy enterprises
DOI 10.17580/nfm.2021.01.10
Автор Rozhkov V. V., Krutikov K. K., Fedulov A. S., Fedotov V. V.
Информация об авторе

Branch of the National Research University “Moscow Power Engineering Institute”, Smolensk, Russia:

V. V. Rozhkov, Candidate of Engineering Sciences, Assistant Professor, Head of the Department of Electromechanical Systems, e-mail: umo@sbmpei.ru
K. K. Krutikov, Candidate of Engineering Sciences, Assistant Professor, Department of Fundamentals of Electrical Engineering, e-mail: krutikov-kk@yandex.ru
A. S. Fedulov, Doctor of Engineering Sciences, Professor, Head of the Department of Computer Engineering, e-mail: fedulov_a@mail.ru
V. V. Fedotov, Student, Department of Electromechanical Systems, e-mail: fedotovvladimirv@yandex.ru

Реферат

The paper analyzes two promising variants of an energy-saving electric drives for lifting mechanisms of non-ferrous metallurgy enterprises. As the first variant, a variable-frequency asynchronous electric drive with active rectifier according to a modified main circuit is proposed. The second one is an asynchronous electric drive with pulse control in a rotary circuit and a network-driven inverter. There is shown an expediency of applying the suggested options for electric drives of lifting mechanisms, the load of which is an active moment, and the lowering and lifting modes in a work cycle are equal in time. Computer simulation models for the considered variants have been developed in MatLab software package; transients in electric drives for typical cycle execution of lifting mechanisms have been analyzed and compared for each variant. A qualitative and quantitative comparison of dynamic processes in electric drives, their power modes and the resulting energy efficiency has been carried out.

The work was carried out according to the State task, project No. FSWF-2020-0019.

Ключевые слова Asynchronous electric drives of lifting mechanisms, general-purpose electric cranes, metallurgical cranes, active rectifier, pulse control, recuperation, active filtering, invert conversion, energy efficiency, computer simulation
Библиографический список

1. Ilyinsky N. F., Moskalenko V. V. Electric Drive: Energy and Resource Saving. Moscow : Akademiya, 2008. 201 p.
2. Report on the Functioning of the UES of Russia in 2019. URL: https://www.so-ups.ru/fileadmin/files/company/reports/disclosure/2020/ups_rep2019.pdf (Access data: 29.12.2020).
3. Rozhkov V. V., Fedotov V. V. Improving the Properties and Characteristics of Avariable-Frequency Drive with an Active Rectifier. 2020 International Russian Automation Conference (RusAutoCon). pp. 903–907. DOI: 10.1109/RusAutoCon49822.2020.9208030.
4. Krutikov K. K., Rozhkov V. V. Application of Multifunctional Power Active Filters as Part of a Powerful Variable-Frequency Electric Drive. Elektrichestvo. 2011. No. 2. pp. 32–38.
5. Maklakov A. S. Analysis of PWM Boost Rectifier in Modes of Reactive Power Compensation. Russian Internet Journal of Industrial Engineering. 2013. No. 1. pp. 43–50.
6. IEEE Standard 519-2014. IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems. Published Date: 2014-06-11.
7. Danilov P. E., Baryshnikov V. A., Rozhkov V. V. Theory of Electric Drive : a Textbook. Moscow; Berlin : Direct-Media, 2018. 416 p.
8. Abrosov Ya. A., Danilov P. E., Baryshnikov V. A. On the Prospects for the Development of Modern Crane Electric Drives. Problems and Prospects for the Development of Energy, Electrical Engineering and Energy Efficiency: Materials of the III International Scientific and Technical Conference. Cheboksary: Izdatelstvo Chuvashskogo Univer siteta, 2019. pp. 322–328.
9. Meshcheryakov V. N. Electric Drive Systems with an Induction Motor with a Phase-Wound Rotor : a Textbook. Lipetsk : LGTU, 1999. 80 p.

10. Fomin I. N. The Frame Approach for Systematization Computational Models of Power Supply. Journal of Applied Informatics. 2016. Vol. 11, No. 2. pp. 99–106.
11. Gnatyuk V. I., Sheynin A. A. Determinig the Optimal Rates of Electrical Power Consumption. Journal of Applied Informatics. 2014. No. 3. pp. 68–78.
12. Plakhtii O., Nerubatskyi V. Analyses of Energy Efficiency of Interleaving in Active Voltage-Source Rectifier. 2018 IEEE 3rd International Conference on Intelligent Energy and Power Systems (IEPS). pp. 253–258. DOI: 10.1109/IEPS.2018.8559514.
13. Straka M., Blahnik V., Pittermann M. Verification of Control Behaviour of Three-Phase Voltage-Source Active Rectifier with Vector Control. 2020 International Conference on Applied Electronics (AE). pp. 1–4. DOI: 10.23919/AE49394.2020.9232705.
14. Blahnik V., Peroutka Z., Molnar J., Michalik J. Control of Primary Voltage Source Active Rectifiers for Traction Converter with Medium-Frequency Transformer. 13th International Power Electronics and Motion Control Conference, 2008. pp. 1535–1541. DOI: 10.1109/EPEPEMC.2008.4635485.
15. Cornic D. Efficient Recovery of Braking Energy through a Reversible DC Substation. Electrical Systems for Aircraft, Railway and Ship Propulsion. 2010. 11700008. DOI: 10.1109/ESARS.2010.5665264.
16. Dujic D., Zhao C., Mester A., Steinke J., Weiss M., Lewdeni-Schmid S., Chaudhuri T., Stefanutti P. Power Electronic Traction Transformer-Low Voltage Prototype. IEEE Transactions on Power Electronics. 2013. Vol. 28, Iss. 12. pp. 5522–5534.
17. Filote C., Ciufudean C., Alaei S., Cozgarea A. M. Harmonic Elimination and Power Factor Improvement of Three-Phase Rectifier Using RNSIC Variant. 2011 International Conference on Clean Electrical Power (ICCEP). 12304548. DOI: 10.1109/iccep.2011.6036326
18. Grinberg R., Canales F., Paakkinen M. Comparison Study of Full-Bridge and Reduced Switch Count Three-Phase Voltage Source Inverters. 7th International Conference-Workshop Compatibility and Power Electronics (CPE), 2011. pp. 270–275.
19. Heldwein M. L., Mussa S. A., Barbi I. Three-Phase Multilevel PWM Rectifiers Based on Conventional Bidirectional Converters. IEEE Transactions on Power Electronics. 2010. Vol. 25, Iss. 3. pp. 545–549.
20. Kwak S., Toliyat H. A. Design and Rating Comparisons of PWM Voltage Source Rectifiers and Active Power Filters for AC Drives With Unity Power Factor. IEEE Transactions on Power Electronics. 2005. Vol. 20, Iss. 5. pp. 1133–1142.
21. Luo X., Wang J., Dooner M., Clarke J. Overview of Current Development in Electrical Energy Storage Technologies and the Application Potential in Power System Operation. Applied Energy. 2015. Vol. 137. pp. 511–536.
22. Pena-Alzola R., Liserre M., Blaabjerg F., Sebastián R., Dannehl J., Fuchs F. W. Analysis of the Passive Damping Losses in LCL-Filter-Based Grid Converters. IEEE Transactions on Power Electronics. 2013. Vol. 28, Iss. 6. p. 2642–2646.
23. Santarius P., Tlusty J., Valouch V. Harmonic Voltage Mitigation Power Systems by Using Cooperative Control of Active Power Filters Without Mutual Communication. 2008 IEEE International Conference on Industrial Technology. 10179543. DOI: 10.1109/icit.2008.4608429.
24. Takahashi H., Aoki K., Maoka A., Kim Y. I. Current and Future Applications for Regenerative Energy Storage System. Hitachi Review. 2012. Vol. 61, No. 7. pp. 336–340.
25. Zhai H., Zhuo F., Zhu C., Yi H., Wang Z., Tao R., Wei T. An Optimal Compensation Method of Shunt Active Power Filters for System-Wide Voltage Quality Improvement. IEEE Transactions on Industrial Electronics. 2020. Vol. 67, Iss. 2. pp. 1270–1281.
26. Zhang Y., Xie W., Zhang Y. Deadbeat Direct Power Control of Three-Phase Pulse-Width Modulation Rectifiers. IET Power Electronics. 2014. Vol. 7, Iss. 6. pp. 1340–1346.
27. Zhang Y., Qu C. Direct Power Control of a Pulse Width Modulation Rectifier Using Space Vector Modulation Under Unbalanced Grid Voltages. IEEE Transactions on Power Electronics. 2015. Vol. 30, Iss. 10. pp. 5892–5901.

Полный текст статьи Simulation of induction motors with energy recuperation for lifting mechanisms of non-ferrous metallurgy enterprises
Назад