Journals →  Chernye Metally →  2021 →  #6 →  Back

Machine-building technologies
ArticleName Formation of a mesh of spiral wedge protrusions on the inner surface of a steel shell by local plastic deformation
DOI 10.17580/chm.2021.06.12
ArticleAuthor V. D. Kukhar, V. A. Korotkov, S. S. Yakovlev, A. A. Shishkina

Tula State University (Tula, Russia):

V. D. Kukhar, Dr. Eng., Prof., Head of the Dept. of Theoretical Mechanics, e-mail:
V. A. Korotkov, Cand. Eng., Associate Prof.
S. S. Yakovlev, Post-graduate Student
A. A. Shishkina, Student


Manufacture of shells with a mesh of rhombic ribbings is a complex technological task, for the solution of which it is possible to use cutting operations, electrochemical methods, laser technologies, however, all of the above methods are ineffective. Methods of processing metals by forming are also used, among which the most common is reduction. An alternative method is the local deformation of a cylindrical workpiece with a tool with a working mandrel, on which there are spiral wedge protrusions. For this, a device is used in which the working mandrel with protrusions has the ability to move along the formed cylindrical shell and make a rotational movement around an axis. Rifling with multi-start spiral riffles can be carried out using a working mandrel with a different shape of the lead-in geometry of spiral wedge protrusions and their height on its working surface, therefore, the substantiation of the shape and size of the spiral wedge protrusions is an important and urgent task.
The work was carried out within the framework of the grant of the Government of the Tula region in the field of science and technology No. DS / 167.

keywords Rifling, riffles mesh, local deformation, steel, load, cylindrical shell, technological force, wedge protrusions, gap size

1. Stebunov S., Biba N., Lishny A., Jiao L. Practical implementation of numerical modeling to optimization of extrusion die design for production of complex shape profiles. Aluminium Extrusion and Finishing. 2013. No. 4. pp. 20–24.
2. Patent Application Publication Wilhelm et al. US 2010/0224093 A1Partial fragmentation bullet. Ralph Wilhelm, Hannover (DE); Klaus Ripperger, Isernhagen (DE).
3. United States Patent Emary US 2016/0273896 A1 Bullet with controlled. Hornady manufacturing company, Grand Island, NE (US).
4. United States Patent Gold US 8627771 B1 Selectable fragment size. Vladimir M. Gold, Hillside, NJ (US).
5. United States Patent US9738947B1 Fragmentation device with increased surface hardness and a method of producing the same / Nishkamraj U. Deshpande, Scheid E., James E. Schwabe.
6. Necpal M., Kapustova M., Martinkovič M. Using 2D/3D FEM simulation to determine drawing force in cold drawing of steel tubes with straight internal rifling. Solid State Phenomena. 2020. Vol. 304. pp. 121–125.
7. Kukhar V. D., Kireeva А. Е. The study of stress-strain state of the material at the manufacture of steel axisymmetric products with internal spiral corrugations by reduction method. Chernye Metally. 2020. No. 3. pp. 31–39.
8. Mitin О. N., Ivanov Yu. А. Theoretical and experimental studies of power modes of reduction operations by a profile punch of tubular blanks through a conical die. Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki. 2015. Iss. 6. pp. 327–337.
9. Ivanov Yu. А., Tregubov V. I. Experimental development of reduction of blanks with a riffled punch into a conical matrix. Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki. 2017. Iss. 1. pp. 178–182.
10. Ivanov Yu. A., Korotkov V. A., Kukhar V. D., Larin S. N., Mitin O. N., Tregubov V. I., Yakovlev S. S. Method to manufacture grid of riffles on inner surface of shell and device for its realization. Patent RF, No. 2612052. Applied: 15.12.2015. Published: 02.03.2017. Byulleten No. 14.
11. Yakovlev S. S. Formation of a mesh of riffles on the inner surface of the hollow shell. Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki. 2019. Iss. 5. pp. 330–332.
12. Yakovlev S. S., Korotkov V. A. Analysis of power modes to obtain riffles in a cylindrical shell. Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki. 2020. Iss. 7. pp. 23–26.

Language of full-text russian
Full content Buy