Design & Expert Center, NUST MISIS, Moscow, Russia:

V. I. Suprun, Director, Doctor of Engineering Sciences, labstone@mail.ru
K. S. Voroshilin, Leading Specialist

Sibanthracite Group, Moscow, Russia:
S. V. Burtsev, Chief Operating Officer, Candidate of Economic Sciences
R. R. Minibaev, Operations Manager

The prime cost of coal and carbonate market products depends on grain size composition and strength characteristics of minerals produced. The grain size composition of mineral products is governed by geological structure of deposits and by mineral mining technology. The volumes of geological blocks and grain size distribution in bedded deposits are conditioned by density of natural joints. Blastless mining technologies applied in coal and carbonate deposits produce block sizes which are much less than natural block sizes in rock mass. It is possible to change the actual/natural block size ratio by selective preparation of different mineral layers to extraction with appropriate choice of mining and handling equipment. The grain-size control and preservation of strength characteristics of rocks is possible using specialpurpose blasting techniques and improved extraction-and-loading technologies. In particular, buried blasts at a powder factor of 0.10–0.15 g/m³ make it possible to split a rock mass layer along a system of natural joints. The buried blasting experience is gained in mining operations in Ekibastuz and Shubarkol coal fields, in Dobryatinsky and Kasimov limestone deposits, and in other mineral extraction projects. In order to simplify extraction of heterogeneous layers, it is suggested to reduce the height of an extraction panel to 1.5–5 m and to employ hydraulic rear shovels with special-design buckets in extraction-and-loading.

1. Suprun V. I., Artemev V. B., Opanasenko P. I., Radchenko S. A., Levchenko Ya. B. Sequence of mining of open pit mine fields . Moscow : Gornoe delo, Kimmeriyskiy Tsentr, 2015. Vol. 4. Open pit mining. Book 4. 320 p.
2. Grafe B., Shepel T., Drebenstedt C. Innovations in mechanical rock excavation at TU Bergakademie Freiberg. Scientific and Practical Studies of Raw Material Issues : Proceedings of the Russian-German Raw Materials Dialogue : A Collection of Young Scientists Papers and Discussion. Leiden : CRC Press/Balkema, 2019. pp. 34–45.
3. Kutuzov B. N. Methods of Blasting : Textbook. 3rd edition. Moscow : Gornaya kniga, 2018. Part I: Rock Blasting. 476 p.
4. Abbaspour H., Drebenstedt C., Badroddin M., Maghaminik A. Optimized design of drilling and blasting operations in open pit mines under technical and economic uncertainties by system dynamic modelling. International Journal of Mining Science and Technology. 2018. Vol. 28, Iss. 6. pp. 839–848.
5. Dimitraki L. S., Christaras B. G., Arampelos N. D. Investigation of blasting impact on limestone of varying quality using FEA. Geomechanics and Engineering. 2021. Vol. 25, No. 2. pp. 111–121.
6. Belin V. A., Suprun V. I., Agafonov Yu. G., Kuznetsov V. A. Features of blasting operations in extraction of alabaster in water protection zone. Gornyi Zhurnal. 2017. No. 3. pp. 37–42. DOI: 10.17580/gzh.2017.03.07
7. Jug J., Strelec S., Gazdek M., Kavur B. Fragment Size Distribution of Blasted Rock Mass. IOP Conference Series: Earth and Environmental Science. 2017. Vol. 95, Iss. 4. 042013. DOI: 10.1088/1755-1315/95/4/042013
8. Burtsev S. V., Levchenko Ya. V., Talanin V. V., Voroshilin K. S. Blastless technologies for rock mass conditioning for conveyor transportation. Ugol. 2018. No. 10. pp. 8–17.
9. Vladimirov V. M., Trofimov V. K. Improvement of efficiency of bucket chain excavators. Moscow : Nedra, 1980. 312 p.
10. Repin N. Ya., Artemev V. B., Repin L. N., Opanasenko P. I. Process flows in open pit coal mining. Series: Mining Engineer’s Library. Moscow : Gornoe delo, Kimmeriyskiy Tsentr, 2015. Vol. 4. Open pit mining. Book 6. 560 p.
11. Stromogonov A. V. Justification of blasting-free technology of limestone block cutting in carbonate deposits on the Russian Platform : thesis of inauguration of Dissertation … of Candidate of Engineering Sciences. Moscow, 2017. 136 p.
12. Suprun V. I., Artemev V. B., Opanasenko P. I. Advanced technology and equipment for open pit mining. Series: Mining Engineer’s Library. Moscow : Gornoe delo, Kimmeriyskiy Tsentr, 2017. Vol. 4. Open pit mining. Book 8. 208 p.
13. Stromogonov A. V. Optimization of non-blasting method of carbonate stone block cutting in the Russian platform. GIAB. 2017. No. 9. pp. 185–190.
14. Levchenko Ya. V., Voroshilin K. S., Kazakov V. A., Lipatnikov S. G., Demidov V. V. Formation of open pit mining contours at coal deposits represented by series of seams. Ugol. 2019. No. 5. pp. 43–47.