Журналы →  CIS Iron and Steel Review →  2021 →  №2 →  Назад

Casting and Foundry
Название Research of modification influence on cracking resistance of cast iron in moulds
DOI 10.17580/cisisr.2021.02.02
Автор V. A. Gulevskiy, S. N. Tsurikhin, V. V. Gulevskiy, N. Yu. Miroshkin
Информация об авторе

Volgograd Industrial College,Volgograd, Russia:

V. A. Gulevskiy, Cand. Eng., Lecturer, e-mail: gulevskiy.v@mail.ru


Volgograd State Technical University, Volgograd, Russia:
S. N. Tsurikhin, Cand. Eng., Associate Prof., Dept. “Machines and technology of foundry production”
V. V. Gulevskiy, Post-graduate student, Dept. “Theoretical mechanics”
N. Yu. Miroshkin, Post-graduate student, Dept. “Machines and technology of foundry production”


The research is devoted to determination of influence of grey iron modification technology; this gray iron is used for manufacture of steel casting moulds. Difficult operating conditions stipulate strict requirements both on construction of moulds and on their materials. These moulds materials should reliably withstand to effect of cast steel with the temperature 1600–1700 °C, as well as to thermal shock which is directly proportional to this temperature, to essential cyclic thermal stresses and deformations. Peculiar operating conditions of moulds (such as high heating temperature, mounting on movable and stationary runners, intensive traffic routes etc.) hamper conduction of the required investigations directly during their operation. The research was carried out on physical models of moulds for consumable electrodes of vacuum arc remelting with geometrical similarity scale 1:10. The following mould models for consumable electrodes, cast of iron, were tested: modified by ferrosilicon FS65 (according to the GOST 1415-93), modified by primary aluminium A99 (according to the GOST 11069-2001), modified by vanadium slag ShVD-1 (according to the technical specification TU 14-11-178-86), modified by ferrosilicobarium FSB-30 and by silicomishmetal SIMISh-1. These modifiers were selected owing to their wide use at production facilities. Thereby, the conducted tests were aimed to examine the features of moulds walls deformation and stress-strain state on the models of gray and modified cast iron; they allowed to assess the advantages and disadvantages of obtained structure and graphite inclusions forms. They will also help to develop the most rational form of external surface for moulds designed for section and sheet metal, previously determining destruction features. Application of thinwalled moulds with rational form can provide substantial decrease of their specific consumption. Examination of metal quality which was cast in pilot (lightened) moulds with curved external surface displayed that metal macrostructure for pilot and usual ingots is the same.

Ключевые слова Gray cast iron, modification, mould, cast iron mould models, bending, thermal stress, deformation
Библиографический список

1. Kuksa A. V. Cast iron steel casting moulds. Moscow: Metallurgiya. 1989. 152 p.
2. Kostyleva L. V., Ilyinskiy V. A. Gabelchenko N. I., Pozharskiy A. V., Gulevskiy V. A. Investigations of cooling conditions for cast iron castings. Liteinoe proizvodstvo. 1999. No. 2. pp. 9–11.
3. Leushin I. O., Korovin V. A. Relation between modification and graphitization processes in cast iron. Chernye metally. 2010. No. 7. pp. 30–32.
4. Górny M., Tyrała E. Effect of cooling rate on microstructure and mechanical properties of thin-walled ductile iron castings. J. Mater. Eng. Perform. 2013.Vol. 22. Iss.1. pp. 300–305.
5. Vdovin K. N., Gorlenko D. A., Zavalishchin A. N. Study of the effect of isothermal holding on parameters of graphite phase in indefinite chromium-nickel cast iron alloyed by nitrogen and vanadium. CIS Iron and Steel Review. 2019. Vol. 17. pp. 30–33.
6. Tadesse A., Fredriksson H. Volume change during the solidification of grey cast iron: its relation with the microstructural variation, comparison between experimental and theoretical analysis. International Journal of Cast Metals Research. 2017. Vol. 30. No. 3. pp. 159–170.
7. Hong Nga P. T., Ngoc Thien T., Pritadewi P. J., Phuong V. N. Y. Research on Factors Influencing the Formation Graphite and Effect of Graphite on Mechanical Properties of Grey Cast Iron. International Conference on System Science and Engineering (ICSSE) (Dong Hoi,Vietnam.20–21 July 2019). 2019. pp. 619–629.
8. GOST 1415–93 (ISO 5445–80). Ferrosilicon. Technical specifications and delivery conditions (with Variation No. 1). Introduced 01.01.1997.
9. GOST 11069-2001. Primary aluminium. Grades. Introduced 01.01.2003.
10. TU 14-5-321–2010. Complex graphitized modifiers. Introduced 01.01.2010.
11. TU 14-5-136–81. Alloying compositions with rare earth metals on ferro-silicon base. Technical specifications. Introduced 01.01.1982.
12. TU 14-11-178–86. Vanadium slag. Technical specifications. Introduced 01.01.1987.
13. Theuwissen K., Lacaze J., Laffont L. Structure of graphite precipitate sin cast iron. Carbon. 2016. Vol. 96. No. 1. pp. 1120–1128.
14. Davydov S. V., Boldyrev D. A., Skantsev V. M. Modifying of graphitized construction cast iron. Bryansk: BGTU. 2015. 113 p.
15. Kidalov N. A., Gabelchenko N. I., Belov A. A., Savchenko A. I. Selection of exothermic carbon-containing additives for regulating of cooling mode of iron castings. Chernye metally. 2020. No. 7. pp. 23–27.
16. Gabelchenko N. I., Belov A. A., Kidalov N. A., Gabelchenko A. I. Improvement of mechanical properties of iron castings via adjusting of solidification rate. CIS Iron and Steel Review. 2020. Vol. 20. pp. 17–20. DOI: 10.17580/cisisr.2020.02.04.
17. Davydov S. V., Boldyrev D. A., Skantsev V. M., Popova L. I. Construction cast irons with compact graphite forms. Vestnik Bryanskogo gosudarstvennogo tekhnicheskogo universiteta. 2015. No. 3. pp. 24–29.
18. Gulevskiy V. A., Tsurikhin S. N., Gulevskiy V. V., Miroshkin N. Yu. Investigation of the modification effect on performance properties of cast iron molds. Chernye metally. 2021. No. 1. pp. 23–28.
19. Monastyrskiy A. V., Smykov A. F., Pankratov V. A., Solovyev M. B. Forecast of hot cracks forming and calculation of buckling in castings at SKMLP “Poligon Soft”. Liteinoe proizvodstvo. 2009. No. 10. pp. 27–30.
20. GOST 7164-78. Automatic sensors for GSP watching equilibration. General technical specifications and delivery conditions (with Variation No. 1, 2, 3). Introduced 01.01.1980.
21. GOST 3443-87. Iron castings with various graphite form. Methods of structure determination. Introduced 01.07.1988.
22. GOST 27208-87/ Iron castings. Methods of mechanical testing. Introduced 01.01.1988.

Полный текст статьи Research of modification influence on cracking resistance of cast iron in moulds